Question about Olympus Stylus 730 Digital Camera

1 Answer

Cant get onto the menu screen

Hi,

When i start up my camera i cant get onto the menu screen with all the options.
When i press menu i get the startup screen with the date, time etc. I press ok it disapears. But when i press menu again it goes back to the time, date setting screen.
It was working fine before, just started doing this.
Can anyone help me?

Cheers

Jamie

Posted by on

  • 5 more comments 
  • catterkeith Jun 22, 2008

    I have the same exact promblem

  • Jeffroski Aug 17, 2008

    I have the same issue. I tried the reset button...but no luck. I checked Olympus' website for troubleshooting ideas but none of them address this issue. Has anybody tried calling the manufacturer?

  • Anonymous Nov 06, 2008

    I'm having the same problem. I think it's a setting that had to be accidently pushed. My 2 year old is constantly getting a hold of my camera. I can tell by the lack of answers that it's not easy to fix? By reading the rest, I think I need a different camera.

  • emdon Dec 04, 2008

    I have the same exact problem! I went to the camera store where i bought it from but they couldn't help me out..

    Has anyone found any solutions?

  • sonica7 Dec 09, 2008

    I have the same problem too! I can't seem to format the card or ANYTHING. I can't get to the settings... NOTHING. Just time and date. VERY ANNOYING. I too, think some sort of setting was accidentally pressed. Because now i even have big yellow numbers telling me how many photos I have left (which weren't there before this problem started).

    STILL no one knows anything?


  • Anonymous Mar 13, 2009

    Same here. Sounds like a glitch with the camera.

  • juliaguulia May 06, 2009

    I have exactly the same problem, other people were using my camera and now I can't get to anything on the menu!  Can't even use the video camera anymore!  Has anybody found a solution?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I finally figured it out!!! There is a button on the right-hand side of the camera, which switches it from normal mode to simple mode. Just press the button and everything goes back to the way it was...

Posted on May 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I would like to turn the date stamp off... I do not like it in the pictures


Using the Capture Menu
The Capture Menu allows you to adjust camera settings that affect the characteristics
of the images and video clips you capture.
1. While in Live View or Playback, press , then use to highlight .
2. Use to highlight a menu option, then press to display the menu option's
sub-menu.
3. Use to highlight a setting, then press .
4. Press to exit the Capture Menu.
For on-camera information about an option, use to highlight Help... in the option's
sub-menu, then press .

In the capture menu goto

Date & Time Imprint Imprints date in lower left corner of image.
Off Default No date or time imprinted on the image. (this setting)
Date Only Date permanently imprinted.
Date & Time Date and time permanently imprinted.

this should fix your problem

Mar 18, 2014 | HP Photosmart M525 Digital Camera

1 Answer

How do I change the date and time on a vivcam8225


Hello and welcome to FixYa!
This following steps allows you to set the system time which will be displayed on the photos.
  • Press the Up or Down buttons to select the Date option in the Setup menu.
  • Press the OK MENU button.
  • Press the Up or Down buttons to select a Date option from the menu that appears
angel_bird_18.jpg
On selecting "On" the date will appear on the photo once it is taken.
On selecting "Off" no date will appear on the photo.
On selecting "Set Date" the Set Date settings screen will appear. You will be able to change the date settings that will appear on the photo once it is taken.
To Set the date:
  • Press the Up or Down button to enter the Set Date option.
  • Press the OK MENU button.
  • Press the Right/Left button to select and highlight the Year, Month, Day, Hour, Minute, Second and Date Format type.
  • Press the Up or Down button to set the Date and Time digits.
  • Select the first option of the Date format and press the Up or Down button to set the date format that appears on the top line: YY MM DD; DD MM YY; MM DD YY.
angel_bird_19.jpg
  • Press the OK MENU button to confirm, save the changes and exit.
You have done it.
I hope this solution helps you
If you have any more query or issue regarding your problem do inform me.

Thank you for using FixYa!

May 16, 2011 | Vivitar Vivicam 8225 Digital Camera

1 Answer

Trying to set date/time for the first [ what is the wrench button?]


The "wrench" is NOT a button, it is an icon in the menu.

Press the MENU button. Press the Right/Left button to select the "WRENCH" icon The Setup menu appears in the center of the LCD. 3. Press the Up/Down buttons to select the Date option in the Setup menu. Press the MENU button. Press the Up/Down buttons to select a Date option from the Menu that appears: On selecting "On" the date will appear on the photo once it is taken. • On selecting "Off" no date will appear on the photo. • On selecting "Set Date" the Set Date settings screen will appear. You will be able to • change the date settings that will appear on the photo once it is taken. To Set the date: Press the Up/Down button to enter Set date option. 1. Press the MENU button. 2. Press the Right/Left button to select and highlight the Year, Month, Day, Hour, Minute, 3. Second and Date Format type. Press the Up/Down button to set the Date, time and format

May 07, 2011 | Vivitar ViviCam X327 Digital Camera

1 Answer

Please...which is the wrench button? vivitar x327 trying to set up date/time. for the 1st time


The "wrench" is NOT a button, it is an icon in the menu.

Press the MENU button. Press the Right/Left button to select the "WRENCH" icon The Setup menu appears in the center of the LCD. 3. Press the Up/Down buttons to select the Date option in the Setup menu. Press the MENU button. Press the Up/Down buttons to select a Date option from the Menu that appears: On selecting "On" the date will appear on the photo once it is taken. • On selecting "Off" no date will appear on the photo. • On selecting "Set Date" the Set Date settings screen will appear. You will be able to • change the date settings that will appear on the photo once it is taken. To Set the date: Press the Up/Down button to enter Set date option. 1. Press the MENU button. 2. Press the Right/Left button to select and highlight the Year, Month, Day, Hour, Minute, 3. Second and Date Format type. Press the Up/Down button to set the Date, time and

May 07, 2011 | Vivitar ViviCam X327 Digital Camera

2 Answers

How to remove date stamp from screen?


In the lower left corner of the back of the camera just to the right of the LCD screen is a button marked "disp" by pressing the button it will change the different screen modes on should show only the picture without the numbers or writing on it.

Dec 26, 2010 | Canon PowerShot SX20 IS Digital Camera

2 Answers

How do I select to have the time and date on the photos I take. The option for this is not highlighted when I open the menu. Don't know why...


The date stamp will only work when the camera's resolution is set to postcard mode. Press Func/set, scroll down to the bottom, then across to the icon with the clock and mountain. It will say "postcard". Press Func/set again. Then press Menu, scroll down to "Date stamp" and across to select date or date and time, then press menu again

Dec 13, 2010 | Canon PowerShot A720 IS Digital Camera

1 Answer

Locks onto Favorites screen at start


Please also try to upload new firmware:


Connect the camera with the computer.
Turn the camera on.

Click onto the link and follow the instructions.
http://www.kodak.com/global/mul/service/downloads/DownloadLookup.jhtml?pq-path=7546/7548&product=EKN030485

Feb 07, 2010 | Kodak EasyShare One Digital Camera

1 Answer

Change the date


-Turn On camera
-Press menu button to show an options screen
-Go to setup menu or a Icon of a Wrench thats the setup
-Under setup Press down arrow 12 times to show he date and time
-Press Ok buttton again if you already on the date and time to adjust the date setting and time

-Gudluck!

Nov 06, 2009 | Kodak Z8612 Digital Camera

1 Answer

Date display in photos in IXUS40


here is the solution:
The date and time can be included on the pictures taken only with the camera in postcard mode. You must also activate the date stamp option in the menu.
To set the camera into postcard mode, press the [Func.] button on the camera, then use the [arrow down] key to go down to the last option in the menu, and there you can choose the [Postcard mode]. Press [Func.] again to exit the function menu.
dsc_include_date01_tcm14-520510.jpg
To set the date and time stamp, press the [Menu] button and then use the [arrow down] button to go to the [Date stamp] option in the menu. You can set this to "Date" or "Date & Time". Press the [Menu] button again to exit the menu.
dsc_include_date02_tcm14-520511.jpg
your date and time are set now
congratulations!
Rate this answer if it is working with you
thank you
with all my best regards
huetrichard@gmail.com

May 09, 2009 | Canon PowerShot SD300 / IXUS 40 Digital...

2 Answers

Canon sd 750 how to put the date in the picture?


here is the solution:
The date and time can be included on the pictures taken only with the camera in postcard mode. You must also activate the date stamp option in the menu.
To set the camera into postcard mode, press the [Func.] button on the camera, then use the [arrow down] key to go down to the last option in the menu, and there you can choose the [Postcard mode]. Press [Func.] again to exit the function menu.
dsc_include_date01_tcm14-520510.jpg
To set the date and time stamp, press the [Menu] button and then use the [arrow down] button to go to the [Date stamp] option in the menu. You can set this to "Date" or "Date & Time". Press the [Menu] button again to exit the menu.
dsc_include_date02_tcm14-520511.jpgyour date and time are set now
congratulations!
Rate this answer if it is working with you
thank you
with all my best regards
huetrichard@gmail.com

Feb 25, 2009 | Canon PowerShot SD750 / IXUS 75 Digital...

Not finding what you are looking for?
Olympus Stylus 730 Digital Camera Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Olympus Cameras Experts

kakima

Level 3 Expert

100405 Answers

Willem.
Willem.

Level 2 Expert

354 Answers

Steven Wander
Steven Wander

Level 3 Expert

579 Answers

Are you an Olympus Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...