Standby powerlight is on,turn on the t.v.,gives out the usual start up hum,light goes out ,tv does not come on.standby lite returns to glow,and then slowly fades out.TV,will not come on,by using remote,nor the power button on the tv itself.I was working fine this afternoon(2-23-08).This tv is new in my 07 Jayco Eagle,purchased 6-1-08.It is only 7 months old.
Any ideas whats wrong with it?I do not have access to the rear of this set,it is in a enclosed compartment.I do beleive it is still under warranty.
Maynard J Henning
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This usually indicates faulty wiring, or miswiring. Disconnect the wires, one set and turn the unit off and on to see if that elimates your problem. If it does, the wiring or component is at fault. If you disconnect everything and have the same problem, it's an internal fault with the unit and will have to be troubleshot. Get and estimate first, to evaluate whether or not it's economical to keep, or replace with a new one. Good luck, hope this helps.
Does the Stereo have an RCA type aux imput?
If it does you should be able to connect the TV via that. If the TV has a scart socket, but no audio out sockets you can get various scart boxes that will have RCA audio out sockets on.
According to Page 46 of the LBT-W5000 Operating Instructions:
"The display stars flashing as soon as you plug in the power cord even though you haven't turned on the system (demonstration mode).
Press DISPLAY (for LBT-W5000 / W300 / XB700 / XB500) or DEMO (STANDBY) (for other models) while the system is off. If the system is in the Power Saving mode, press POWER SAVE / DEMO (STANDBY) (for LBT-W5000 / W300 / XB700 / XB500).
The demonstration appears automatically the first time you plug in the power cord, or if there is a power outage lasting longer than half a day."
I tested this today, as my LBT-W5000 was in Demonstration Mode. It definitely works. The only catch is (at least on the W5000), and it's a minor one, you have to reset your clock afterwards.
hi , i just saw ur mail although I do not have the solution to this but I am keen to know how you are using these speakers as I too have identical beolab 6000 and beolab 9000. I was thinking of connecting them to a preamp. What do u suggest ? Pls guide
I had the same problem. I can't fix it, and neither could RCA customer service. The only way I could think of was to find a surge protector extension cord that had a on/off switch to make it easier to turn on. Another solution might be to buy a cheap wall timer, the kind you use to turn lights on/off. That resets it every day and it should be OK.