Question about Philips TV Tuner Video Capture PCI Card - Phillips Digital (652101138177)

2 Answers

TV channels We are unable to get any channels on our tv. It worked at one time but now doesn't. We have tried to reprogram the channels. It goes through each channel and looks like it has been reprogramed but does not. The channel numbers on the tv are red now instead of the usual yellow. Any suggestions? The dvd player works as well as other tvs hooked into that particular cable.

Posted by on

  • j s May 08, 2008

    I have no sound or picture from channels, dvd vcr or antenna

  • Anonymous Jul 19, 2008

    can only get abut four channels. Cannot tune any other channells.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I bought tv from hotel chanel not available

Posted on Jun 22, 2013

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,596 Answers

If cable is hooked through cable box with a coaxial cable, then turn tv to ch 3 or ch 4 as appropriate.

If cable is hooked through any other type of cord (red/green/blue or red/white/yellow) use the AV+ or Source button to change your source to Av1, AV2, HDMI, or however you have the cable box hooked to TV (I am assuming your TV is a Philips).

Posted on Mar 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I reprogram magnavox TB110MW9 DTV converter?


Go to the setup mode using the remote, connect it to a good antenna and rescan the channels make sure its output is connected to your TV and tune TV to channel 3 exit the menu and you should be good to go

Dec 17, 2014 | Magnavox TB110MW9 DTV Digital to Analog...

2 Answers

I have a problem with my thompson tv i can not turn my tv on or off with my romote or my fingers


Did you try unplugging and replugging the set to reset? Checking remote battery? Actuating each remote function (button by button) twice in succession to reprogram? Also, could you have inadvertently de-programmed by pushing the PROG or similar button? Mfrs not uncommonly but that button in the wrong place where users, especially button mashers, are apt to push them trying to turn of the set. The suggestions above might reprogram. Other wise contact customer service for the TV and let them guide you.

Nov 03, 2014 | Televison & Video

1 Answer

Emersin tv


which Dish Network system do u have. If it is the Hopper they program a little easier that the others. but if you have anything other than the hopper u do this. #1 turn onTV,#1 take Dish Remote,#3 press and hold down the TV button on top of the remote, hold it till all four lights light up.#4 press the small red TV button,# now press and click the channel Up or Down , do this one click at a time , (do not just press and hold ) this may take 200 clicks so don't give up. #5 when the TV goes off u quickly press the #(pound button) located on the bottom right of the remote. the TV button on top should flash 3 times. Now try to turn the TV back on.Ok now if you are clicking the channel button too fast and the TV turns off and u pass it up no sweat,,just hit the # button anyway.. and start from the beginning again, but this time use the OTHER channel button the TV should turn off within a couple of clicks. (that saves you from having to hit the button another 100 tries.. ha good luck

Sep 29, 2014 | Televison & Video

1 Answer

Why is my Tv flash black and white and the quality goes bad while using my ps3 while its hooked up to my Capture device?


That is usually caused from the capture device putting out a cross channel that you set is picking up. If the device has a modulator and plays through a CHANNEL as opposed to a connection, check the channel to be sure that it is the right one.

Jun 09, 2014 | Diamond Multimedia Diamond USB 2.0 GC500...

1 Answer

All of a sudden we can't pick up not one channel


Perhaps your tuner is bad. Have you tried reprogramming after you bought new antenna?

Feb 25, 2013 | Channel Master 3020 Large UHFVHF Antenna

1 Answer

I HAVE CONNECTED THE TUNER TO PCI SLOT~ INSTALLED DRIVER & TVR2.5 SW ~ IT HAS SCANNED THE CHANNELS & TOTAL 65 CHANNELS ARE LISTED~ UNABLE TO GET ANY PICTURE & SOUND IRRESPECTIVE OF WHICHEVER...


Hello, I suppose you used the factory software suite. For my Pinnacle card it didn't work. Besides the obvious remove/uninstall reboot and try again method I recommend you try a third party application such as Honestech TV Plus Gold. It has a free trial so it is a good way to check whether it is a software problem or other installation issue.

Good luck!

Aug 08, 2011 | Philips SAA7130 TV Tuner/FM Radio/Video...

1 Answer

My remote quit working for my tv. I can change the channels but cannot control the volume or power on the tv


It likely needs to be re-programmed, or the batteries need to be replaced. If the batteries have been replaced and it's still not working, then try reprogramming it:

This depends on whether or not you have a universal remote control, or just a standard one that came with your television. For this, you will need to goto RCA's website:

http://www.rcaaudiovideo.com/
Type in your Model # into the search bar, located on the back of the unit. This will take you to a support page where you should be able to find some information on reprogramming the remote specific to your unit. If you can't find it, I would suggest calling RCA's technical support.

Dec 26, 2010 | RCA (DTA800B1) Video Converter

1 Answer

My Magnavox tb110mw9a converter loses programming randomly.


Badge #7067 is giving you a load of bunk. I have had one for 8 months and the only time I have reprogrammed it was when all TV was to go digital. Even when our power goes out the converter remains programmed.

I would keep calling back. Chances of getting the same guy is slim. Insist on a replacement.

You can also go online at http://www.funai-corp.com

Wayne

Sep 04, 2009 | RCA Analog (RCA) to Digital (VGA)...

2 Answers

FRONTECH TV TUNER MODL JIL-0606 CODE 10 DOESNOT START


How to configure Remote control in my TV tuner card Model No. JIL - 0606

Jun 16, 2009 | Philips SAA7130 TV Tuner/FM Radio/Video...

1 Answer

Media Center can't find digital TV channels for TV Wonder HD 600


Just to make sure, you do have analog tuners setup right?  Media Center 2005 requires analog tuners be working before digital tuners are allowed.

Oct 11, 2008 | ATI TV Wonder HD 600 PCI PC TV Tuner...

Not finding what you are looking for?
Televison & Video Logo

166 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69654 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...