Question about Mag Innovision LT776s 17" LCD Monitor

2 Answers

Fujitsu-Siemens Monitor problem

When using my fujitsu-siemens amilo notebook, the monitor suddenly shuts down. It's not all black as you can sense a little backligt. However, only way to wake up the monitor/computer again is by shutting it all down using the power on/off button and turning it on again (which of course results in a message that windows was not shut down properly). The problem both occurs when using a programme and when no programmes are running (except for Vista). Any ideas what the problem may be?.

Posted by on

  • 1 more comment 
  • Anonymous Feb 25, 2008

    hi my name is osama frome egypt

    my problem is i connect the monitor power frome power supply (12 volt)directly then whene use after 1hore i sae meny verticully lines - then monitor go white colore for few second and backe normaly



    I AM SORRY FORE MY WRITE

  • pamelamoses1 Sep 20, 2008

    My monitor shuts down and but there is still light on the screen. The mouse light goes of at that time as well, but the fans shuts of in the cpu while the light remains on.I have to shut down the computer and when I turn it back on it asks to repair itself because it was not shut down properly. after the repair process, the monitor shuts down again after a few minutes.

  • bwil-gers Jan 16, 2009

    my monitor suddenly turns off, when i play the game timeshift

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Asalam o ahlikom.
i m student for DAE (electrincs) request give me next education (admission) guid line my future. plz

Posted on Jan 15, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

MY LCD SIEMENS 15
I CONNET IT FROME POWER SPPLY (12 .V) IT WORKE BUT AFTER FEW MIANETS MONITOR ECIME WHIGHT WITH GROWPE LINES RED AND GOOWPE LINES BLUE COMEING AND GO QUKLY

Posted on Feb 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fujitsu siemens scenicview b19-3


hi you must disable the main screen in properties section of the display panel then when you start up the computer the screen will not activate until windows has loaded and found and installed the screen drivers after that all should be good to go if you need any further help don't hesitate to contact me :)

Feb 07, 2013 | Fujitsu Siemens Premium Line P19-1 19" LCD...

1 Answer

Driver Amilo L3190t


What is the trouble with it, what can you not achieve, unless someone knows something about the problem, they are not going to know what help to suggest.

Aug 27, 2012 | Fujitsu Siemens Monitor Lcd 19in Amilo...

2 Answers

Fujitsu Siemens Premium Line P17-1 17" LCD Monitor. When the monitor is turned on, you can see the Fujitsu Siemens logo for half a second, then the screen goes black. (LED stays on) The monitor...


Monitor ia having a problem with Voltage filtration... Replace the electrolitic capacitors at secondary side of power board, There are 2 voltages, 12 V and 5V...each of them has few electrolitic capacitors in line, replace them, watch the polarity and all works...Cause of eletrolitic capacitors on secondary side may be the one little capacitor in the primary side, becarefull there is some high voltage out there

Dec 11, 2010 | Fujitsu Siemens Siemens Premium Line P17-1...

1 Answer

Fujitsu Siemens Premium Line P17-1 17" LCD Monitor. When the monitor is turned on, you can see the Fujitsu Siemens logo for half a second, then the screen goes black. (LED stays on) The monitor does...


Try connecting each monitor to a different desktop/laptop computer, to rule-out the possibility that the video-card on your own computer is the cause of the problem.

Sep 29, 2010 | Fujitsu Siemens Premium Line P19-1 19" LCD...

1 Answer

Fujitsu Siemens 19 W LCD monitor: no image


Temporarily connect a different monitor to your computer, to see if your video-card is the problem.

Temporarilyh connect your monitor to a different computer (desktop/laptop), to see if your monitor is the problem.

Try a different "data" cable between your monitor and your video-output port.

Jun 12, 2010 | Fujitsu Siemens Premium Line P19-1 19" LCD...

1 Answer

Indicator LED blinking, no display on Fujitsu Siemens L19W-2


I've got the same situation. I think it is old enought to break. I just can't turn on the light behind the screen.

Jun 15, 2009 | Fujitsu Siemens Business Line E18-1 18.1"...

Not finding what you are looking for?
Mag Innovision LT776s 17" LCD Monitor Logo

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mag Innovision Computer Monitors Experts

William Miller
William Miller

Level 3 Expert

8820 Answers

Tony

Level 3 Expert

2598 Answers

Are you a Mag Innovision Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...