Question about Sony KV-32FS12 32" TV

1 Answer

Tv is not turning on just red light flashing when the on button is pressed

Posted by on

  • 1 more comment 
  • LJ12159 Feb 24, 2008

    I have a toshiba modelTZ55X71 55 inch projection TV that won't turn on the red power light just flashes my TV is my social life HELP!!!!!

  • LJ12159 Feb 24, 2008

    I have a toshiba modelTZ55X71 55 inch projection TV that won't turn on the red power light just flashes my TV is my social life HELP!!!!!

  • Anonymous Sep 24, 2008

    once the tv is goes on it immediatelly goes into standby mode and the standby light flashes.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 20 Answers

The set is in shut down there is nothing an average joe can fix. But if you have any experience check convergence chips and resistors also check for bad PC connections Good luck

Posted on Feb 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Can a symphonic TV model WF203 be put in video mode without a remote


Only if you have a source button on the tv itself. On many of the newer sets you have to have the remote to access your other inputs. Without the remote, nada. And forget universal remotes - they only provide for the most basic functions and video source is not one of them. And you get hosed on original remotes.

Sep 25, 2015 | Symphonic Standard (CRT) Televisions

1 Answer

I have a tv Sony Trinitron XBR. It does not turn on; the LED red light blinks 7 times.


Common problem on those. It has deflection stopped. I.C. on deflection board. Need shop to repair.

Nov 23, 2014 | Sony FD Trinitron WEGA KV-34XBR800 34" TV

1 Answer

What is the Quasar TV code when using a Direct tv REMOTE?


Hello

There is only one four digit remote code for Quasar TV with me. Here it is. You just try. Proceedings are also given. Ok.

[0716]

Proceedings

  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
*******************************************************************************************************************

If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.

Oct 24, 2010 | Quasar SP-3232 32" TV

1 Answer

Setup a one for all remote what is the 4 digit code number for my tv I have a 1997 Zenith


Hello
I've only only one digit code with me. It is "0634". It is the remote code for Zenith HDSAT_420, HDSAT_520, HDSAT_1080. Sometimes this may work with your TV also.

Proceedings

  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
*******************************************************************************************************************


  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.

Oct 23, 2010 | Zenith C27A24T 27" TV

2 Answers

Need remote control code for dish network along with how to instructions. I can't locate my manual for my Zenith


Try this...1) turn on your tv set manually.2) on you dish remote..press and hold the "TV" mode button next to the "SAT" button.when all of the other mode buttons light up, let the "TV" button go...it should be flashing.3) Press the blank power button(The top red button in the top center of the remote).4) press the UP or DOWN button at the rate of about 1 per second until the tv turns off.4) When the tv turns off...press the # key on the bottom right of the remote...this stores the code and you should be ready to go...please try this first..It should work.If the scan doesn't work...The only code for Orion is "694".I hope this was helpful....

Jun 15, 2010 | Zenith C32V37 32" TV

1 Answer

Rca universal remote (rcr3273) no manual- need


I don't know the exact codes but here is the search method. Make sure the device is on. Hold down the tv (or whichever device your trying to program) button and the power button simultaneously until the red light stays on solid. Then press the power button, it will flash one time, and keep pressing slowly letting it flash until the tv turns off. Then press the stop button...and it is programmed. Thanks

Nov 01, 2009 | Standard (CRT) Televisions

1 Answer

Tv wont turn on, red flashing light


FLYBACK & HORIZONAL OUTPUT SHORTED

Apr 11, 2009 | RCA 32V524T TV

1 Answer

Philips universal remote codes


Hi Troysingleto. The code can depend on what model of URC you have. According to a site I found by Googling, the code for Apex TVs on one common URC from Philips is 044. Here are the steps to input it directly:

1. Press and hold the Code Search button until the red indicator stays on. Release the Code Search button.

2. Press and release the desired mode button (TV, DVD, etc). The red indicator blinks, then stays lit.

3. Enter the 3 digit code (044) . Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.

4. With your device on, press CHANNEL Up. If the device responds, no further programming is required. Note: If some buttons do not operate your equipment, try one of the other codes for your brand.


If that code does not work, you can still find the code using this manual procedure first posted on FixYa by cptnkirk4064:

1. Manually turn on device to be controlled.

2. Press and hold the "Code Search" button until the red indicator light stays on, then release it.

3. Press and quickly release the desired code button (TV, VCR, etc). The red indicator light should blink once.

4.Press the "Channel Up" button repeatedly (up to 300 times) until thedevice to be controlled changes channel. The red indicator light shouldblink off with each button press. If you accidentally overshoot therequired code, press the "Channel Down" button to backtrack through thelibrary until the device changes channel. Pressing "Channel Up" changesdirection again.

5. Press and release "Mute" button to install the code.


If you wish to actually identify the code once this has been done, this is the procedure:

1. Press and hold the "Code Search" button until the red indicator stays on. Release the "Code Search" button.

2. Press and release the desired mode button (TV, VCR, etc.). The red indicator light blinks and then stays on.

3. Press and release the "Code Search" button. The red indicator light goes off.

4.To find the first digit for the code stored under the mode key pressedin "Step 2" press each numeric key from 1-9 in turn. When the redindicator light blinks off, the number you pressed is the first digitfor the code you are searching for.

5. To find the second digit,repeat "Step 4," this time when the red indicator light blinks off,this is the second digit in your number.

6. Repeat again for the third digit in your code number.



Once I find out the code for my TV or DVD player, I write it on a small piece of paper (make sure to note which unit code is for!) and tape it to the inside of the lid to the battery compartment for future reference.

Best of luck!

Feb 13, 2009 | Apex Digital AT2002S 20" TV

2 Answers

TV doesn't turn on, red light flashing


numder of flasing indicate error code . so i need how many flash you can see when power on the tv using front power butten then i will suggest the solution

Jan 15, 2009 | Sony KV-32S45 32" TV

2 Answers

Sky remote tune to samsung


1. Press tv on your Sky remote control.

2. Press and hold down select and the red button together until the red light at the top of your Sky remote control flashes twice.

3. Press tv again

Then enter the remote control code using the number keypad. The red light will flash twice if a valid code has been entered.

Samsung Code: 0060

4. Point your Sky remote control at your TV and press the Power button. If this turns the off as you'd expect, then the tv should be set, press Select and the remote should work

5. If the TV does not turn off press tv, then press the Power button again, repeat this process until the TV turns off, when the TV turns off press Select.

Aug 13, 2008 | Samsung WS32Z308P 32" TV

Not finding what you are looking for?
Sony KV-32FS12 32" TV Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68157 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Are you a Sony Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...