- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
press the disp button and release then press again for 2 seconds it will start flashing and then use your forward or back buttons to set your time when you have the correct time time press the disp button again and release to set the time.
1> Press and hold the select button. The setup display appears.
2> Press the select button repeatedly until "CLOCK-ADJ" appears.
3> Press (DSPL). The hour indication flashes.
4> Rotate the volume control dial to set the hour and minute. To move the digital indication, pres (DSPL).
5> Press the select button. The setup is complete and the clock starts.
To display the clock, press (DSPL). Press (DSPL) again to return to previous display.
The clock uses a 12-hour digital indication.
1 Use MULTI-CONTROL to select CLOCK SET. 2 Press MULTI-CONTROL to display the setting mode. # Press BACK to return to the previous display. 3 Press MULTI-CONTROL to select the segment of the clock display you wish to set. Each time you press MULTI-CONTROL, one segment of the clock display is selected. Hour—Minute As you select segments of the clock display, the selected segment blinks.4 Turn MULTI-CONTROL to put a clock right. # You can also perform the same operations by pushing MULTI-CONTROL up or down.
to set the clock just press and hold the DISP for 5 to 10 seconds, button while the clock is is displayed. When the the time starts flashing, use the DISP button to adjust the time. When you have the correct time, just hold the button until the clock stops flashing and you're done.
Upper right-hand corner, there's a button next to the "eject" button. Pressing this button while the unit is on will cycle between displaying the clock and the track number & play time (CD) or clock & radio station.
When the unit is off, you can press the same button to completely shut off the display, which is sometimes nice if you don't want the blue ring around the volume knob glaring in your face.
In your Instruction Manual you will find the steps for setting the clock for your unit. Please refer to the MENU section of your manual. Please note, to be able make specific setup changes to your KENWOOD unit you must do them while you are in the “MENU MODE”.
· First, press the SRC button repeatedly until it displays STANDBY. · Then hold down the Menu button until MENU is displayed. · Next press up or down on the right control knob, to scroll up or down, until the display reads “Clock Adjust” (CLK ADJ) · Next press in the control knob, like a button, until the time starts flashing. · Use the right control knob to adjust the setting; Up/Down adjusts hours, Left/Right adjusts minutes. · Now press the Menu button to exit.