Question about NetGear WGR614 Wireless Router

1 Answer

Psp hi, i have a psp that im trying to use to download games etc from my pc, i have a wireless router, netgear, ive tried to enter my wep key into the psp but have no luck. ive checked that its the right number, anyone help to set this up pls? ty

Posted by on

  • acer2 Feb 25, 2008

    don't know how to get my router pass key to hook up my zune.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 47 Answers

You would need to configure your netgear router to accpect trasfers from a multimedia device like psp. and also psp can only support only WPA-PSK (TKIP) Encryption.

Please Follow the below steps to do the same.(please perform the steps in a already connected device like a laptop or a desktop using a Wi-Fi Card.

Step One: open the web browser in your computerthe laand type http://www.routerlogin.net/ or http://192.168.1.1/.

Step Five: it would ask you for username and password. enter Username : admin and Password : password .

Step Six : Confiuring the router.

1) please avoid setup wizard and confure it manually and follow the steps below.

2) you would need to click on left frame buttons for the confgration to come on the right side.

3) On the right menu now click on wireless settings in the setup section.

a) set security option as WPA-PSK the third option.
give a password like "abcde12345" should be 10 charactes and alpha-numerical. ( This option is to make your Wi-Fi more secure and to avoid unauthorized access. Key lifetime : 60minutes

then click Click "Apply"

5) Now on the right menu goto advanced tab and click on UPnP(Universal Plug and Play Devices)

a) Check on Turn UPnP On.

Then Click "Apply".

Router Config Done..Now on the right side click in "Logout" (bottom most option)

after the router logout is done close the web browser and remove the network cable and the the power cable from the router.

Post Configring Steps :
a) Swich off the dsl modem.
b) plug the dsl cable to the internet jack in the router.
c) plug in the router power cable back to switch on the router.
d) Switch on the DSL Modem.

Wait for 15 Seconds.

Connect to you wireless netowrk using you psp and provide the WPA-PSK - TKIP passord which you had given in router for preventing unauhorized access.

Bingo !! you are connected...and more secure.

Posted on Mar 16, 2008

  • Amit Bhasin Mar 16, 2008

    Your Zune would also connect now with the above settings Active.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I cant find my Wep Key, and when i go to the router's IP Address it still wont show my Wep Key


After you log in to the router select Wireless Settings. Under Security Options you should see that WEP is selected. Below that the key will be shown(Key 1, Key 2, Key 3, etc). If not, simply enter a pass phrase then click Generate then click Apply.

Here is a link to your manual:
ftp://downloads.netgear.com/files/WNR3500v2_UM_07MAY09.pdf

Mar 25, 2011 | NetGear WNR3500 Router

1 Answer

My son is trying to connect his PSP game console and it's asking for the security code WEP.


Hi,

This Utility program will help you locate few details of your network like,

1. SSID ( network name )
2. WEP/WPA Key ( Your network security key )
3. The PC/Laptop IP Address
4. Router IP address
5. Which all Devices are connected to your Router/Network Wireless
6. Which all Network are available nearby your place
7. Let you access the Router Configuration

Click here to Download the HP Network Diagnostic Utility

Download the file on Desktop and Run the program ( Ex. File name = HPNDU.EXE )
Follow the Instructions on the Screen and do accordingly.

Hope this is helpful.

* Rating and comments are welcome on this solution

Nov 11, 2010 | Belkin (F5D7231-4) Wireless Router

1 Answer

I dont know my wep key


*For you to know your wep key you need to access your netgear router

*Open any web browser, such as Internet Explorer, Opera, Google Chrome or Mozilla Firefox. In the address bar, enter 192.168.0.1 and press the enter key. This will bring up the login prompt for most Netgear wireless routers. If that doesn't work, try 192.168.0.5, or 10.1.10.1 until the login window appears.


*Enter the username "admin" (again, without the quotes), and the password "password" in the appropriate fields, then click OK to login. If that password fails, try 1234, Password (with a capital "P"), or admin until you are greeted with the settings screen.
*Go to wireless setting then you can personalize your wep key :)

Jul 25, 2010 | NetGear DG834G Router

2 Answers

Cant find my wep code for netgear router


HI,
Please visit the below link to check your WEP key:
WEP key
Hope this helps.
Regards
Anand Gupta

Jul 07, 2010 | NetGear WGT624 Wireless Router

1 Answer

I need my WEP key for my netgear wireless so i can connect to my psp


You may be able to find the key by going into the router's wireless security setup screen through your computer browser. Most Netgear routers use 192.168.0.1 as their address. The key may not display in plain text, though. Some versions only display the key in masked form. It might just be simpler to reset the router by holding in the rear panel reset button while turning the power on, then releasing it after the router starts up. This will set everything back to factory defaults. Then you can enter a new WEP key when you set the router up again.

Mar 15, 2010 | Routers

2 Answers

Cant get online with ps3 since ive purchased a new NETGEAR dg834


Hi, please perform the steps below to configure settings on the router:

Please follow the steps on a computer connected to the router so as to check the network key:
1. Open the browser (Internet Explorer, Mozilla Firefox or Safari).
2. Access the router usually by typing 'http://192.168.1.1' or 'http://www.routerlogin.com' in the address bar.
3. Login to the router with the Username as "admin" and Password as "password" (please note that Username and Password are case sensitive).
4. Click on Wireless Settings (under Setup) from the left menu.
5. Check if WEP (Wired Equivalent Privacy) or WPA-PSK (Wi-Fi Protected Access Pre-Shared Key) is selected under 'Security Options'.
6. If WPA-PSK is selected, copy the code entered in the passphrase.
7. If WEP is selected, copy the code entered in the key that has been checked.
This is the code required for connecting the wireless computer to the router's wireless network.

In some cases, for security reasons the passphrase might show as asterisks. In this case type a new Password and click apply. You will then have to use the same Password for all the wireless devices connecting to the network.
Please scan for the wireless network on the PS3 and connect to the wireless network.


Let me know if you need any fruther help.

Sep 09, 2009 | NetGear DG834G Router

1 Answer

Netgear locking


I'm assuming we mean wireless security?

Run your internet browser - Internet Explorer or Firefox type the router address in the address field (usually http://192.168.0.1)

Default user name of admin and default password of password

Click the Wireless Settings link in the main menu of the DG834GT firewall. There are a number of options available with WEP the most basic. For basic protection select WEP, put in a passphrase (anything you like) and the router will provide you with 4 keys based on your passphrase - take a note of the keys. When you try to connect to the router wirelessly (laptop, game console, etc) the router will require you to input one of these keys to verify your access and that should be it.

For further information to go the netgear website and have a look at the manual - http://kbserver.netgear.com/pdf/dg834gt_manual.pdf

Feb 26, 2009 | NetGear DG834G Router

1 Answer

Lost key for netgear GT834PN


Do one thin connect ethernet cable between ur router and laptop open internet explorer and tyoe in this address 192.168.0.1 and press enter user name and pssword admin and password in lower case press ok router page will open up then click wireless settings on the left and on the right side right at the bottom of the page u will find key1 as ur wep key

Jun 01, 2008 | NetGear WGR614 Wireless Router

1 Answer

Psp connection


the wep key is ur pass word that u made to protect ur wirless signal from hackers. u need to know the passsward.

Jan 14, 2008 | Belkin High-Speed Mode Wireless G Router 4...

Not finding what you are looking for?
NetGear WGR614 Wireless Router Logo

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...