Question about Projection Televisions

1 Answer

My screen is black with no sound--the timer light is flashing. i can unplug the tv and replug it, then get sound for about five seconds. HELP

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had a problem with my Sony Projection TV recently where it went black. I had a burnt out projection bulb which had to be replaced.

Maybe you can check owners manual , it will tell you how to relace it. Hope it helps you out.

pryby

Posted on Feb 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trying to replace lamp in HDTV and having trouble. Does not function correctly after putting in new bulb. Boots up and then visuals go black and the green power light keeps flashing. Help?


Panasonic DLP TV Bulbs

Make sure its an original Osram or Philips bulb inside the housing. If its a cheap lamp it will act this way. If it is an original lamp, then you may have a power supply issue. It shouldn't affect your TV but you may want to try resetting the lamp timer by following the instructions that came with the lamp.

TY-LA1001 Timer reset

While pressing the VOL- button on the projection display, hold down the number 0 button on the remote control at the same time for more than 5 seconds.

Aug 15, 2015 | Panasonic Pt-52lcx16 Projection Television

1 Answer

I turn the power buttin on....after about five


When was the projection lamp last change?If the tv,projection lamp inside the tv at last change was 1/ 1/2 or 2 years ago,and the tv is on,an in use at lest 4 or 5 hours day.The projection lamp life,it over should be change the projection lamp.Now tv turn on LED light "LAMP" indication light up or flashes?Yes,the projection is dead,hear alot of clicking too?The Ballast board it also dead,should be change too.The Ballast board,this board job,it help to ignite the projection lamp.

Jul 23, 2010 | Toshiba TP61H60 61" Rear Projection...

1 Answer

The power went off and when it came back on the tv wouldnt come on but the timer light is lit


First thing is to unplug the TV for several minutes, replug, Power LED shouls flash for around 90 seconds then go off. Try to power up then.
If the power LED does not stop flashing , or the TV will not turn on still, it will need a repairman.

Oct 22, 2009 | Mitsubishi WS-55809 55" Rear Projection...

1 Answer

My Hitachi 51S500 is showing a black screen


Did you unplug the set from the wall and wait 5 min. replug and try. Cusult your owner manual regarding parental Locks?

Sep 17, 2009 | Hitachi 51S500 51" Rear Projection...

2 Answers

Sony KP-41T65


is there a cadence to the blinking timer light?

Jul 17, 2009 | Sony KP-41T65 41" Rear Projection...

1 Answer

Timer light blinks constantly


Hi,
Is it Mitsubishi WD-52628 TV? please confirm model number.
Unplug TV from AC outlet for couple of minutes, replug back in, turn power ON and check, still same problem?
Lets read error code in TV, press Device and Menu buttons on front of TV at same time for 6 seconds that will activate error code read process. Led will flash in 2 sequence with half second pause. count it and let me know the error code to proceed.
Thanks.

Jun 29, 2009 | Mitsubishi WD-52628 52" Projection HDTV

1 Answer

Flashing Green "Timer" light on my Mitsubishi WD-62525


My Sony had the same problem. Unplug from the wall for 36 hours and it should solve the problem

Mar 22, 2009 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

RED TIMER LIGHT BLINKS AND WILL NOT POWER UP HELP


Open back of TV, there will be two STK's (black boxes) unplug the harness connector from the power supply into the stk board and turn on. If you get some light to the screen, you know now to replace the two STK's and then replug the power supply to the convergence board. If that does not work, the power supply may also be bad.

Feb 11, 2008 | Akai PT4298HD Rear Projection Television

5 Answers

No picture but has sound


My LG TV
switch on no picture but short period of sound then nothing

Jan 20, 2008 | Sony KP-51HW40 51" Rear Projection...

4 Answers

TV Picture Goes Black


I had the same exact problem.
I removed the bulb and cleaned it. There is a small screen at the top of the bulb and it was covered with dust. Once it was cleaned I replaced the bulb and it solved the problem.
Thanks to those who posted the solutions

Jul 28, 2007 | Sony Grand WEGA KDF-60WF655 60" Rear...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...