Question about Symbol LS2208 Handheld

1 Answer

HPLS2208 needs enter after scan

Our office has ordered two different sets of the HPLS2208 at different times (same model number). In our application one of the scanners needs an enter after the scan and the scanners purchased with the second batch do not need an enter after the scan. Do you know why the same model number would react differently in the same application? We did not do any specific configuration with either batch...just plug and play.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Check to see if there is a scan book that came with it. It will allow you to program the scanner to automatically read the code and enter after every scan.

Posted on Mar 31, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a problem with the scanner Motorola MC9200. Scanning application that I use in my company automatically enforces capital letters capslock.


Look at have problem with the scanner Motorola MC9200 Scanning application that... .

motorola Support

Mar 13, 2015 | Motorola Computers & Internet

1 Answer


Every make and every model go together differently. At the same time none of the gaskets and such in a carburator are reusable. Your best option would be to take the body of your carb with you to an auotparts store and get a rebuild kit for it. They need the body to get a model number that will give you the proper pieces to rebuild. Don't throw out any of the old gaskets as they will be needed to ensure the proper ones are reinstalled.The kit will have at least 2 choices, depending on application. The kit will also have anexplided view of the carb and it's parts numbered for order of removal. It will also have procedures for properly installing and setting up internal parts.

Oct 19, 2014 | Cars & Trucks

1 Answer

How do i change scanner settings

left click start menu left bottom corner of desktop
find all programs listing
Look for a program called hpscan

Jun 26, 2017 | HP Officejet Pro 8600

1 Answer

ScanAllPro starts, chose the scanner shows the error: scanner is not connected or another application is using it. but no application is used at this moment. and the test with document scanning by...

Hi,Make sure that the driver selected on the [Scan] tab of [Preferences] in the [Tool] menu is installed correctly.Specify which driver is used for the scanner, the TWAIN or ISIS/VRS driver. When a scanner is no longer connected to a USB port to which it was previously connected, this option checks if any scanner of the same model has been connected to the other USB port. If the same model is found there, this option automatically switches to the other port and inherits the settings of the same model.

* This option will not be available, however, if a different model has been connected to the port where the scanner was previously connected. * Disable the settings when you want to connect more than one scanner of the same model to your computer.
Hope the above information is helpful.

Jun 24, 2011 | Fujitsu fi-5120C

1 Answer

Hi im puneet frm karnal haryana . i want to knw how to do the on line registration of passport

This article is on how to apply for an Indian Passport Online. It must be remembered that you only register your India Passport application form through this process. But you must in any case visit your respective passport office, to submit the passport application form.The advantage of registering a passport application online is you do not need to obtain a token number for submitting the application at the Regional Passport Office. You don't even have wait long in the queue!!

Registration of passport application forms online can be made for the following.

Download in English (from
Download in Hindi (from

You are however advised to read all information on the website of your regional passport office before registering your passport application online.You can access these websites through the home page of here and choose "Select Passport Office for Home Page" from the drop-down.

Next, go here and click Continue (at the bottom of the screen) to register your passport application online with the respective offices.

After registration, you will be asked you to Open/Save your application form. After Open/Save, you will have to print the application form. If you are not able to print the application form for any reason, you must note down the passport application number. With the help of this application number and date of birth, you can re-print the application form later. Note that you can also print the application if you have Saved the application.

After printing the passport application form, fill up the form and visit your Indian passport office to submit it. You will also have to pay the fee, and submit supporting documents such as date of birth certificate etc., along with the passport application form, on the appointed day and time. The date and time of appointment at your jurisdictional Passport office will be informed by the on-line system and will also be printed on the application form!

You should be at your Regional Passport Office, 15 minutes before the appointed time and Proceed to your respective counter. You can them submit your passport application form, along with all supporting documents and pay the fees.

Mar 02, 2011 | Computers & Internet

1 Answer

Reference Number : W183881 Application Date : 09/07/10 Applicant's Date of Birth: 01/09/1978 I had applied for my passport on 7th Jul 2010 but I have not received my passport till now. The police...

ya now the rules in the passport office has been made strict as per the government order so it may take time to recieve the passport by you so contact the person near passport office to make ur work fast...........

Oct 28, 2010 | Computers & Internet

1 Answer

Error in scanner. Turn off scanner and follow instructions in manual.Scanner driver will be closed. (code:201) Unable to open TWATN source Please check connection Then re-start Toolbox.

This error can be caused by many different issues. Try the following resolutions in order until your issue is fixed-

1. You should disconnect and reconnect the USB cable at both ends to ensure there is a secure connection on the device side as well as the computer side. It may also be necessary to try a different USB port on the computer. Additionally, you may need to disconnect other USB devices, temporarily, in order to determine if a conflict exists.

2. unistall and re-install drivers-
1. Place the CanoScan Setup CD-ROM into the CD-ROM drive.
2. When the CanoScan Setup Utility menu appears, click the option to 'Uninstall the Software' and then follow the prompts.

3. Disable Third-party Software
Software applications that are active during installation can cause errors, installation difficulties and even abort the installation.*1 Close all running applications, including anti-virus programs, before installing Canon Software. You can also prevent these applications from starting through 'System Configuration Utility' (also referred to as 'msconfig') in Windows 98/Me, Windows XP and Windows Vista.

If your computer is part of an office network: Network permissions, security software, etc. may be interfering with proper communication. Please contact your System or Network Administrator before attempting to disable software on your system.

a. See your applications' documentation for instructions on how to close it.

b. If you are unable to locate the documentation or the application appears to be running after it is closed, disable the startup items in the Windows 'System Configuration Utility'.

c. If disabling startup items in 'msconfig' does not correct the issue, disable non-Microsoft related services in 'Services' tab of 'System Configuration Utility' window.

d. Attempt to install the Canon software (drivers). If the drivers were already installed, uninstall them (keep the third-party software disabled) and then reinstall the drivers.

e. After installation is complete, set 'msconfig' back to 'Normal Startup'.


Jul 31, 2010 | Canon CanoScan 3000ex Flatbed Scanner

2 Answers

How do you change the scanners printing order.Mine prints last page first.

you can set it from drivers property page or the printing application too have options to change the print order (says as in MS Word)

Jan 16, 2010 | Epson Perfection 3170 Flatbed Scanner

1 Answer

There is no application registered for this event is the message I get when pressing the buttons on the scanner (email/copy/scan buttons)

In the software setup, there will be a place where you program each of the Application Buttons to access a program you have installed on your computer.

Examples are: Photoshop, Email, OCR, Corel Photopaint, etc. any program that could use a feature called, "Aquire" which is simply getting a graphic from the scanner.

Be shure to install the Applications disc that came with the scanner, (not just the driver). And run the configuration, or settings tool, to set up what programs will run when you press the Quick access buttons on the scanner.

Otherwise, you can access the scanner features from a menu item called "Aquire" in Photoshop, Corel photopaint, or in Microsoft Office it's in the menu, string Insert - Image - from scanner or camera.

There are some complications with the WIA driver, and reccomends using the ScanGear CS software instead. I'm guessing WIA is (Windows Interface Access, or Windows Instant Access) whatever, it is, it is the buttons you're talking about.
I downloaded a driver from Server 1, Here, to get an Idea about your hardware. IF that link dosn't bring you to a site that says,
"Downloading Driver Canon CanoScan LiDE25"

then start here a few steps back, and find your model number in the list.

If you have the driver disc for this device, just use that,
if you have already done that,
find your scanner software on the Start Menu, and look for a configuration tool.

Hope this helps.

Dec 12, 2009 | Canon CanoScan LiDE 30 Flatbed Scanner

Not finding what you are looking for?
Symbol LS2208 Handheld Logo

506 people viewed this question

Ask a Question

Usually answered in minutes!

Top Symbol Computers & Internet Experts

Gareth Cockram
Gareth Cockram

Level 3 Expert

661 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers


Level 2 Expert

51 Answers

Are you a Symbol Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides