Screen goes backwars or upside down

Go into the menu then the display option. It's probably set for "ceiling mount"

Hi,maybe the screen not suitable or u have to change the flex cable/ribbon...

Use the remote to go into the menu and change the screen position. There are 4 to choose from, flip left, flip right, flip upside down left, flip upside down right. It may be tricky to navigae the menu backward though.

There's a button on the original remote control that does exactly that:

(Please vote or comment if my solution helped you!)

Adjusting PICTURE FLIP Settings
You can set the orientation of the picture.
Directly setting the PICTURE FLIP
1 Press PIC. FLIP to display the
PICTURE FLIP screen.
2 Press PIC. FLIP to change the
setting.

Setting the PICTURE FLIP on the
MENU screen
1 Press MENU to display the MENU
screen.
2 Press a/b to move the cursor to
PRESET, and press ENTER.
3 Press a/b to move the cursor to
PICTURE FLIP, and press
ENTER.
4 Press c/d to select the desired
picture flip setting, and press
ENTER.
5 Press MENU to return to the main
screen.
NORMAL MIRROR ROTATE
UPSIDE DOWN
A•
The PICTURE FLIP screen automatically
disappears in 3 seconds.
• [NORMAL]: normal image
[MIRROR]: mirror image
[ROTATE]: rotated image
[UPSIDE DOWN]: upside down image

The flex strip is cut and thats why you are facing that problem ... please use it the way it works till you can ,,,,, when it completely goes dead have it replaced by a repairman ....

There is a vertical position switch on these models. Probably needs to be replaced.

Hi paulveldt

Very easy ! Simply go into the menu and look for the subfolder that will either read Mirror or Flip Image. Scroll down to it and press left or right until the image is back to normal.

A mountable Projector can project flat fronted ( on a table ) upside down ( on the ceiling ) rear ( from behind - on a rear projection screen ) and upside down from behind ( from the ceiling onto a rear projection screen )

This should do the trick !

Thanks for using Fixya !

in your menu there is a couple of options, one for use with mirror that flips the picture, another that flips the pic for mounting upside down. and another for flipping it upside down with mirror.
please select normal in this option as your prob just mounting it on a desk or table.
good luck

Hi there

Simply go into the menu and flip it back in the subfolder that will either read Mirror or Horisontal / Vertical Positioning

SUENASH - replaced the lcd

GUEST - replace the LCD

GUEST - replace the LCD