Question about Dryers

1 Answer

Kenmore He2 front load dryer

My 2005 dryer flashes an error code of f 26. It comes on normaly yet when the start button is pressed the code comes on and the dryer does not start. Suggestions?

Posted by on

  • Anonymous Mar 30, 2014

    f-26 error code comes on and dryer will not run

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Dryers Master
  • 2,651 Answers

Cant seem to find a fault code f 26, if you remove the top panel on your machine there should be a tech sheet explaining most f codes on the right side in an envelope, if not remove bottom panel (its in there somewhere)

Posted on Feb 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sears Electric Dryer is flashing F01 What is wrong?


The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines. You may be able to clear this code by unplugging the washer for 5 minutes. If the code returns after plugging the washer back in, then the electronic machine control board will need to be replaced.
You can order a new control board from the Sears PartsDirect website.
http://www.searspartsdirect.com/partsdir...
Here's how to do it: http://media.fotki.com/1_p,wkwdftgtbkdgf...


Error code on dryer F01 - Kenmore Elite HE3 Dryer - iFixit

https://www.ifixit.com/.../Error+code+on+dryer+F01 Traduire cette page The F01 indicates a failed electronic machine control board. This error code can ... The Kenmore Elite HE3 is 7.2 cu. ft. capacity electric dryer by Kenmore.

Dryer Sears / Kenmore HE3 - F01 Error Code Main Circuit ...

2q==? 7:35 https://www.youtube.com/watch?v=eWqrn5klxm0 20 avr. 2015 - Ajout? par Jim Dandy Sears Kenmore Dryer Model HE3 - F01 Error Code. Main Circuit Board Repair - Electronic Control Board ...

Error code F1 on Kenmore HE2 electric dryer appeared ...

www.shopyourway.com > ... > Questions Traduire cette page Sears Kenmore HE2 electric dryer; model #11087571601. F1 error message appeared ... Power it back up and see if you still get the F01 error code. If not, then I ...

What does the error code F-01 mean on my Kenmore front ...

www.shopyourway.com > ... > Questions Traduire cette page By unplugging and plugging in the electrical cord, I got the dryer to work again. ... What does the error code F-01 mean on my Kenmore front loaded HE2 dryer? ... My kenmore washing machine 110.46462500 is flashing an error code F.01 ...

Error code on dryer F01 - Kenmore Elite HE3 Dryer - iFixit

https://www.ifixit.com/.../Error+code+on+dryer+F01 Traduire cette page The F01 indicates a failed electronic machine control board. This error code can ... The Kenmore Elite HE3 is 7.2 cu. ft. capacity electric dryer by Kenmore.

Dryer Sears / Kenmore HE3 - F01 Error Code Main Circuit ...

2q==? 7:35 https://www.youtube.com/watch?v=eWqrn5klxm0 20 avr. 2015 - Ajout? par Jim Dandy Sears Kenmore Dryer Model HE3 - F01 Error Code. Main Circuit Board Repair - Electronic Control Board ...

Error code F1 on Kenmore HE2 electric dryer appeared ...

www.shopyourway.com > ... > Questions Traduire cette page Sears Kenmore HE2 electric dryer; model #11087571601. F1 error message appeared ... Power it back up and see if you still get the F01 error code. If not, then I ...

What does the error code F-01 mean on my Kenmore front ...

www.shopyourway.com > ... > Questions Traduire cette page By unplugging and plugging in the electrical cord, I got the dryer to work again. ... What does the error code F-01 mean on my Kenmore front loaded HE2 dryer? ... My kenmore washing machine 110.46462500 is flashing an error code F.01 ...

Feb 04, 2016 | Sears Kenmore Elite Electric Dryer 69278

2 Answers

Kenmore he2 front load dryer


door switch error...implies the door is ajar..or that the switch is not working.

Feb 26, 2008 | Dryers

1 Answer

How to fix front light panel flashing? no buttons are working


on some makes, plugging it back in while holding in the on/off button will reset panel. cannot hurt to try. good luck.

Mar 09, 2015 | Kenmore HE2 6.7 cu. ft. Gas Super Capacity...

1 Answer

What is the f-26 error code kenmore he2 dryer


motor/drive failure. a trained technician should perform a diagnostics check to determine if it is a electronic or motor malfunction.

Aug 13, 2014 | Kenmore Dryers

1 Answer

Kenmore he2 dryer when pushing the start button, it will click and then the digital readout flasshes an F then it flashes 26 got any ideas?


PRESS STOP OPEN DOOR PRESS BLACK BUTTON MIDDLE OF MACHINE ABOVE THE LACTH U WILL HEAR A CLICK THAT RESOLVE THE SITUATION

Aug 19, 2009 | Dryers

1 Answer

LEQ2152ES 2005 dryer shuts off when start us pushed


The belt can be replaced as follows.
1 remove top and front of dryer shell
2 belt goes around drum around motor pully then under tentioner wheel
3 replace front and top of dryer
(top pops off use a slotted screw driver)
Thanx for using Fixya Please take your time to rate me

Jun 14, 2009 | Frigidaire GLEQ2152ES Electric Dryer

2 Answers

Kenmore he2 electric dryer error code f-01


always unplug for 10 minutes and retry first.

Jun 12, 2009 | Kenmore 82822 Electric Dryer

1 Answer

Start button pressed in and now won't start


you should have a tec come by and take a look thats a five min. job the sping insinde probly broke. hope this can help you.

Jan 02, 2009 | Kenmore 82822 Electric Dryer

1 Answer

Kenmore dryer HE2


my kenmore he2 gas dryer runs for 2 or 3 minutes the shuts off, flashing an f22 error code

May 05, 2008 | Kenmore 85871 Electric Dryer

4 Answers

Kenmore HE2 Dryer makes three beeps but wont start


The Kenmore HE2 model numbers 8757 and 8758 are the beepers. Everything comes on as normal. You press the start button and it beeps several times and then beeps again, again, and again. It will not start or turn at all. I did notice the drum light was blown. I have not replaced it yet, but could something so simple be the problem?
Ed G

Mar 23, 2008 | Dryers

Not finding what you are looking for?
Dryers Logo

Related Topics:

509 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...