Question about Frigidaire FEX831CS Top Load Stacked Washer/Dryer

1 Answer

Won't go through cycles

Once the washer fills with water it won't go to the next stage of washing. It spin and release the water BUT just won't wash clothes What could be the problem the switch?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 750 Answers

Hello quarta,
Happy to be of assistance,


You said, Once the washer fills with water it won't go to the next stage of washing. It spin and release the water BUT just won't wash clothes What could be the problem the switch?

Yes, You have a bad switch or electronic problem that needs hands on service!

How old is the appliance?
If the appliance is 10 years old or more you may not be advisable to put good money into bad! New appliances are so much more efficient today that they can save you a lot of money in energy!!!!
You need a hands on tech for this repair!


You will be fine
Bless You huuum
PLEASE GIVE ME A GOOD RATING BEFORE YOU SIGN OFF

Posted on Sep 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hi my machine will fill with water then doesn't do anything for the whole wash cycle then will dran and spin but will not wash in the wash cycle


Hi, it could be your heater element is not kicking in and so its not heating up the water and not moving on to the next stage of washing. Best get the unit checked out.

May 03, 2016 | Washing Machines

1 Answer

Beko WMP652W washing machine will start cycle but get stuck at end of wash, doesnt go onto rinse or spin any help please?


see the next steps and use the common sense: God bless you
When the cycle doesn't advance, it's probably the timer or a cold-water supply problem: It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer. It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.
8_2_2012_12_47_51_pm.gif

Aug 01, 2012 | Washing Machines

1 Answer

The washer fills agitate but won't spin & drain


Possible fault with the program controller unit. You need to check the program cycle outputs using a multimeter connected to measure the output voltage. On start the inlet should open and then close as the water level sensors works and then proceed to wash. So this much seems OK. Now in the next step the drain valve must open to drain off, then fill once again with the inlet working and water level being sensed. If there is no output in this section cycle then the prrogram controller has errors within the memory . You can remove the panel and reset all connectors and connections.

Oct 30, 2011 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Won't drain or spin


Hi jm irons - most washer will not spin as long as the water remains inside, first thing is to check why the drain pump has not operated, water levels are controlled by the pressure switch or laymans term water level control, when water drains it closes a built in switch and enables the spin cycle circuit and machine advances to next stage of program.

Jun 18, 2011 | Washing Machines

1 Answer

I have a top loading Kenmore Washing Machine. I don´t have the excat model but looks like a KENMORE HEAVY DUTY SERIES 70 AUTOMATIC WASHER, MODEL # 110.92273100. The problem presents after finishing...


You may have 2 defective parts.
First,make sure the hot and cold water hoses are connected correctly and both turned on.
If the water fill problem is the same,the water temp switch is bad.
The not filling after the wash cycle could be a bad lid switch.
Set the machine for SPIN and turn it on.
If it does not spin,replace the lid switch.

Sep 20, 2010 | Kenmore 24042 Top Load Washer

1 Answer

The washer will not drain or spin


more than likely the pump needs replacing, first of all remove the outlet drain hose from the the place it discharges and lower it into a bucket,this should allow it to syphon away,you may need to empyt the bucket a few times once the machine is empty you should be able to put it on its spin cycle once it has spun locate and remove the filter to remove any objects or lint, fill machine with warm water and try to drain and spin via the programme,if this do not work fit a new pump

May 29, 2009 | Kenmore Washing Machines

2 Answers

Washer will fill fill with water but doesn't start wash cycle


it will fill but won,t spin, will throw out water as if it washed, then it take water to rinse but won,t spin ,then will throw out water as if it did , but clothes are soaked

Feb 21, 2009 | Roper RAS8445KQ Top Load Washer

1 Answer

Will not move to the next cycle.


  • It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.

  • It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.
  • Jan 07, 2009 | Kenmore 24032\24036 Top Load Washer

    Not finding what you are looking for?
    Frigidaire FEX831CS Top Load Stacked Washer/Dryer Logo

    Related Topics:

    88 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Frigidaire Washing Machines Experts

    Electrolux
    Electrolux

    Level 3 Expert

    4342 Answers

    Richard Roth
    Richard Roth

    Level 3 Expert

    9472 Answers

    Dan Webster
    Dan Webster

    Level 3 Expert

    8205 Answers

    Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...