Question about Canon PIXMA MP210 Photo All-In-One Printer

2 Answers

Canon PIXMA MP210 printer all-in-one

Stoped printing half way through page. won't reset. tried turning off then back on nothing. still coming up with flashing light as error e2. no explanation as to what is wrong. can't figure it out. please help.

Posted by on

  • 1 more comment 
  • dono 38 Mar 08, 2008

    tried to print a 4x6 photo. It printed the top part of the picture on the bottom one third of the paper and a little offset to the right. Printer is 4 months old, first try at a 4x6.

  • Cami44 Mar 19, 2008

    only just got the printer and only after loading ink cartridges it flashes E2 green and orange and will not work. Tried switching on and off again and checking ink but nothing seems to work. It's brand new.

  • Anonymous May 05, 2008

    my printer is 1 month old, now it will not pull paper throu, without jamming. THe Paper Jam is always caused by the first rear Paper roller.



2 Answers

Goddman it same issue here - brand new, not working, drives me nuts - anyone solved this yet?

Posted on Apr 05, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,351 Answers

Go to this cannon link & type in the search windows error e2 than click search. If nothing helps or fix's the printer call Cannon.

Canon support:

Good luck!

Posted on Apr 05, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Ive just turned on my Canon pixma mp250 printer and have an Error, the screen is flashing E 0 3??? have tried resetting but that hasn't had any affect.

An E3 error code in a Canon MP210 printer is frustrating. This code reflects a paper jam that is not always apparent immediately and can be indicative of other problems.

Remove the jammed paper by pulling it from the front or top of the printer. If it does not come out, restart the printer to eject the paper. If the paper fails to come out or rips, remove the cover and retry. Once you have removed all visible paper, check paper sensor paths for debris or damage, blowing it out as needed.

Reload the paper as recommended and print a test page using the printer's software. If the error continues, the sensor that generates the error may be damaged. If so, take your printer to an authorized service center.

Aug 31, 2011 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

The printing is wavy coming out of the cannon mp210

You should try to do a Print Head Cleaning cycle.
Follow by an Aligning the Print Head procedure.
Page 29 & 31 of your Quick Start Guide.

Mar 25, 2011 | Canon PIXMA® MP210 Printer

1 Answer

Canon mp210 error 5 ink cartrige can not be recognized. Does anyone have a solution for this, already tried holding stop/reset and turning power on pocedure that didnt work.

Power down the printer completely. Unplug from wall.
Re-insert all cartridges. Then power up It takes a while for the test page to print. After that you should be good to go

May 27, 2010 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

My Canon Pixma MP210 prints only red and blue while the yellow color tank is still full. I tried cleaning, no results. The yellow ink is coming out on the clothing when I clean but still no yellow on the...

Canon makes it ******* owners by using a small electronic chip on each cartridge that opens when it is taken out of the printer. Sometimes removing a cartridge will not open and when replaced in the print head, it works, but if the cartridge sensor fails to communicate with the printer, you would need a resetting device to bring the cartridge back to normal. Rather than become upset with the issue, it would be best to get a new cartridge from any reseller on the internet (not Canon) and go from there.

Feb 20, 2018 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

Error 8 canon mp210

After trying various combinations I have found a HALF solution. Turn on as usual, wait for the E8 to come on then press the three front buttons simultaniously and hold for 5 seconds. You should now be able to use the printer as normal. I say its only a half solution because you will need to do this every time you switch on.

Apr 08, 2009 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

Canon pixma mp210 and compatable ink cartridges

Try pushing the reset button for about 5 seconds. This has worked for me.

Oct 27, 2008 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

Wont print

Replace Catridge and then Check.

Jun 17, 2008 | Canon PIXMA MP210 Photo All-In-One Printer

2 Answers

Nothing will print

5 times The print head is not installed [1401], or it is not properly installed (EEPROM data of the print head is faulty) [1403 / 1405]. Install the print head properly, and close the access cover. Or, with the print head installed, turn the printer off and on. This might help

Mar 10, 2007 | Canon PIXMA iP3000 InkJet Photo Printer

Not finding what you are looking for?
Canon PIXMA MP210 Photo All-In-One Printer Logo

684 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2179 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides