Question about Alpine CHA-1214 12-Disc CD Changer

1 Answer

Disc error I just had new fuses put in after the changer was down a while. It was playing great and after 1 trip it won't work. The screen in the cabin says disc error with disc 3 as it shuffles through on a system check. I took out the magazine and it seemed ok and re inswerted and it kept shuffling then stops at 3 again. Can anyone please help?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 199 Answers

Hi, does it take the tray out or stop half way?

the alpine changer mechs have a problem with jamming up.
this also covers the mercedes and BMW models too.

if its just tray 3 thats not working then it could be the tray try swapping the tray around this will rule out the mag/cart/tray. that way we can tell if its the changer or the mag/cart.

if its all trays that it dont work on the try tapping the mag with the handle of a screw driver while its trying to load, this is normally enouight to unjam the loading arm..



Mark
Blue ICE

Posted on Feb 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a 12 disc player, played great, added cd's and get code 1E3


I presume you have a fault in your mechanism that is giving the wrong signals to the processor to hang up. Reset the changer if there is a preset present. Further you will need to remove the CD's from the changer and check if any of them are warped or damaged.Do repeat to load one cd and test, if this works then you are encoundering the fault when the changer loads, changing the trays. Look into the tray section for any change in the alignment.Clean off any dirt on the mechanism,look out for any broken flexible cords that moves for the motor drive. Also look out for any motor jamming of the load motor and the drive motor. You will need to look carefully for such faults to remove this error.
I hope this helps. Good day

Jul 07, 2010 | JVC CH-X450 12-Disc CD Changer

1 Answer

I have an Alpine CHM 5655RF 6 disc player. It's


I have an Alpine CHM 5655RF 6 disc player. It's is lit, but will not play. I think the error message is "DO" and now EO-1. If the unit is lit, would that mean that the fuse is not the problem? I would appreciate any and all help. Thanks, CE

Feb 19, 2010 | Alpine CHM-S665RF 6-Disc CD Changer

1 Answer

6-cd changer says error 3 and won't eject CDs


hi i recently bought a lexus ls400 and it the trunk it has a ten disc cd changer by the steering wheel in the car is this little black box that keeps reading E-99 evertime i press play on this odd little box that is the control device to make the cd's play i've put the cd 's in the changer upside down right side up testing it and still the little black cd player play button/disc change button keeps saying E-99 my question is, is it a fuse or is this cd player thing near the stearing wheel just a peiece of garbage please contact me at phantizzle123@yahoo.com if you have any idea why this is doing this because i can't play any cd's theres no cd player where the cd/tape decks usually are in cars in the middle above the column shift. it would mean the world to me if you could help me out with any information as to why this brand new sony ten disc cd changer is giving issues to the cd player thing next to the stearing wheel on the right it's kind of hidden but it just won't stop saying e-99 no matter how brand new a cd i put in the changer thank you your friend john bunce

Aug 14, 2009 | Car CD Changers

1 Answer

My 6 disc changer in my Ford 500 won t Eject or play


well i don't have a 6 cd changer but i have had a few problems like that and all i can tell you is using something to unjam as soon as you hit the eject has been working just fine for me .......hope it helps a bit

Jun 27, 2008 | Car CD Changers

2 Answers

Pioneer Car CD Changer CDX FM673 Error Message


can anyone tell me were to get a installation manaual for a pioneer cd changer (cdx-fm67)

Apr 04, 2008 | Pioneer CDX-FM673 6-Disc CD Changer

1 Answer

CD changer problem


According to the manual, error 11 means the disc is inserted upside down.

Oct 11, 2007 | Pioneer CDX-FM1289 12-Disc CD Changer

1 Answer

Keeps displaying error cdc


you can try to use a cd lens cleaner CD. Put the lens cleaner in slot 1 and load disk 1 the cleaner shouls be dropped in place and begin to clean the cdrom lens.

Sep 18, 2007 | Cherokee Jeep Grand CD Changers - 10-Disc

2 Answers

IT is Pioneer PD-M430 6-Disk CD changer


turn the cd, the silver side must be look down

Sep 16, 2007 | Pioneer PD-M406 6-Disc CD Changer

1 Answer

Kenwood 10 disc changer


i have a sony mini Hi-Fi Component System MHC-GX470. I comes on, the Radio and Tape deck plays well. the CD Player says "mecha Error" and hangs. CAN YOU PLEASE HELP ME???

Jun 23, 2007 | Kenwood KDC-CMP59FM 10-Disc CD Changer

1 Answer

TroubleShooting


hi try pushing reset on the head unit.
otherwise its a trip to your repair agent :(

the 10 disc sonys have a few known problems with error 99


Mark
Blue ICE

Jun 11, 2007 | Sony XR-C5100 CD Changer

Not finding what you are looking for?
Alpine CHA-1214 12-Disc CD Changer Logo

444 people viewed this question

Ask a Question

Usually answered in minutes!

Top Alpine Car CD Changers Experts

Sergey

Level 1 Expert

13 Answers

xxxxxx xxx

Level 3 Expert

4706 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Are you an Alpine Car CD Changer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...