Question about Routers
I am trying to install it in my home for wireless?
Log into the firmware by the following steps
1 open browser and type 192.168.2.1
2 goto advanced
3 user name and password should be admin and admin
4 click on home networking modem
5 click on reboot
6 click on reset to factory defaults
7 click reboot
once rebooted repeat step 1 this time it will ask about setting it up make sure to select router only configuration
reboot modem and setup wireless cinfiguration
Posted on Aug 30, 2009
Ans what is the problem???
Posted on Feb 25, 2008
"If your PC has not been connected to a broadband modem or other network device, you will need to
perform the PC configuration procedure below. Remember to restart each PC when finished. If your
PC has been connected to a broadband modem or other network device, continue to the “Using the
Wireless Connection” section below.
1. Start your Web browser. In the Address box, enter the following: »speedstream.
2. Press Enter. The SpeedStream Simple Setup Wizard will launch.
3. When prompted, enter the Internet connection information provided by your
Internet Service Provider.
4. At the end of the Setup Wizard, you will be given the option to either connect to
the Internet or further configure the optional settings of the gateway.
5. If additional configuration is desired, select the icon for the service or option
you wish to configure: the gateway’s firewall and security settings, User
Profiles and content filtering, or home network options."
"Using the Wireless Connection
By default, the SpeedStream® Gateway is configured to work
seamlessly with other SpeedStream® wireless products. The default
wireless interface settings are:
Mismatched wireless settings will prevent successful
wireless network connections between devices, so
you may need to reconfigure some wireless settings
to ensure that all settings match between wireless
devices if you are:
a) Using another manufacturer’s wireless products
b) Adding the SpeedStream® Gateway to an existing
The Setup Wizard will walk you through setting up wireless settings."
Posted on Jun 16, 2009
not possible to retrieve a password! that's why they are secure... if you have your ISP ADSL setup details you can reset the router to factory default and reprogram it from scratch, or call their help desk BEFORE you do it and ask them to email you the connection details before you start. then WRITE the password on a label and stick it to the router.
Posted on Mar 26, 2010
SOURCE: need driver for speedstream 6520
You really don't need a driver to get a router up and running. Just plug this on to your PC . This should get it going. I have a link that explains how to set the router up.. Run through this document. This will help http://www2.windstream.net/downloads/links/SpeedStream211.pdf
Posted on Aug 10, 2011
Tips for a great answer:
Jun 15, 2015 | Siemens SpeedStream 6300 (33A6300001)...
Aug 10, 2011 | Routers
Jun 27, 2011 | Siemens SpeedStream 2624 (SS2624) Wireless...
Mar 25, 2010 | Siemens SpeedStream 2624 (SS2624) Wireless...
Sep 24, 2009 | Routers
Jun 14, 2009 | Routers
Jan 09, 2008 | D-Link AirPro DI-764 Wireless Router
Nov 11, 2007 | Routers
3,138 people viewed this question
Usually answered in minutes!