- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Since you neglected to specify the model of your Uniden DECT 6.0 phone I can only suggest you select it from the list beginning here to download a copy of the manual and the remote access instructions.
Go to the base unit.
scroll to the answering machine option.
Under there is a setting for your security key.
you can read what's there, or change it to your own two digit code.
when you call in, during the message, enter that two digit code and it'll go into messages. There's a "toll saver" mode so that the machine answers after two rings instead of 4, so that if you call and it rings 3 times, you know there's no new messages.
this instruction may help you , if not a model number could help , but try these instructions . thanks
To operate from a remote location, use any touch-tone telephone, and follow these steps: Call your telephone number and wait for the answering machine to answer. If the answering machine is off, it will answer after about 10 rings and series of beeping sounds. During the greeting message (or a series of beeps when the answering machine is off), press  and enter your PIN code within 2 seconds (see "Setting a Security Code or Personal Identification Number (PIN)" on page 57). The answering machine announces the current time and the number of messages stored in memory. You hear "To play incoming messages, press zero-two. For help, press one-zero." You will hear a beep. Enter a remote command within 15 seconds, each command there after must be entered within 2 seconds. You may select a command from the following chart: Remote Commands
Command 0 then 1 Repeat a Message* Command 0 then 6 Answering Machine On Command 0 then 2 Playback Messages Command 0 then 7 Memo Record/Stop** Command 0 then 3 Skipping a Message Command 0 then 8 Greeting Record/Stop** Command 0 then 4 Deleting a Message Command 0 then 9 Answer Machine Off Command 0 then 5 Stop Operation Command 1 then 0 Help Guidance
we can get a link to your manual if we had model number