Question about Lite On LVW-5115GHC+ DVD Recorder

1 Answer

Wrong signal type

Every time i try to record from playsation 3 it says wrong signal type why, i can see the picture but when i try to record it says "wrong signal type"

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I had this problem. It turns out that the recorder doesn't support 60hz recording. When I put my Xbox onto 50hz, it allowed me to record perfectly....however, most games require 60hz so this meant i couldn't record anything.

Posted on Jun 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The recorder says d v d 3 and will not work


DVD-3 is a typ of format in DVD writing. [Double layer writinng]. Your set might haven't the facility to read these type DVDs.

Apr 16, 2012 | Televison & Video

1 Answer

Scheduled a timer recording of a program on a DVD+R and when I went to play it back all I got on the screen was noise and snow. I now realize that I used the wrong disc (should have used only DVD-R). ...


Hi,During timer recording adjustment you must have selected what ever you want to record..i.e: Tuner Channel , or ,Video1 input ,or Video 2 input etc..This problem is related with Source selection but not with - + type Disc..wrong disc will refuse to record at the beginning..

The noise and snow shows that your recorder was Recorded an unadjusted RF channel..thus no TV signal was available during recording ..
I assume that your DVD recorder has built in TV tuner in...To correct the problem,first you make an automatic Ch set up ,search the available channels either on the Cable (if you have ) or RF local channels thru Arial Antenna..
than you try to record again by carefully selecting ..you will record TV RF channels successfully. Or you can attach another video source to your Recorder thru the RCA cables on the back panel and by selecting the respective SOURCE in accordance withe cabling you have made than you will record the AV signals available on your Receiver..
If you need more help pls let me know for further advise.

Aug 10, 2011 | Toshiba DVD Recorder

1 Answer

Small picture from player (not wide screen)


Set the all settings to wide, not auto as if the player is set to 4:3 format then this sends a signal to the tv telling it so.Go into the setup menu and choose picture format set to 16:9 or wide. Set the tv to auto and this will keep all picture inputs to origional format. I.E. if it was recorded in 16:9 it will play in 16:9. You could set the tv to 16:9 but it will distort the picture on 4:3 recordings.

May 31, 2009 | Sanyo DRW-1000 DVD Recorder/VCR

3 Answers

Dvd/vcr recorder stops recording


I found this web page. I think something similar is happeneing to me. It is on analog channels when it hits some commercials.

http://hdtv.forsandiego.com/messages/3/6915.html

Nov 02, 2008 | LG DR787T DVD Recorder

1 Answer

Record tv with Panasonic DMR-E75V DVD Player / VCR


Not sure about this, but my guess would be that you don't have the correct channel set on the DVD recorder. It has to be the channel that you use to receive your signal, NOT the channel that you necessarily want to record. For instance- if you use channel 3 to receive your signal from dish, cable etc but want to record a program on (hypothetically) CBS which is (again hypothetically) channel 24 from your dish or cable provider you would go to "Prog/Check" on the remote, highlight the "New Timer Program" line and press "Enter", and then use the numeric buttons to select channel 3 (the channel you use to receive your signal, NOT 24, the channel you want to record). You will have to program your dish/cable box to provide the channel with the content you want to record, in this case- 24.
Not sure if that was your issue, but hope this helps.

Jun 15, 2008 | Panasonic DMR-E75V DVD Player/VCR

1 Answer

1}DVDR 3480 playback on many Dvds widescreen insteadof 4.3 as set. 2) my Vcr. has 3pin phono. Dvdr scart to Phono .Xt2 says nosignal. Phono tophono (cam socket) no signal .cannot copt tape to DVD. 3)B W...


1) The 4:3 / 16:9 option only optimises playback for that particular type of TV. The 4:3 setting also allows you to set the output between:

  • 4:3 PS - expands the picture vertically and horizontally which gets rid of the black bars, but you also lose the left and right edges of the picture.
  • 4:3 LB - Letterbox format, displays the full picture from the disc, with black bars top and bottom.
The PS option loses the bars on 16:9 widescreen DVDs, but may still leave bars on true cinema widescreen DVDs, which are 21.7:9
This is normal.
  • 16:9 - Optimises the picture for a widescreen TV. Again True cinema widescreen DVDs will still have black bars.
2) All of the external inputs will show "No signal" until there is actually a signal playing into them.
EG to copy VHS to DVD, you will need to select the relevant scart or phono input, and press play before the recorder will register a signal and allow recording.
Some bought VHS videos have copy protection, and may cause problems when copying to DVD.

3) Greenish playback maybe caused by colour setting on TV being too high. Also check Hue or Tint settings on the TV, if it has them.

4) For some reason, in their infinite wisdom, Philips omitted the Video Plus facility from this model.

Apr 28, 2008 | Televison & Video

2 Answers

Can't find source


The very same problem i am having, If you find out please e-mail me @ ulcard35@yahoo.com In subject please type DVD PLAYER..Thank you for your help

Feb 20, 2008 | TruTech T650-DR DVD Recorder

1 Answer

Display problems


Macrovision
An analog video copy protection scheme that alters the unseen part of a video signal such that a VCR or other macrovision enabled device may not record the video signal properly. There are several types:
- Automatic Gain Control
- 2-line color stripe
- 4-line color stripe

Symptoms of this include picture fading in and out or color banding of the signal.

Feb 06, 2008 | Zenith DVC2200 DVD Player

1 Answer

No picture


might have to use it thought your vcr cable and tune it thought your tv

Jan 14, 2008 | GoVideo VR3845 DVD Recorder/VCR

Not finding what you are looking for?
Lite On LVW-5115GHC+ DVD Recorder Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lite On Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69654 Answers

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

JOHN TOPLISS

Level 2 Expert

135 Answers

Are you a Lite On Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...