I have this cd player and evertime I put a cd in I press play and after it starts loading it then shows me a error. the batteries are fine and the cd is fine there were no scratches anywhere and plus it was accidentally dropped by my dog so I don't know what to do. HELP ME PLEASE!!!!!!!!!!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Have you try a Cleaning Disk.
Maybe you can use a compress air can (usually sell in pc/electronics stores) and clening up the laser lens.
Check for dirty on discs, water drops or scratches. Try another CD
Hope this help.
There may be a couple of reasons why a NO DISC , DISC ERROR or INSERT DISC error may appear in the display of your CD player. Try doing the following steps to troubleshoot why the error is displayed:
For disc players with a HOLD switch, make sure to move the switch to the OFF position.
Verify that the disc being used is supported by the CD player. NOTE: CD players do not support VCD or DVD discs. In addition, some CD players do not support CD-R or CD-RW discs that are created by a CD burner. For information regarding disc compatibility with your player, refer to the operating instructions supplied with the product
Ensure a disc has been inserted into the player. Make sure that the disc is inserted correctly, with the playback side of the disc facing down on the disc tray.
If the disc still does not play, attempt to play a different, commercially-produced disc.
NOTE: If more than one of the commercially-produced discs do not play, verify whether the discs are extended-length discs. Some players are not able to play discs where the recording exceeds the standard 74 minutes. If the recording of the disc is longer than 74 minutes, it is possible that some of the specifications of that disc were compromised and therefore, the CD player will not recognize that disc.
If the disc is dirty with fingerprints or smudges, or if the disc is scratched or broken, the CD player may not recognize the disc.Clean the disc using a soft, dry cloth.
Properly reinsert the disc into the player.
Attempt to play the disc again.
Only press the PLAY button once. If the PLAY button is pressed more than once, the disc may stop playing.
If the disc is still not recognized, remove the disc and leave the CD player powered on for approximately one hour to resolve the possibility of moisture condensation inside the player.
Please use a Lens Cleaning disc and check if that helps.
If the issue persists, please click hear to locate the repair facility near your area.
Thanks for understanding. Please let me know if you require any clarifications.
When you turn on the unit the cd draw seams to open. I hear it making a noise like if it is trying to get ready to play. When you shut the draw it won't play, change tracts, or the disc thing to put in more disc wont work. Someone please help me
The file not formatted message is not an error that a repair will fix.
The songs that you have loaded onto the player are in a format that the player does not support. Do yourself a favor, and only download files that rae in mp3 format - they will never give you problems, error messages, require long explanations, etc.
The best solution for this problem is to take it back to the store where you bought it. If you don't have any warrenty left, take it to an repair shop, assuming that your not a electrician, or have any knowledge about this.
It means that the laser/motor module is disconnected. Open the player and locate the connection band of the module. It should be orange, about 1 cm wide and it comes out from under it. Push it HARD into it\'s socket. Make sure you don\'t leave sweat or grease on the electronic and test it. I hope it works for you!
Your cd-player fails to read the discs. assuming the disc isn't damaged your problem might result of many diffrent reasons, from dirty lens to bad mechanism, memory problem or bad circuit.
You will need to have it checked by a professional technician.