Question about Hitachi 46BX01B 46" Rear Projection Television

1 Answer

Hitachi Ultravision 50" projection Tv

Recently from the top of the TV the screen has a bow shape anything within that bow is out of focus, you see triple of everything and the color is green, blue and red. The bottom half of the screen is in focus. I have had this TV for several years and the question is do I have it fixed or would it be better to invest the money into a new Plasma?

Posted by on

  • kathmance1 Aug 21, 2008

    My picture recently starting to bow at the top in the middle. I start seeing double below the bow and yellow out of focus picture above. There are also a few lines through out. When I access my Magic Focus and can see that the Green and Red lines all match perfectly, but the Blue is bowed badly at the top and wavy towards the bottom. Magic Focus will not fix. Is this also an IC chip problem?

  • porkchop08 Sep 26, 2008

    my t v is 7 yrs old and my screen is bowed at the and the bottom.the picture at the top has as triple effect.I tried to adjust the rays,but that didn't work.When i first turn on t v it is o k then about 5 to 10 mins it go bad again.
    thank you chris r


×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,030 Answers

This is an indication of convergence issues. There are two ic chips that control this and there is a likely hood of there failure and need to be replaced. there possible other issues with ouput resistors and fuses. At my shop the cost to replace these chips are 200 to 350. not a too difficult repair.

Posted on Feb 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hitachi ultravision projection that is turning off


Ur tv projection bulb,been a long time had not been replaced?If the the bulb been,replaced the ballast might be dead.

Apr 14, 2010 | Hitachi UltraVision 55HDS52 Television

1 Answer

Broken screens on 53'' Hitachi rear-projection TV


I think it would likely work if you trimmed it evenly around the sides in order to maintain the central position. Focus may have to be adjusted but thats all.

Oct 25, 2009 | Hitachi 53UDX10B 53" Rear Projection...

2 Answers

Hitachi TV screen adjustment


The easy way to fix this: Click 'Menu' on your remote. Then click 'Setup'. Next, you will have to select 'Screen Position Setup'. This will open a screen that allows you to adjust your TV screen position simply by using the arrow keys on your remote. If your TV is anything like mine, this will work.
(I have a Hitachi 51F710A)

Oct 09, 2008 | Hitachi 50UX57B 50" Rear Projection...

1 Answer

Tv out of focus


Your convergence ICs need to be replaced. Please respond to this same post and verify your model number and I will post the correct ICs for your model and post a link where you can get replacements with free instalation instructions.

Aug 01, 2008 | Hitachi UltraVision CineForm 55VG825 55"...

2 Answers

Many thin black horizontal lines on my Hitachi Ultravision 50" TV


Good Day, LDS also;
You may have a poor seated cable connector. Unplug TV from A/C, remove back look for a large black connector. It connects between the Main Digital Module and the Drive PWB. Re-insert both ends several times to make better contact, use contact cleaner if have but not always needed. Good Luck, big IRISH.

Jul 21, 2008 | Hitachi UltraVision CineForm 55VG825 55"...

2 Answers

Problems with my 50 inch hitachi ultravision projection screen tv


check the solder around the area of the vertical IC. solder is either cracked or else cold. Cold solder appears as dull. Resolder anything that isnt shiny.

May 20, 2008 | Hitachi 53UDX10B 53" Rear Projection...

3 Answers

Hitachi ultravision tv


tv comes on ,i hear but can not see

Dec 27, 2007 | Hitachi 50UX58B 50" Rear Projection...

Not finding what you are looking for?
Hitachi 46BX01B 46" Rear Projection Television Logo

Related Topics:

365 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2270 Answers

The Knight
The Knight

Level 3 Expert

70983 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...