Question about HP LaserJet 4100n Printer

2 Answers

Error OUTPUT BIN FULL. Please help tried almost evertghing.

Posted by on

  • Anonymous Sep 12, 2008

    output bin is full

  • azzaalhajri2 Nov 02, 2008

    my printer give amessage output bin full.

    what dose it mean the out put bin full

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 32 Answers

A flag in the output bin is activated. This flag moves up while the paper is making its way out of the printer and drops as soon as the paper drops into the output bin. When the tray is full the flag will stay activated or in the "up" position instead of down. Telling you to empty the bin.
You can see this flag in the center on the delivery assembly(where paper exits). The flag should be free to move up and down. Gently see if the flag will come loose. This flag is delicate so if you push or pull to hard you will break it.
The only other way to lease this flag would be to remove the top cover and reposition it. Of course this would be a little more involved and would require a new set of instructions.

Posted on Nov 19, 2008

Hello sir, my printer is taking 3to 5,6 pages of paper ,what can i do that??

Posted on Jul 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to output bin empty ?


  1. The output bin may be full. Empty the output bin. Printing resumes automatically.
  2. Take a close look at the flaps hanging out the exit of the printer. They should move up and down freely. If one of them is stuck up, broken or dislodged, then a bin full error is displayed.
  3. Open rear exit tray and power on the printer. If the printer comes to a Ready state, close rear tray and try printing.
  4. Clean the paper path below the toner area and exit assembly at the back of the printer. Ensure there is no pieces of paper stuck in the paper path of the printer.

Jan 20, 2015 | HP LaserJet 5200 Printer

1 Answer

REMOVE ALL PAPER FROM BIN ,OUT PUT BIN IS FULL Hi


Does not sound like a paper jam problem but a sensor problem sensor acurator is broken or out of place or the sensor is bad worse case the control that the sensors reports to is bad. Check you Output Bin Sensor acurator.

Sep 06, 2013 | Minolta QMS PagePro 9100 Laser Printer

2 Answers

Standard bin full


Hello,

This error is cause by either having your output paper bin full of paper or the flag sensor out of alignment where the paper comes out of the top. Look at the top f the printer where the paper comes out and you should see a black plastic sensor flag, it should move freely. If it is stuck remove the top cover above it and try to free it so it can move. Below is a picture of the printer with the output sensor flag circled.

2_18_2013_4_32_29_pm.jpg

Feb 02, 2013 | Lexmark T632 Laser Printer

1 Answer

Output bin full error flag broke


You need to replace the Output Bin Flag. Please call our Technical Support Hotline on 1-800-539-6275 or contact an Authorized Service Provider near to you (click this link: http://bit.ly/UeQhSB).

Jul 07, 2012 | Lexmark C762 Laser Printer

1 Answer

Hp 5550n error - standard output bin full please remove all paper from bin


After print paper reaches upper bin, you can observe a flag moving while paper coming out. once this flag is stopped moving printer treates bin full..check the flag is moving freely. open top cover clean this sensor.

Sep 21, 2011 | HP Hewlett Packard LaserJet 5550n Printer

2 Answers

HP Laserjet 5200 top bin full


Hi, Remove all the papers from out put bin & check if not solved remove both side and top covers absorve right side of the out put bin flag sensor clean it with high pressure air or clean with dry cloth gently. Best of luck...Vinay

Apr 18, 2011 | HP LaserJet 5200 Printer

4 Answers

Output bin is full error on hp laserjet 2055


check the flag that hangs down as the paper is exiting printer.... sometimes the flag gets stuck in the up position..(causing the printer to think there's a big stack of paper needed to be taken off the machine

Feb 05, 2010 | Minolta QMS PagePro 9100 Laser Printer

Not finding what you are looking for?
HP LaserJet 4100n Printer Logo

306 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96417 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...