Question about Fantom Titanium Hard Drive

1 Answer

Is it broken?

My light comes on and shows blue, but my computer won't read the drive, it just doesn't show up. And isn't it supposed to start up like a fan when it is running?? It's not doing any of that.

Posted by on

  • nervousnelly Feb 26, 2008

    Thanks, but I've looked all over for these drivers, that is the first thing that I thought of. I looked at the cables like you said and those are fine. The only drivers on Fantom Drivers' website even close to mine are
    Fantom Drives Titanium II USB 2.0 Hard Drives. And they don't even provide drivers, just the manual. Any idea where I can get them?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 72 Answers

Try opening the drive and check the cables inside, try removing the IDE or SATA cables and try reinserting it again. then test if it works, if not try it on another PC, if this doesn't work, try installing the drivers for your hard drive and retest

Posted on Feb 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a seagate barracuda 7200.2 and a i/o magic usb hard drive enclosure. it runs fine blue light comes on but,.....it doesn't show up on comp.


Have you tried the hard drive outside of the enclosure? Maybe it just isn't compatible with it. Else something with the connector could be broken

Jan 06, 2013 | Computers & Internet

1 Answer

My Iomega hard drive isn't working whenever I plug it in to my computer I hear a clicking noise but no response, meaning my computer or others are not reading it.


noise coming from a hard means that the hard drive is already have a problem and if it is not read by the computer it is already broken you must replace it.

Aug 01, 2011 | Iomega Computers & Internet

1 Answer

Hi. my flash drive light comes on as i put it in. it stays on momentarily but after three seconds or so th ligh goes off. it doen't even show up on my computer


Flashing light means your flashdrive is being read. Try it on another computer, if it still can not be detected then it is broken.

Hope this helped! =)

May 19, 2011 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

2 Answers

Drive is not working. When you turn it on the blue light lights up but then goes off. The red light on the back stays on but the CPU does not recognize it. I have changed USB ports but it still doesn't...


please right click computer then Manager under storage, click Disk management. if you see you usb drive there, simply right click on it and format to exfat. fat32,or ntfs. if it doesn't show up, it pretty much shows that it needs an upgrade.

May 08, 2011 | SimpleTech SimpleDrive Pininfarina 320GB...

1 Answer

The drive is not recognized by Windows or Mac


You should give Test Disk a try. It's a little complicated at first but if you read the tutorial it's easy.

Here's a link to their wiki page.

Nov 24, 2009 | Memorex Mega Travel Drive HDD 12GB 12 GB...

1 Answer

WD800U017 passport problem


The drive in the case is broken. You will have to take the drive to data recovery centre to recover your data.

Aug 03, 2009 | Western Digital Passport WDXML800UE...

1 Answer

Red Light/Blue Light I/O Error


My nx2 is working again after having the "red light/blue light/I/O Error" problem. I just:

1. turned off my computer
2.unplugged the HD,
3. took out the HD from the enclosure and plugged it back into the enclosure,
4.started up my computer without the HD being plugged in
5. after my computer had been on for a minute, I plugged the HD in and my computer recognized it and had the proper mixture of red and blue light coming from the HD, indicating it's working properly.

Good luck!

Aug 26, 2008 | NexxTech Portable Hi-Speed USB 2.0 Kit...

1 Answer

My Samsung HDD SP0802N 80 GB PATA says read error and not booting


dear suresh

just trying using hdd utility like partition magic or with disk management in window

but i supposed to fixed it in another pc , you can partition it with two or three partition
after that youcan format it

oke

cropp

Mar 18, 2008 | Samsung SpinPoint P80 SP0802N 80 GB Hard...

Not finding what you are looking for?
Fantom Titanium Hard Drive Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fantom Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Cindy Wells

Level 3 Expert

4805 Answers

Jim Goldsmith
Jim Goldsmith

Level 3 Expert

1869 Answers

Are you a Fantom Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...