Question about Yamaha HTR-5830 Receiver

1 Answer

No Audio thru Optical input

We just changed over to a new television provider - ATT UVerse and hooked up the "cable box" to the receiver with Optical cable but cannot get sound.

Posted by on

  • jrlee01 Mar 23, 2008

    I have the same problem. I've got a HD PVR & PS3 hooked to my LG TV via HDMI. I connect the TV to my HDR-5830 receiver via digital optical cable. I have been unable to get any audio from my receiver from either the PS3 (BluRay DVDs) or from my PVR (HD channels). My HDR-5830 indicates that it detects PCM on the DTV/CBL optical input but no sound is output to my 5.1 speakers. I have performed a test on the speakers and everything checks out.

    I'm at a loss. Any suggestions would be most welcome. I'm at the point when I believe there is a problem with my HDR-5830 receiver.


×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If its a PS3 please realize that you adjust the sound options using the sound option menu on the ps3, so its possible that you have the PS3 set to RCA cable and not the HDMI therefore the optical cable isnt getting any sound from the TV

Posted on Feb 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Denon AVR 1609 7.1 Channel Receiver turns on but i get no sound thru the optical to the tv. what could be wrong?


If you have your video equiptment hooked to your reciever input, then, out to TV, This isn't the best way to go. Of course it depends on what you have for input and output on your TV but, the ideal way to hook your system would be to hook all video equiptment to TV, ie:, cable/sat box, DVD player, etc., to TV via, HDMI, Composite, RCA, etc., then run your digital optical out from TV to reciever. You would use the TV's menu to choose what you watch and would only have one input(audio) to reciever. Some recievers are set up to transfer video, but, it uses more cables, creates more connections, and more room for error.

Jun 13, 2011 | Denon Audio & Video Receivers

1 Answer

Xbox elite connected to TV thru HDMI works fine, but connected via bcs-fs500 receiver = no audio or video Cable tv through receiver works fine Have tried cable tv through receiver inputs HDMI 1 and 2...


Hook your Xbox to tv via HDMI, then hook TV to reciever through digital optical or composite cables. If you try to get your picture through receiver first, you may get picture and sound but, sound may be delayed and picture might not be the best. Bettter to run through tv first then provide sound to receiver.

Mar 31, 2011 | Pioneer Audio & Video Receivers

1 Answer

I need the remote code for a pioneer vsx502 receiver for att uverse remote


I used 5120 to turn off and on the receiver on the Aux button, I am also control the volume on the recevied by assigning the volume control using 955 code. The one thing I lack is a way to change the receiver input between BD, HDMI1, HDMI2, etc. I still have to go to the Receiver remote for that. I know the Uverse Receiver can't do everything, but if I could just get the input to change on the UVerse Remote, it would be awesome. I'm trying to avoid getting a Harmony. The blu-ray and tv also work, which is great! See this reference for the silver remote:
http://www.att.com/support_media/images/pdf/uverse/remote_control_user_guide.pdf
If you have black, you may need to visit the AT&T support site to get the black manual.

Nov 17, 2010 | Pioneer VSX-607 Receiver

3 Answers

Att uverse receiver hooked up to sharp aquos tv, remote quits


first try new batteries and be sure you have pressed the AT&T mode button at the top left of the remote - if you still have issues then on the sharp tv menu - turn off any energy saver mode, Optical Picture Control, taking the picture mode from dynamic or vivid to standard, and if that doesn't work - try changing the backlight settings if your tv has one.

Aug 23, 2009 | Denon AVR-1908

1 Answer

I have a 50 incch samsung tv with samsung surrond sound/receiver/dvd player. I have no voices when we play a dvd but the music plays what is wrong


You need to have the audio from the DVD player hooked up to the same input path on the receiver.(if your running video thru the receiver) DVD audio should be hooked up to either an analog input (RCA cables) or Digital input like Digital Coaxial or Optical. Next to where you are plugging in these cables will be writing like "DVD optical" or "DVD digital". Then, make sure you switch the input of the receiver to "DVD" then it should work fine. If you still have problems post a comment and I will help some more. Hope this helps

Jun 14, 2009 | Audio & Video Receivers

1 Answer

Intermittant Audio with Yamaha RX-V465 only from cable box


I have the same receiver... You can try pressing the Option button and choosing Signal Info to see what audio signal the receiver sees and if that changes over time. Maybe the cable box is not outputting according to specifications... TV can live with that, but receiver maybe can't.
You can also try to connect the cable box via SPDIF cable (optical or coax) to see if it helps or not.

Jun 05, 2009 | Yamaha RX-V463 Receiver

1 Answer

Kenwood vr-405 receiver


I have the 405 as well. My TV has an optical out and I run that straight to the 405 optical input. I set the input selector to DVD/CD (not DVD)and presto! TV audio out my speakers. It all comes down to the audio connections on your TV.

Mar 23, 2009 | Kenwood VR-405 Receiver

1 Answer

Denon AVR 2800 digital hookup to PS3


If your TV has an HDMI input, hook up the PS3 w/an HDMI cable to the TV. This will give you a high def picture (set up the PS3 to output the max resolution your TV displays). That will take care of the video side.

Next hook up an optical cable from the PS3 to the receiver. In the PS3 menu, you have to change the audio settings to output the sound via the optical cable.

Finally to get sound out of the receiver to the speakers, you have to setup the receiver source input. For example if you setup the PS3 to play thru "VCR" input, then you have to make sure the VCR input is setup to use either optical 1 or optical 2 for sound (whichever one you have the optical cable plugged in from the PS3).
  • I found this solution on a different site... it worked for me. I needed to change the sound settings in my ps3 to optical... then i selected dolby 5.1.... that took care of my sound.

Dec 12, 2008 | Denon AVR-2800 Receiver

1 Answer

Problem hooking up my Yamaha RX-V461 to my PS3


When you connect the optical cable to the ps3 you must change the output to optical on the ps3. To do this, startup your ps3 then go to settings then audio output settings and change it to Digital Out (Optical).

Dec 01, 2008 | Yamaha RX-V461 AV Receiver

1 Answer

Denon avr-1909 crackling sound while watching Uverse HD.


It may may the the AT+T box is really not compatible with the AVR or the Pioneer.

Check the specs on those input/outputs for the Ubox and the receiver.
See if they agree. If so, try another hookup method like HDMI ( which carries the audio too)

Nov 05, 2008 | Denon AVR-1905 Receiver

Not finding what you are looking for?
Yamaha HTR-5830 Receiver Logo

453 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Audio & Video Receivers Experts

Larry Stiles
Larry Stiles

Level 2 Expert

286 Answers

jonpoint

Level 1 Expert

4 Answers

Are you a Yamaha Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...