Question about LG WM-2277HW Front Load Washer
Usey only takes about 2 tbs soap ather than that bad main board make sure you have cold water going in washer
Posted on Feb 25, 2008
SOURCE: spinning cycle
Keeping in mind that the soap & bleach gets dispensed into your wash on the
second to last rinse cycle and that most all rinse cycles are in cold
water. Is your cold water valve screen plugged causing your washer to
rinse poorly? Are you using the HE detergent? If not maybe the
washer is sudsing up to much and having a hard time rinsing all the
suds and bleach out and leaving the clothes soapy.
Fill the washer up with no clothes in it on a cold/cold wash setting does it take a long time to fill the washer up? Also when it is full and agitating is there suds in the washer?
Last suggestion is if the drain is hose is a lot higher than the top of the washer it might have a hard time draining out all of the soap water before the next load
Posted on Mar 23, 2008
Tips for a great answer:
Sep 11, 2015 | LG Washing Machines
Mar 23, 2008 | LG WM-2277HW Front Load Washer
Apr 10, 2014 | LG WM-2277HW Front Load Washer
May 16, 2010 | LG TROMM WM2688H 4.0 cu.ft. Front Loading...
Nov 15, 2009 | Washing Machines
Aug 16, 2009 | LG Washing Machines
Sep 21, 2008 | LG TROMM WM2688H 4.0 cu.ft. Front Loading...
748 people viewed this question
Usually answered in minutes!