- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
normally Motorola uses a default code for master reset. which is 000000" .
1. Open your phone up and go to “Settings” 2. Next go to the selection for “Initial Setup” 3. Next go to the selection for “Master Clear” 4. Then select to confirm the option. 5. Now enter the security code which should be “000000” 6. Finally press select or ok and the phone will reset itself to the factory condition.
to fix the 'security code' problem on a Razr V3c, TRY the following. It WORKED forme when default "000000" failed to work.Settings > Initial Setup > Master Reset; To reset alloptions, you need to enter the Security Code 183729. After that you can then reset your new security code to whatever you want, including back to default "000000".
you can press the menu button when the phone is asking for the unlock code, then the security code prompt will come up on the phone , now if you have not changed the security code it will be 000000 if you have change that code also just type the one you changed it too.
ok this will help you solve the problem... go to menu, settings,
initiall set up, master clear code(000000) the phone will boot..just
w8,., then go to menu again, settings, initial set up, master reset
Code ( 000000)... boot.... just w8, and it gonna work out fine.... let
This is an easy fix. First go to the menu then settings, Initial Setup, Master Reset. It will then ask for a security code. The code is 000000 (six zeros). It will ask if you want to reset your phone. Hit yes.
if it is asking for unlock code, enter your 4-digit unlock code. if does not work, by-pass with our security code by pressing the menu button and enter your security code. if you have not changed your security code, enter 000000 and hit ok. if it won't bypass, send in to service center or software reflash.