Question about KitchenAid KEBC107 Electric Single Oven
I have a single OVEN KitchenAid Architect Series KEBC107KSS. Recently, after my wife used the self cleaning cycle, the oven quit heating. Everything else works. The control panel beeps normally and the proper indicators and lights light up when the functions are pushed. The convection fan in the back wall of the oven turns. But, we cannot get any heat. I suspect a sensor or thermostat of some type. Any suggestions on where to trouble shoot?
I have a built in kitchenaid oven which I have had for over a year.. Ran the self clean cycle yesterday. Now the oven won't heat. I can't believe how many people have had this same problem. It sounds like we will be replacing the thermal fuse thermostat. Any details on how to do this?
KitchenAid KEBC107KSS does not heat hot enough and does not heat evenly. When the temperature is dialed higher, it burns the cookies. When the convection fan is on, it has a 'cooling effect' so the temperature never reaches the proper level. Is this problem repairable? Or is this a thermostat issue? Thank you for your help!
Posted on Jul 17, 2009
You need to remove the oven from the cabinet, the fuse is located on back wall about 6 inches down directly between broil element leads
Posted on Feb 24, 2008
My kitchenaid oven locked on the clean cycle. I unplugged it and a friend actually had to saw threw the metal lock. Now my oven has stopped working again. I would NEVER again buy anything Kitchenaid.
Posted on May 08, 2009
I think I read that whirlpool has issued a service bulletin for this self cleaning problem Jan 2009. does anyone know if this is now corrected? I am buying all new appliances and wife is liking the KA kebc107ss ove the GE profile
Posted on Mar 05, 2009
SOURCE: OVEN will not heat
I have the same model, 3 yrs old, and the exact same thing happened. KitchenAid made the appointment with a repair company and when the tech came out the first thing he said was "you can never use the self cleaning cycle because this always happens.' He replaced the thermal fuse thermostat and said that a lot of times the digital panel will go out and that will cost around $400. The cost of the thermal part was $80 plus his $90 labor charge. I called Kitchen Aid back, and they swore they never heard this complaint...all you have to do is look on line to see it is a major complaint!
Posted on Nov 02, 2007
SOURCE: OVEN will not heat
After reading the above, here is how I fixed my KEBS177DSS9
I pulled out the wall oven from the cabnet. Took off the back tin panel about 10 tin screws. Follow the wire from both heating elements. They are both connected to a thermo fuse. When using the self clean feature this fuse protects the oven from over heating and starting a fire. I put a jumper wire from the hot lead on the left and connected it to the 2 leads on the right side. I turned the power back on and turn the oven on to bake at 350 degrees. Yep It worked like a charm. I bypassed the thermal fuse and used the oven, until the new thermal fuse was ordered. If you have any questions about this fix email me at firstname.lastname@example.org Good luck
Posted on Dec 24, 2007
Tips for a great answer:
Feb 06, 2014 | KitchenAid Architect Series KEBC107KSS...
Jan 04, 2011 | KitchenAid Architect Series KEBC107KSS...
Dec 26, 2010 | KitchenAid Architect Series KEBC107KSS...
Mar 22, 2010 | KitchenAid Architect Series KEBC107KSS...
Feb 14, 2009 | KitchenAid Architect Series KEBC107KSS...
Jan 21, 2009 | KitchenAid Architect Series KEBC107KSS...
Dec 22, 2007 | KitchenAid Architect Series KEBC107KSS...
1,994 people viewed this question
Usually answered in minutes!