Question about Durabrand STS92 System

1 Answer

STS96 problem I just bought a STS96 model and my son hooked it all up. Everything seems to be ok, except he couldn't bring up the menu on my TV screen. How would he do that? I'm connected to our local cable company so also have their HD digital converter box, so have to use THEIR remote for the TV now, so the TV itself is on channel 4 to be able to receive reception now. How would I get the menu to show up on my TV screen using the remote for my new home theater system? Thanks, Loretta

Posted by on

  • lojo55 Feb 25, 2008

    Thanks, I will have my son try that. Hope it works.

    Loretta

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 76 Answers

Usually you have to press Aux or Acs and hold it down untill it blinks then you have to press in a number that usually is listed in the Cable remote manual then after that it should either blink or stay steady for a couple seconds. Then it should be fixed. Hope this helps. =)

Posted on Feb 25, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My son's Dynex TV has no sound except when he plugs in his xbox. What do I do?


If the TV has sound using an Xbox, then the problem is not with the TV, otherwise you would have no sound no matter what you hooked up to the TV. You may have to adjust the TV menu controls that involve receiving a TV signal that provides both sound and picture.

Nov 17, 2014 | Dynex Televison & Video

1 Answer

Sansui 24 in. Flat screen and hooking up a Xbox


Please open the menu go to color systems and change the setting which brings the colors.

Dec 30, 2013 | Sansui Televison & Video

1 Answer

Memorex MVUC821 TV/DVD. Everything works except the TV.


Just bought the Memorex MVUC821 & the DVD Player will not open using the remote or front panel button!!!

Mar 23, 2010 | Memorex MVUC821 Player

1 Answer

Poor picture quality


Hello Paul. I have this same monitor, but rebranded, Access the service menu with the remote control:

With user’s RC
1. Power TV On
2. Press Menu button and call up User OSD Menu
3. Select Sound-> Balance
4. When Balance value is “0”,Enter 0->5->3 ->2 in sequence.
Note: If necessary, re-do number keys.
5. Factory OSD appears.
6. Press the standby button then AC turn off and restart the TV, which can exit factory
OSD menu.


Now you will be able to change the values for Red Green and Blue channels. I also hated this TV, but after adjusting the colors it's looking great! Hope you could fix it too! :)

Nov 16, 2009 | Televison & Video

1 Answer

I have a 13' Orion tv, model #TV1326BW with rabbit ear antenna. I have connected everything correctly to the converter box for digital signals. I can pick up all stations except the local CBS affliciate....


I have the same TV & cannot get into the TV menu to program the cable... it was bought secondhand without the original remote. There are no buttons anywhere on the TV itself to bring up the menu & the universal remote's menu option doesn't do it, either... how do I set the channels?

Aug 04, 2009 | Televison & Video

1 Answer

Menu not working.........


Resetting the TV
If the buttons on the remote AND the buttons on the TV case do not work (channels do not change and you cannot open or navigate the menu), the TV has stopped responding. Reset the TV as follows:

NOTE:
Some TVs have a reset button. If available and accessible, try using the reset buttons before using the steps below. Using the reset buttons can save time.

clip_image001.jpg
1. Unplug the TV power cord from the power outlet.
2. Unplug any connected devices (DVD, Set-top boxes, etc...)
3. Press and hold the TV power button for five seconds.
4. Plug the TV power cord back into the power outlet and turn on the TV.
5. Open the on-screen menu to confirm that the TV is responding again.
6. Turn off the TV and reconnect the devices.
7. Turn on the TV.

hope this may help;

Regards,
VOTIT

DON'T FORGET TO RATE:

Aug 21, 2008 | Panasonic TC-26LX60 26 in. LCD Television

1 Answer

Desire Audio for Theater System when watching Tv.


hi there

you can hook it up to your tv and make your regular shows sound like theaters too. all you have to do is check with your tv menu and look for a setting there which is similar to hall,theater...etc. not all audio settings has this though.

hope this helps.

Feb 11, 2008 | Audio Players & Recorders

1 Answer

Hooking up ps3


Check system in TV Format Setup:
NTSC or PAL N

Dec 28, 2007 | Onkyo TX-SR803 Receiver

3 Answers

Desire Audio for Theater System when watching Tv.


I can not get model sts96 to display on my tv

Dec 17, 2007 | Durabrand STS92 System

Not finding what you are looking for?
Durabrand STS92 System Logo

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Durabrand Audio Players & Recorders Experts

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

620 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Marvin
Marvin

Level 3 Expert

82322 Answers

Are you a Durabrand Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...