Question about Emerson EWF2703 27" TV

1 Answer

Can't get to "Video 1" to play DVDs

I don't have the original remote to the TV. So, this makes it hard for me to work with this TV. When I received the TV from a friend it was on Video 1 permanently and would play DVDs but there were no channels programmed into the TV. Then, I bought a universal remote and I programmed the channels and now I have channels and no Video 1 anymore!!! I can't get the DVD player to play on any channel! Video 1 needs to be programmed into the channels and I don't know how. PLEASE HELP!!!

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Try turning your dvd player on and then doing a channel search if that does not work just buy a RF modulator and hook up your dvd player to it and it will run on channel 3 or 4 and will switch over by itself when you turn on your dvd player

Posted on Mar 12, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Video monitor

you connected the sound via optical spdif .......if the reciever has HDMI use that if the correct device by going through the receivers selector AV, DVD, CD, etc will find the picture when doing this. should work, also ensure the Tv source has been correctly set as the "SOURCE" on the tv remote.

Feb 03, 2014 | Kenwood VR-409 Receiver

2 Answers

Remote doesn't work. have purchased after market units and they don't sync up either? What to do?

Return the tv universal remote where u bought it,get ur money back.If none of the tv univeral romote programming codes on the owner manual codes for ur tv make and model don't even work and don't have any responses for ur tv make and model functioning all.Try website like to buy the tv original remote or a very closed compatible clone one.

Sep 03, 2011 | Toshiba MW24FM1 24 in. TV/VCR/DVD Combo

1 Answer

PS2 will not play DVDs

hEy i hAd the sAme pRob...............dOn wOrRy all u hAv to do is to turn on uR pS2 witthout puttin a DVD oR aNy diSc........on mEnu screen gOto [options] by pRessing 'triangle' button......... a new screen will appear select by pressing 'X' [DISC SPEED]....n sEt it to fAst.....then insert the DVD movie........tURn off n hold the reset button till the blue light is turned on......release the button and press it again.............. it wOuld take a little tYm foR uR DVD movie to be patient till the movie plays it self..............

Jun 13, 2009 | Sony PlayStation 2 (PS2) Console

1 Answer

Remote stopped working

It sounds a lot like the internal IR receiver is bad; they can fail in different ways and they are not user replaceable.

Your set is made by Funai which has a mixed reputation for quality.

If you want to try an 'original,' check here to see if your model number is listed but be advised, the site is not cheap.

Aug 24, 2008 | Durabrand DWT1905 TV

1 Answer

Input channels

I would try to replace the AV switch IC which directs i/o signals to the tv decoding stage.

Jun 25, 2008 | Sanyo DS24205 24" TV

1 Answer


DVDs and CDs are formated with regional encoding 1-6. If your player does not support the format, it will not play the disk. You might try looking up your brand/model player online to see if it has a regional patch code which you can enter via remocon.

Sep 07, 2007 | Pioneer VSX-D608 Receiver

1 Answer

Ringing noise

try changing the cable going out of tv to the system for audio, make sure the cable from tv/sat receiver is in audio out and in dvd player in the Audio In under the Video 1 bracket, then when you turn on the system click function button on the front panel it will show Video 1 on the LCD and that should work.

Aug 19, 2007 | Sony DAV-FC9 System

2 Answers


if your tv is one of the old model you will have to buy a RF modulator or use a vcr.that is to say your tv will have to tune to channel 3 or 4.good luck

Jul 31, 2007 | Toshiba 27A34 27" TV

1 Answer

Home theater reception

you need to unlpug your set and reconnect everything over and see what it does.if that does not work have a tech check your system.your sony recviever is the culprit let that be checked.good luck

Apr 05, 2007 | Sony KP-53XBR45 53" Rear Projection...

Not finding what you are looking for?
Emerson EWF2703 27" TV Logo

224 people viewed this question

Ask a Question

Usually answered in minutes!

Top Emerson Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74999 Answers

matt martin
matt martin

Level 3 Expert

1213 Answers


Level 3 Expert

5318 Answers

Are you an Emerson Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides