Question about Tissot T-Touch T33759851

4 Answers

Big problem hello, i have a T-Touch watch but the digital clock doesn't match the sticks watch ( or the original one ) and i don't know how to fix it. another problem is that when i touch any task on the watch like the compass or the meteo the sticks don't point at it. so, i hope that some one will help me with this problem.

Posted by on

  • 1 more comment 
  • bunin Feb 26, 2008

    My sticks stopped and when I touch for functions - LCD shows the functions but the sticks move only a millimeter and they can't point at a function.
    I looks like a battery problem, the watch worked for a 5 years.
    But in service center they said it has a mechanism problem and offer to replace the whole mechanism for $286...

  • jeanshay Mar 15, 2008

    My tissot analog watch hands do not match the digitial time. All other features seem to work fine. I tried the solution offered by putting the watch into syncro mode but it would flash syncro the hands would switch to something completely different and then switch back to the same wrong time my attempts at adjustments with the +/- didnt work either. Anyone have more detailed step instructions or ideas? Thanks gents...

  • Anonymous Jun 18, 2008

    i have the same problem, The technitian says i have to change the motor of the clock and it cost 280 dollars.



    Any comments?

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

I had the same problem. As jeanshay said above, put into synchro mode (center push button till beep, cycle to hrs/deg, then hold center push button til beep and synchro shows) I figured out the difference in time on hands and time on digital and lined up both times. Then i set the digital to 12:00 then went into synchro mode again and set the hands to 12:00 so it all lines up straight. The reset time again to correct time Afterwards the watch works fine. You'll have to reset the celcius/F scale and date display to US style or Euro style.
Good for another 5 yrs

Posted on Jun 23, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 2 Answers

Push the touch button and then the centre of the screen untill the units deg C 24h etc come up then hold the touch button for 5 seconds. This puts it in sycro mode. You can then use the -+ buttons to make them both point to 12

Posted on Mar 05, 2008

I had this problem too after changed the battery. But it is solved now. Thanks a lot.

Posted on Apr 07, 2008

THANK YOU THANK YOU THANK YOU!!!!!!!!

Posted on Mar 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

C9 champion digital alarm


Since you don\'t know how to turn it off, the alarm will give you simple instructions. Just stop pressing the buttons. Is there a symbol or an alarm or clock on any of the buttons?

May 10, 2013 | Watches

1 Answer

Unable to set the time in my sportline 3636


You can get instructions by going to http://www.sportline.com/category.php?cat=4
and locate your watch from the list and clicking on your model.

Now click on "more info" and you will find a tab marked "manual"

Oct 23, 2011 | Sportline Big Digit Watch

1 Answer

The digital time and the analog do not match. How can I adjust the time so that the digital and analog will be the same.


You don't say what make of watch you have but working on the assumption that most watches are very similar, try the method used by Casio.

Press the mode button (at 8 O'clock?) to step through the setting program until the display says "HS".

Now press the 2 or 4 O'clock buttons to advance or ****** the hands until the correct time is shown.

Press the mode button until you return to the normal time keeping mode.

Jun 12, 2011 | Watches

1 Answer

My hands are not matched to my digital clock. How can I re-align them?


go to web site "Tissot.com

Select your watch model.

Select "Repairs" from the tabs along the bottom of the screen

Go to "Quick links" and select online manual for your watch.


Jan 04, 2010 | Tissot T-Touch T33759851

1 Answer

How to reset the tissot touch expert? After battery replacement...


hello my tissot watch clock hand are not schronize on the digital number

Dec 13, 2009 | Watches

2 Answers

Hour hand does not match digital time


Hi, activate the touch screen, touch the middle of the screen 3 times slowly until you see the OPT in the LCD. press the middle big button on the side of the watch once until you see the 24H screen, then hold down the same side middle button for 5 seconds, the display will then say SYNCRO.

You first move the hour hand with the top and bottom side buttons to 12 touch the middle of your screen to set then move the minute hand to 12 as straight as you can, then press the middle of the screen to set to exact digital time. Thanks Mark ;-)

Sep 22, 2009 | Tissot T-Touch T33159851 Wrist Watch

1 Answer

How do I change the time on my tissot touch watch


you can adjust the time by rotating the nobe at the back side of your clock,if it is a digital clock it has a button to adjust time ,press the button and see current time and adjust it

Apr 01, 2009 | Watches

3 Answers

Analogue hands don't correspode to digital clock


Hi,

Sometimes a watch will be off center due to shock, dead battery etc. Symptoms are; hands don’t line up, digital and analog time doesn’t match, Compass function doesn’t have the hands exactly opposite etc. This can all be fixed. The Synchronization function can be used:

1. Activate Crystal
2. Tap center until you are the unit’s screen (12h or 24h, F ft or C m).
3. Push and hold (at least five seconds) the center crown
4. Watch will beep and word (SYNCHRO) will appear in the display.
5. Use the top + button to line up the minute hand right on the 12.
6. Use the bottom – button to line up the hour hand right on the 12.
7. When finished, press crown and you will go back to time.

Jan 08, 2009 | Tissot T-Touch T33159851 Wrist Watch

1 Answer

Fix the hands correct with the dejital


Sometimes a watch will be off center due to shock, dead battery etc. Symptoms are;
hands don’t line up, digital and analog time doesn’t match, Compass function doesn’t
have the hands exactly opposite etc. This can all be fixed. The Synchronization
function can be used:
1. Activate Crystal
2. Tap center until you are the unit’s screen (12h or 24h, F ft or C m).
3. Push and hold (at least five seconds) the center crown
4. Watch will beep and word (SYNCHRO) will appear in the display.
5. Use the top + button to line up the minute hand right on the 12.
6. Use the bottom – button to line up the hour hand right on the 12.
7. When finished, press crown and you will go back to time.

Nov 16, 2008 | Tissot T-Touch T33759851

1 Answer

Tissot t touch, time problem


you need to calibrate it.
go to the '24h Cm' screen [T button, then touch centre screen few times]
hold down T button for 5secs
use + button to bring minute hand to 12 o clock position
use - button to bring hour hand to the same place
press centre of screen and it's done!

Phil

Jun 29, 2008 | Tissot T-Touch T33159851 Wrist Watch

Not finding what you are looking for?
Tissot T-Touch T33759851 Logo

342 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tissot Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Wayne Winkler
Wayne Winkler

Level 2 Expert

86 Answers

Vernon Taylor

Level 3 Expert

2031 Answers

Are you a Tissot Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...