Question about Linksys Wireless-N WRT150N Router

1 Answer

How do you change the port for linksys wrt150n from strict to open

I need my ports opened...the ports were opened and then they said "strict"....need to know what and how to handled the situation from start to finish, if you can help...thanx...lowdn1pa@netscape.net

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Sounds like the simplest solution would be to reset the router back to factory defaults. You can do this by holding in the reset button for five seconds or so and then releasing it

If you don't want to do that you can download the manual from linksys at the url below. Sorry it's so lengthy but that's the location.

Let me know how it goes and good luck.

J

http://www.linksys.com/servlet/Satellite?blobcol=urldata&blobheadername1=Content-Type&blobheadername2=Content-Disposition&blobheadervalue1=application%2Fpdf&blobheadervalue2=inline%3B+filename%3DWRT150N_ug.pdf&blobkey=id&blobtable=MungoBlobs&blobwhere=1193768812096&ssbinary=true&lid=1218397537B28

Posted on Feb 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to hook up the Linksys Wireless-N WRT150N Router to DSL?


Connect the dsl modem to port on the router that says Internet
connect 1 pc to any available port on the router(1,2,3,4).
Open your browser and type 192.168.1.1 in the address bar
It will prompt for a username/password window. leave username blank,password admin. Press enter
Normally if you have dsl, you need to set the internet connection type to pppoe and put in your username and password that your ISP provided you. then save the settings.

Oct 04, 2010 | Linksys Wireless-N WRT150N Router

1 Answer

I can't figure out how to open a port on a Linksys WRT150n. I bought a mobile webcam and I should be able to control it over the internet I can never connect unless Im in the network. Research tells me...


Download Routing Commander program from www.routercommander.com, it will automatically forward ports and setup the router. Another option is go to router's web interface and set up it manually according to router's User Guide.

May 21, 2010 | Linksys Wireless-N WRT150N Router

1 Answer

How do i change my NAT from strict to open?


you will need to change some settings on the router.
reduce the MTU.if the MTU settings on the router is 1500 then change 1365.
Also you will need to open some ports on the router.
Click Here for more info

Nov 19, 2009 | Linksys Wireless-G VPN router with...

3 Answers

Need to open ports for linksys wireless home router


Is there any computer connected to the router ?
If not then connect the computer to the router.
check the IP address and the default gateway of the router.
open the set up page of the router.
there you will find the place to place to open the ports on the router.
Click here for more information about roters and network

Jul 24, 2009 | Linksys Wireless-N WRT150N Router

1 Answer

Dont know how to set nat type to open


For you to be able to open the NAT on the router you have to open or forward the application port on it. This router has a graphical interface where you can configure port forwarding, access http://192.168.1.1 (default) username blank and password is admin. Now look for port forwarding and open the port for your application.

Jun 29, 2009 | Linksys Wireless-N WRT150N Router

1 Answer

Can not open up ports for my xbox360 on my Linksys WRT150N router


open up your internet browser, and in the top search box (delete the www ****) and type in: 192.168.1.1. or try 192.168.2.1.

that will open up your linksys router, the default password and user name is: admin

then from in there you can mess around with your ports.

Mar 20, 2009 | Linksys Wireless-N WRT150N Router

1 Answer

OPENING NAT FROM STRICT TO OPEN


Sory to say this .....1 find a tech who knows networking... or.. call Linkys support to help with reset/setup...My final solution.... buy a different router... I've had trouble With Linksys before.

Mar 15, 2008 | Linksys BEFSR41 Cable/DSL Router W/4 Port...

32 Answers

Change NAT to open


I have this router and have just enabled the NAT settings from Strict to Open:-

1. Log into router's IP address (192.168.1.1) and enter password. Select "Advanced Setup".

2. Click on Advanced on left hand menu and select UPnP

3. Check all three boxes in window and click on Apply

4. Close router configuration window and run XBox test again. Worked for me!

Oct 08, 2007 | Zyxel P660HW-D1 Router

Not finding what you are looking for?
Linksys Wireless-N WRT150N Router Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18375 Answers

mark

Level 2 Expert

105 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...