Question about Phones

1 Answer

Onetel OT100 Trio

Hello
I have a onetel ot100 that has become unregisered. Does anybody know how to re-register it to thebase staion or know where i can find the instrictions on line?

Thanks

Mark

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

If you havent sorted it yet - I have a handbook here for a onetel sirius 2000 - it says:

1 press OK on the phone
2 scroll < or > to flashing handset symbol
3 press OK again
4 Press & hold the button on the base station until a beep is heard about 2 secs
5 enter the base PIN at the handset - default 0000
6 press OK again - if successful you will hear a tone and the handset name and number will be displayed. If unsuccessful then Not Reg will be displayed.
Hope this works Regards Tony

Posted on Sep 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do you raise the volume of the incoming call on the handset?


while you are in the call use the keys on the menu in most phones its in teh setup, or just find it in the personalize section or even a button on the side will turn up the volume on most cellphones

May 05, 2010 | Phones

1 Answer

The ringer is turned off on my Cirrus 100 (onetel) telephone


I have the OT100 & to turn ringer off & on you press & hold down the * key until the phone beeps

Sep 02, 2009 | Phones

1 Answer

Freestyle 2200 won't work simply beep 3 times


Hi - I checked all the handsets and found I had two registered as no 2, 1 as 3 and 1 as 4 - NO No 1! I don't know how this happened but anyway I changed the duplicate no 2 to be no 1 and then re-registered the offending handset no 4. All is now fine. The duplicate number may have had nothing to do with the problem of course as unfortunately I didn't try re-registering the offending handset beforehand.

Jun 05, 2009 | British Telecom Freestyle 2200 Trio...

1 Answer

OneTel OT150 Plus Manual required


Hello Mark

To change the ringtone on the main phone just press and hold the "volume" key at the bottom of your keypad. Took me ages until I found the manual for my phones... also online support is non-existent for this line of telephones.

Hope this helps!

Apr 20, 2009 | Phones

1 Answer

Onetel OT2500 - anyone know how to turn answer-phone on?


Press the c/Mute button (Has a tape logo on it) It should say either TAD ON or TAD OFF - presumably yours says TAD OFF!! Press number 8 to switch between TAD ON & TAD OFF.... If Answer is on, you'll hear a double beep and the orange message light will come on.
Regards.. Ray

Feb 05, 2009 | Philips 2252 Twin Cordless Phone

1 Answer

Onetel cordless phone OT350 does not ring


Hi I had a similar problem with my 350, I phoned their support line who said it was not repairable so if you found a solution please let me know?

Aug 29, 2008 | Phones

1 Answer

Onetel 150/250 How to register a phone with a new basestation


Hi, had similar trouble. You need to go the base station and hold down the find handset button for 5 seconds so it flashes and then go through the menu process to register. you will need to type the pin for the base usually 0000 or 1234.

Aug 05, 2008 | Phones

2 Answers

Onetel ot150 plus add handset


I don't have a second handset, but I'll quote from the instruction manual - Try this,

Regsiter up to 5 GAP cpmatible handsets to your OT150 base. New handsets must be fully charged.

You can use the same handset at home as well as the office by registering it to 2 bases.

1. At the base: press and hold "FIND HANDSET". You hear 2 beeps and the in use light flashes. Youa re now in registration mode.

2. At the handset: Press "OK". scroll down (with down arrow) to "REGISTRATION" and press "OK".

3. "REGISTER" is diplayed. Press "OK". Any free base numbers will flash. Enter the number of the base you want using the keypad.

4. Enter the PIN Number (default = 0000) and press "OK"

5. The handset searches for the base and when registration is complete goes into standby mode.

To test the handset is registered. Press "FIND HANDSET" on the base and the handset should begin to ring. Press "FIND HANDSET" again to stop the ringing.


As I say this is taken word for word (with a few spelling mistakes no doubt) from the instructions. I Hope that it solves your problem.

If you still have problems or you don't have the PIN number, the helpline number is 0845 226 7794, or e-mail help@telephoneproducts.co.uk

Mar 09, 2008 | Cable_and_wireless CWD4901 Cordless...

2 Answers

Onetel Magma 300 Manual


Liam, I've emailed you the manual, please let me know if you didn't receive it.

Feb 07, 2008 | Phones

9 Answers

Online manual


Hi - took me ages to work out without the manual, but when you're in the answerphone menu (described above), press 9 (record OGM) then either 1 or 2 (1 for OGM 1 and 2 for OGM2), speak your message, then press 5 (stop), the message will automatically replay, then you're sorted

BRIAN

Dec 27, 2007 | Phones

Not finding what you are looking for?
Phones Logo

Related Topics:

316 people viewed this question

Ask a Question

Usually answered in minutes!

Top Phones Experts

kakima

Level 3 Expert

96738 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4762 Answers

Are you a Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...