Question about Altec Lansing AVS 300 Computer Speakers

2 Answers

Opening the speaker

Hi,

I have Altec Lansing AS300 speakers. The problem i have is with the ON?OFF switch not functioning. The switch is on the right speaker. If i hold the on/off switch down the speaker works. I do not see any screws etc to open the speaker. Any suggestions.

Thanx
Badri

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I had to break it to get the satellite speaker open. once it was open, i looked to see if there was a simpler way i could have do it. much to my suprise- no, there wasn't. it seems the plastic is melted together. what i did to open it was use a fairly sharp flathead screwdriver and a hammer. it took me about an hour. ironically, my speaker looks like garbage now, but plays great (as opposed to it looking decenct and not playing, thus making it actually garbage).

Posted on May 13, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Prodigy:

    An expert who has answered 500 questions.

  • Expert
  • 618 Answers

Hello there!
First things first!
1) you can RMS if warranty is there, uset, change your Spks!
2) you can open the speakers and change the power on SW, for another on Radio Shack there is a lot of them. But carefully on the welding.
good luck!

Posted on Feb 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

9 pin diagram altec lansing


can anyone help me with the Altec Lansing VS4121 2.1 Channel i need the wiring diagram of 9 pin cable i broke it. please mail me the layout at maurya.mohit07@gmail.com

May 20, 2012 | Altec Lansing VS4121 2.1 Channel Powered...

1 Answer

How do I get my altec lansing bx1121 speakers to work on my computer?


just plug it in the computers 3.5mm jack and switch on the speakers from behind the right hand speaker and volume control is above that speaker. there must be manual you can just read it and try.

there may be a possibility that your sound driver is not installed so check that first.

Jan 04, 2011 | Altec Lansing Multimedia Computer Speakers

3 Answers

Where to find a speaker replacement for InMotion IM600


hi,i have 2 speakers salvage from im600 ozzyris7@hotmail.com

Mar 24, 2010 | Altec Lansing Inmotion-IM600...

1 Answer

Need advice on Altec Lansing x5021


Altec Lansing is the best company to buy speakers if you watch movies or listen to music. it hits both deep and a strong bass. These are the best speakers to buy.

Feb 25, 2010 | Altec Lansing MX5021 System

1 Answer

Altec lansing speakers are not being detected by the computer


Hi, calebgee click on this site, hope you find what you need! http://list.driverguide.com/list/company64/ "If this helped? Feedback is appreciated, thanks paul7of9"

Feb 18, 2010 | Altec Lansing 221 Computer Speakers

1 Answer

Need a driver for the altec lansing 45.1


i'm guessing you have an audio output problem.

you might not have installed the sound card driver or your sound card is not functioning.

this speakers does not come with drivers... just plug in to speaker output which is the green one. turn the speaker on and walah!

Jul 31, 2008 | Altec Lansing ACS 45.1 Computer Speakers

2 Answers

Sub Woofer does not work


hi there are fast checkings for you: Quick Connect Card http://www.alteclansing.com/downloads/641QCC.pdf manual: http://www.alteclansing.com/downloads/641_MAN.pdf is the system working fine exept the sub? my guess: the headphone jack works fine then the speakears are too if soo then the sub amp is bad or some connection is torn try opening the sub and see if everything is hooked right and if soo then the amp is the problem every electronics shop can fix this good luck

Mar 21, 2006 | Altec Lansing 641 Computer Speakers

Not finding what you are looking for?
Altec Lansing AVS 300 Computer Speakers Logo

Related Topics:

766 people viewed this question

Ask a Question

Usually answered in minutes!

Top Altec Lansing Audio Players & Recorders Experts

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

618 Answers

The Knight
The Knight

Level 3 Expert

73451 Answers

Jerry Umali

Level 3 Expert

979 Answers

Are you an Altec Lansing Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...