Question about Sharp AL-1655CS Laser Printer

1 Answer

Error Message L1-00 Refer to user guide

Everytime I turn on the printer this error message pops up...?
Please help!

Posted by on

  • sweetie01 Feb 25, 2008

    L1-00 refer to user guide error message

  • sweetie01 Feb 25, 2008

    001

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,072 Answers

Here is the issue from the documentation.

L1:Indicates that the Main PWB sensed that the carriage did not leave home after power up or after start is pressed. Turn the machine off and on. And make sure the lamp carriage is moving. If it is not moving, Remove the platen glass, and see if you can move the lamp carrage easily, or if it's binding. Then look to see what it hindering it. If it moves freely and nothing is catching the lamp, the motor has most likely blown a fuse. But,,,,,,,,,,,,,,,,,,,, often times there the lamp is hitting the sensor that detects where the lamp should be when in the park position. You may just have to bend the bracket out of the way or make sure one of the screws on the left side of the glass are not moved down to far.

Posted on Mar 10, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A printer error has occurred. See your printer documentation


Which printer? Try looking for user manual (documentation) here: Download Free Manuals

Jan 05, 2016 | Office Equipment & Supplies

1 Answer

Everytime I turn my printer on (Epson Artisan 700 series printer) it waits for about 5 to 7 seconds and then displays a message that says "A scanner error has occured. Please see your...


when I turn my printer on (Epson Artisan 700 series printer) it waits for about 5 to 7 seconds and then displays a message that says "A scanner error has occured. Please see your documentation". Then all the lights start flashing, And then I cant do anything, but turn the printer off.

I have turned it off and unplugged it and tryed again always same result.

bdl12920@aol.com

May 10, 2011 | Epson Stylus Multifunction Inkjet Printer/...

2 Answers

Today when I wanted to print something the following problem appeared on my Phaser 6125: Error 061-370 My printer is rather new and has about 2000 copies done. I've turned the printer off, waited a...


An internal error has occurred. Turn the printer off and on. If the problem is still there the laser needs to be replaced. If the machine is less than a year old then the machine will be fixed under warranty.

Mar 04, 2011 | Xerox Phaser 6125 Laser Printer

1 Answer

Everytime I turn the computer on a message pops up


I found this on the Canon site, and as I do not have your printer I cannot get to the setup info. I did find, on the My Printer program, something about Printer Settings that will have information on how to print to your printer rather than to a file. I wish I could help more but I cannnot buy a MX300 printer to get the manual. Best of luck to you!

Nov 21, 2009 | Canon MX300 Office All-In-One Printer

1 Answer

Hp 3213 ink systen failure


Resolving this problem are very easy, just follow the instruction in the link website that i give you.

www.yboyandrei.com/HPstuck

Hope this might help you a lot.
Good luck!

If i am helpful to you please rate me.
Thank you.

Yboyandrei

Aug 26, 2009 | HP Photosmart 3210 Printer

1 Answer

HP officejet 7410 error message 223


Hi pilchuck3,
please click on following link and which will help to how to access the ECM (Error Correction Mode), Please turned it off and i thing your issue should be resolved,
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00313088&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN


Regards,  raj_p5983

Dec 17, 2008 | HP OfficeJet 7410 All-In-One InkJet...

1 Answer

Error message everytime i print


the E error message is for 2 reasons.either its a paper jam in the printer or the cartridges r faulty.there r two cartridge 1colour and 1 black.as 1 of them may had gone faulty.just replace the cartridge and it will work properly.

Dec 15, 2008 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

Print cartridge error


Press either the menu or setup button.
There should be a maintenance section where you can do eletronic print cartridge cleaning and print head alignments and calabrations.
Some of them can be done at the computer if you access the driver properties.
You can clich the print queue and look around there also for print head cleaning and some other diagnostic procedures.
If those don't resolve the problem, remove the cartridge and take a fuzzless cloth dampened very slightly with alcohol and clean the contacts to the print cartridge.
PLEASE REMOVE THE POWER when cleaning though.

Dec 20, 2007 | HP PSC 1315 All-In-One InkJet Printer

Not finding what you are looking for?
Sharp AL-1655CS Laser Printer Logo

224 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

257 Answers

k24674

Level 3 Expert

8073 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...