Question about Samsung PCL5415R TV

1 Answer

Clicking sounds When turned on after few mins screen goes blank and a clicking sound comes from the unit as if its turning on and off one after the other, it only stops when I unplug the TV. Sometimes it operates for couple of hours before doing that and there are times where itsa coupl of mins. my e-mail is rpetro3352@charter.net . thanks.

Posted by on

  • rafnad Feb 26, 2008

    Dont have manual but if I can get it through the web wat is it that Im looking for in the layout diagrams.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 281 Answers

You must obtain the service manual and identify the parts from the layout diagrams.  It is not an easy job and is even one that advanced tv techs have trouble with.

You may want to spend the money to have a qualified expert do the job because the set should be analyzed first to make sure you know what is causing the problem.  I can only be about 70% sure by long distance diagnostics!

Posted on Feb 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Our TV whiel watching has a blank screen the comes


needs screen adjustment. knob located on flyback transformer

Nov 15, 2009 | Sony FD Trinitron WEGA KD-36FS130 36" TV

1 Answer

Turns on then goes blank with sound only. After a


When the tv goes off and you still have sound take a bright flashlight and shine it at the screen from a couple of iches away and see if you can see any video.If you do the problem is the backlight.If you don't see any video you would have a power supply problem.

Aug 22, 2009 | Standard (CRT) Televisions

1 Answer

No power to TV - No Screen - No sound


check the fuse, I found my had blown and that's what it was sort of. Light doesn't flash any more but nothing comes on

Aug 10, 2009 | Toshiba 32HFX72 32" TV

1 Answer

TV turns off by itself


Thus the line connected to a surge protector or some kind of line protector. This can be consider.

Or if this is a crt type tv. This could be a fault on high voltage section. Horizontal output transistor or flyback. But check also for loose connection/solder crack. That clicking sound may be the relay in action.

hope i give some correct input.

Apr 23, 2009 | Samsung PCL5415R TV

1 Answer

Screen goes black every few seconds but have a picture


Sony incorporates a video blanking circuit that blanks the picture out when the picture tube begins to get weak. sorry, but short of replacing the tube, there's no lasting solution to this problem. I used to have some success rejuvenating the crt, but I found that it didn't last but a few hours before the blanking circuit starts to activate again.

Apr 01, 2009 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

TV SREEN GOES BLANK, BUT AUDIO CONTINUES NORMAL,


Try unplugging for 36 hours. I had the same problem but with no sound and picture

Mar 03, 2009 | Sony KP-53HS10 TV

2 Answers

Philips TV 27PT543S37A


ctgarden girl, my set does the EXACT same thing! I too wondered if a cold room was an issue. The set is only 4 years old, and I didn't have this problem in my old place where the room was a lot warmer.

Can someone please help?!?!?!?

Jul 08, 2008 | Standard (CRT) Televisions

2 Answers

Tv screen goes black


No, if the picture of your tv screen is clear when when you watching. the troble of your tv is looseboard, and you replace your CRT socket too.

Apr 16, 2008 | Sony KV-35V35 TV

1 Answer

My Sanyo HT28745 28" HDTV clicks but doesn't turn on


I have had a similar problem with my tv, it has something to do with the power supply.Try unplugging your tv from the AC outlet. While unplugged from the power supply hold down the - volume control and then plug the tv back in while holding down the - volume control. It should bring up the service screen. If the screen turns on and is blank then it may need to be brought in for repairs.

If the screen does turn on, either blank or with the service menu, turn off the tv and unplug it from the power supply again. With it still unplugged hold down the power button on the tv and then replug in the tv. continue to hold down the power button until the tv displays a video signal on screen.

Feb 02, 2008 | Sanyo HT28745 28" TV

2 Answers

Sony Trinitron 36" TV


Try a "hard reset"===unplug AC for a long time, like overnight.Let me know if there is any change.

Mar 07, 2007 | Sony FD Trinitron WEGA KD-36FS130 36" TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68323 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Samsung Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...