Question about GE DBXR463EBWW Electric Dryer

1 Answer

1-1/2 old dryer keeps stopping

Hello

My electric dryer runs for about 5minutes than quits. The timer is still running but the dryer itself stops. I looked to see if there was lent build up but it wasn't. My model number is: DBXR463ED244.

Please help!

Posted by on

  • 1 more comment 
  • hansec32 May 18, 2008

    My dryer will run fine for 5 to 10 min but stops tumbling. The heating element stays on and the top of the dryer gets really hot. If you restart it after five min or so it will start back up but same problem occurs again.

    GE model DBXR463ED1WW

  • khaine232300 Dec 16, 2008

    so i have this same issue,  i and pulling my hair out, i got a new thermostate and installed it near, it was the some near the motor.  worked great for a few loads.  i have cleaned out the exhaust, and still that same results.  i will clean the motor but i dont see much lint in there.  


    i am not sure what to do now, and i can aford to get a new one. 
    what should i do next.  it is not the location, at all.  it has ran great where it is for almost a year.   



  • kdancerm Dec 28, 2008

    My model DBXR463EG1WW begins drying (tumbling, heating) and then the tumbling stops. The timer is still moving, and it appears the heat is still on because the top of the dryer and clothes are very warm. I can start it again, but it conks out after a few minutes. The dryer is only a little older than a year! (8/2007)

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 958 Answers

Could be a bad motor or timer contacts. can you hear a humming sound coming from the motor if you tried starting it again? if there is none, wait for about 5 mins and try starting it again, hear what happens?..

Posted on Feb 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dryer keeps cutting off and has to be restarted.


There is normally a switch inside the motor that detects in turning at speed. That keeps the dryer running until it is either stopped, the door is opened, or the cycle is through. I am guessing that the contacts are getting bad on this switch.

Jan 03, 2012 | Dryers

1 Answer

The dryer won't stop running after a heating


Hello, Thank You for using FixYa. I will be helping you today.Replace the timer.It has a bad contact.
Thank You and please rate my answer if it was helpful..

Jun 14, 2011 | Kenmore 64882 Electric Dryer

1 Answer

Timer not moving on clothes dryer


You need your timer switch tested and replaced.

Apr 03, 2009 | Dryers

1 Answer

I have a kenmore electric dryer. It dries for about 20 minutes then stops. If you wait for about 10 minutes and start it back up it continues to dry again.


Hello There,

1st- Check to see if your not running on overload with a clogged dryer hose the one that goes outside
2nd- your timer may be going bad or you have a bad sensor thats resetting itself.

Is this a newer model???? What year and model number?

Apr 02, 2009 | Whirlpool LER5636P Electric Dryer

2 Answers

Kenmore dryer keeps on going and going


The timer is bad. It is located behind the knobs and can be replaced really easily. The price for a new timer is about 35 dollars. If this helped please rate

Feb 12, 2009 | Kenmore 64902 Electric Dryer

1 Answer

Whirlpool electric dryer runs only when holding start switch


if you've replaced the board replace the relay to right of bd the one with 2 blue wires to ck before replacing just switch relays the other one with red wires controls the heat

Oct 25, 2008 | Whirlpool LER4634J Electric Dryer

1 Answer

Dryer runs for minutes then stops timer keeps going and going and .....


remove the vent on the dryer that goes to the outside start the dryer if it continues to ru n and not cut off you have a venting problem of the house

if it cuts off after 5 mins with the vent off you have a motor that is going bad

Jun 11, 2008 | GE DBXR463EBWW Electric Dryer

3 Answers

Dryer won't stop running


the dryer wont stop running only when open door will it start a fire?

Sep 14, 2007 | Kenmore 62802 Electric Dryer

3 Answers

Maytag dryer PYE3300AYW Continuously runs


jefo, it sounds to me like your timer is not advancing. Does it move at all or stay in place? In what you are saying it will stop when you turn it to off, I would think it could be the timer that is the problem. Part # 53-1810.

May 19, 2006 | Maytag PYE2300AY Electric Dryer

Not finding what you are looking for?
GE DBXR463EBWW Electric Dryer Logo

Related Topics:

367 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Dryers Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Melissa Martin
Melissa Martin

Level 3 Expert

676 Answers

ancel1961

Level 1 Expert

16 Answers

Are you a GE Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...