Question about Umax Astra 2000P Flatbed Scanner

1 Answer

Power cable missing

I need to find a power cable for my scanner--where?
Kwat82@charter.net

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 121 Answers

Your best bet would be to try ebay or contact Umax Directly.

Here is a link to their website:

http://umax.com/index.jsp?worldwide=usa

Good luck. If you found this solution helpful please rate this.

Thanks - Tech101

Posted on Jun 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an Epson V500 scanner with attached EU-73 document feeder. The ADF option is now missing from the source list. Can someone assist me?


Recommend reloading the software and drivers to make sure they are up to date. Latest versions are available here: http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=88368&infoType=Downloads

Mar 09, 2015 | Epson Office Equipment & Supplies

1 Answer

I have 2 Epson V500 Scanners, 1 of them I just have on standby. The one I use daily does not turn on. I tried using the cables of the standby unit already. I checked the fuses on the plugs of both...


  1. Check that the power socket switch is on Make sure your scanner's power cord is securely connected to the scanner and a working electrical outlet.
  2. If your scanner is supplied with a power adapter, make sure your scanner's AC adapter is securely connected to the scanner and a working electrical outlet.
  3. Make sure that the power outlet works. (If necessary, test it by plugging in another electrical device and turning it on.)
  4. Check that the power switch is on at the mains socket. If this is on, carefully check the power cable to ensure it is not damaged and remove then reseat it before attempting to turn the scanner on again. If your scanner has a power button, make sure that the button is depressed so it is turned on. Also, make sure that your outlet works and is not controlled by a wall switch or timer.
  5. Power off the scanner at the mains socket. Unplug the power cable from the socket, then remove and reseat the power cable from the scanner's power cable port. Plug the scanner back in at the mains and ensure the socket is switched on.
  6. If your scanner has a power button, does the power button depress when pressed? Press down firmly on the power button, if it is stiff and does not depress then there may be a problem with the button.

  7. Connect the scanner directly to the mains - not via a surge protector or extension lead. If your unit is connected via a surge protector or a power strip/extension lead, connect the unit directly to the mains socket.
  8. Try another suitable power cable. Check that other electronic devices connected to same power socket have power and try another mains socket and another power cable if necessary. Failing this try another suitable and known-working power cable. Depending on your scanner, a standard "kettle lead" or "figure of eight" power cable is used. If there is power to the scanner (indicated by an illuminated Start light), when a different power cable is used, then the fault is with the original power cable.


If the unit does not power on after following the checks above, contact Epson for support. If your scanner uses an AC adapter, then this may need to be replaced. If your scanner is over 12 months old, you can purchase a replacement AC adapter directly from Epson.

Nov 13, 2010 | Epson Perfection V500 Flatbed Scanner

1 Answer

Its broken


Be sure you have installed all the drivers and softwared needed. Power the scanner off, then download and install the following from this website: http://panasonic.net/pcc/support/scanner/download.html
  • STI device driver
  • TWAIN driver
  • ISIS driver
  • User Utility
After all have been installed, reboot your computer. Once booted, power on your scanner and allow Windows to locate and finish installing the drivers.

Jul 21, 2009 | Panasonic KV-S3065CL Path-Through Scanner

1 Answer

Need power supply for UMAX Astra e5420 acanner


From a quick search I found this power supply, from Umax.com,
http://umax.com/scanners/index.jsp?cate=Scanners%3A+Accessories&skunum=68300055-0000

Jun 03, 2009 | Umax Astra 3450 Flatbed Scanner

2 Answers

Epson V100 flatbed scanner power cord


There's a shop in the UK or Sweden called Clas Olsen that sell a range of multi headed adapters, you have a pack that has the usual ones you see and they have a pack for other adapter heads and one of them fits the V100. How do i know? Cos I bought one for my scanner but it will set you back by £25.

Feb 28, 2009 | Epson Perfection V100 Flatbed Scanner

1 Answer

Power input


12 watts.

If you want to know more of the specifications in this flatbed scanner visit this link.

http://www.umax.com/support/knowledge/specifications.jsp?model=Astra+2000P



Jan 09, 2009 | Umax Astra 2000P Flatbed Scanner

1 Answer

Need help to hook up IBM color flatbed scanner


Attach one end of a parallel port cable to the parallel (printer) port on your computer and the other end of the cable to the computer port on the rear of the scanner. If you have a printer connected to your computer, you must disconnect the printer cable from the computer before connecting the scanner cable.
If you have trouble attaching a cable connector to a port, be sure that you are connecting the correct end of the cable to the correct port.
IF. . . you want to use a printer WITH your scanner, attach one end of the printer cable to the printer port on the rear of the scanner and attach the other end of the cable to the printer.
Plug in power cord and then power up PC.
Power on scanner. Install drivers. Restart PC to activate EZ Station buttons.

Oct 11, 2008 | IBM Color Scanner Flatbed Scanner

2 Answers

Power supply for a 5500C


Delta Electronics
AC Adapter model ADP-36XB REV. B
Input:AC 100V-120V~850mA 50/60Hz
Output: 24V 1500mA LPS (Center positive)
Made in Thailand

Jul 02, 2008 | HP Scanjet 5500c Flatbed Scanner

Not finding what you are looking for?
Umax Astra 2000P Flatbed Scanner Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Umax Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

4804 Answers

Mohan Sriraman
Mohan Sriraman

Level 2 Expert

490 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18331 Answers

Are you an Umax Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...