Will the midland 4001 still work in the uk?

make sure the channel 9/19 switch is off / set to normal

check here
The CB Radio Talk Forum

any where between channel one and channel forty.Unless you have side band then its the upper and lower of all these channels.

You may download the driver from here.

Hi my name is John. Try pressing the EMG. button...hope this helps..

can you clarifiy? please

http://www.geocities.com/open_channel/micwiring.html

If it has a PLL 02A chip they are not to hard to
trick is it hss any thing eleas it will be verry hard.
May be this will help

first check out the front for a circle with 27/81 this is the 40 channel (FM). if you cant find the circle it is (AM) and not used as much in the uk. if it means alot to you and your dad post it to cb communications shildon DL4 1HE and i will will see want i can do.

SWR OK? Is it throwing a dead-key carrier? No carrier? Midlands many times will show what looks like a processed modulation signal but is not going out your finals on the radio, and out the antenna. Suggest an external in-line meter to see if there really is a transmitted signal. If there is a signal, look for a broken/bad wire at the mics plug-in end. If no signal on the add-on meter, suspect an audio chip or final that's defective. All three are fixable at a GOOD CB Shop.