When I changed printer ink cartridge it will not print

Hi, when an ink cartridge runs low in your HP Officejet 5610 All-in-One printer, you will see a message on the printer's display screen. Faded-looking text or pictures also indicate low ink. Ensure print quality by replacing ink cartridges when they run low.

Instructions

Things You'll Need:

* HP #27 or #56 black, #22 color or #58 color photo print cartridge, or compatible equivalent



Turn printer on if it is off. Never attempt to change the ink cartridge if the printer is off. If it is off, it will not properly position or release ink cartridges, and attempting to change the ink cartridges may damage the printer.


Open the print-carriage door, located on the right side of the printer. The print carriage will automatically move into the access area.

Push down on the top edge of the cartridge you are replacing to pop it out of its slot. Remove the print cartridge and discard or recycle.


Pull off the protective tape on the new print cartridge using the pink tab. Do not touch any part of the cartridge except the black plastic. Touching the contacts or ink nozzles under the protective tape can damage the cartridge and result in poor print quality.


Hold the cartridge upright and push gently forward into the empty ink cartridge slot until it clicks.


Close the print-carriage door.

You can also use this video clip to learn more:

youtube.com/watch?v=wVXUndG-o_Q.

Please don't forget to rate me thanks.

Thanks for using fixya...

Hello Garthplunket,
I will provide you a HP document where you will find the steps to change the ink catridges.  This document also have the detailed information like:
Print cartridge part numbers Replacing the ink cartridges Calibrating the print cartridges Calibrating the print cartridges using the Toolbox Checking the ink level


Here is the link:

http://h10025.www1.hp.com/ewfrf/wc/document?docname=bpd09327&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN

try:

• Certain colors are missing or no ink prints on the paper
• Black ink does not print
• How do I perform a print head cleaning?
• Error Number 91: The following ink cartridge will be used for the specified printing.
• How do I check the amount of ink I have remaining?
• How do I display the remaining ink level indicator?
• How do I install the ink cartridge(s)?
• What is the ink cartridge capacity?
• How do I print a Self Test / Nozzle Test?
• ChromaLife100 System Compliant Inks
• How do I change the Ink Cartridge Setting on the printer driver?
• How do I confirm the ink cartridges are installed properly?
• How do I replace the ink cartridge(s)?

Changing a printer cartridge is not complex but improper handling of the parts may damage the printer and the cartridge. If the user notices that while printing the ink comes out dry or faded, it may be time to change the ink or the toner. The user will know if it is time to change the toner because instead of a sharp image, one will get a faded image. It is time to change the ink cartridge when the printing comes out spotty or colors are used to replace others —for instance, blue for black or yellow for red. Remember, faded images signal the need to change the toner; spotty printing signals the need to change the ink cartridge get more help for change cartridge .
Hope this helps you.

Hi, the information you need is here:

http://support.epson-europe.com/onlineguides/en/sc46/index.htm

Just click on the replacing ink cartridges on the left hand side, follow the instructions and pictures there.

Hi, When using refilled print cartridges, the Estimated Ink level and the Printer Status Window may indicate that the print cartridge is out of ink. Either continue to use the print cartridge until print quality degrades, or replace the print cartridge with a new HP print cartridge.

The methods of replacing the ink cartridge of the printer follows here:
Open the printer cover
The printer ink carriage will automatically goes to center
Once the carriage is in the center, the printer was ready to replace the ink.
Pull the down slowly the ink tank off the carriage..
Remember the place where the color/black position.
Remove each tank one at a time, and replace the ink with a new one.
Close the printer cover and it now ready to printer.

HP Deskjet 6500 Series Printer - Setting Definitions

Hope the instructions provided helps.

The printer is very good.I ve been using it for approx 1 year now.The printer works on a combination of both black as well as colour ink cartridges.If any of the cartridge is empty,printer will not print.Kindly call Kodak with your problems at 1800 421 6699 and they will take care of the issue for you.

Calibrate your new blank ink cartridge, have some nozzle check, cleaning check, and printer alignment. This are procedure that new ink cartridge will have to calibrate before you use. Epson printer are very sensitive when capable of changing ink cartridge. Unlink HP directly work without any print test because the cartridge head and ink join together, Epson with ink cartridge and the head separate.
Have some test on it at Printer Maintenance.
I'm sure 100% works on it.
Good luck!

Light/faint prints usually are a result from clogged ink or air bubbles between the cartridge and print head (thus changing cartridge wont fix problem). Try printing the test page print from the machine (Ink Management -> set/ok twice). Answer the question(s) in the display and repeat this up to five times. The colors should be improved after 1-3 test prints usually.

Deskjet 5100 series

1. Click Start or , click All Programs , click Hewlett-Packard , and then click Printer Assistant .
2. Click Utilities .
3. Click View ink levels .
   • If a cartridge is low on ink, discontinue these steps, replace the cartridge, and then try printing again.
   • If the cartridges contain a sufficient amount of ink, continue to the next step.
4. Click Printer Maintenance .
5. Click Clean Cartridges .
6. Follow the on-screen instructions.

ISSUE: After installing a new HP Inkjet print cartridge, the ink level indicator remains at the previous level. SOLUTION: Continue to print and ignore the ink level indicator. The print cartridge is full of ink, it just is not being measured accurately.