Question about HP Officejet 5610 All-In-One InkJet Printer

2 Answers

Error code: 0xd0620230

Cartrage stop moving and all power ,copy ,scan and fax buttons are lightening When I copy or print in the middle of the printing i get error code 0xd0620230 Reset Power. How can I get the printer to not give me this error code when I print? I have tried to keep printing but every time I get the error.

Posted by on

  • AntekSkva Feb 26, 2008

    I have tried everything I can. Without any hookup to computer and no software installed. I cannot copy a full page without getting that same error. How do I get rid of that error?

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 317 Answers

Make sure that you have the latest firmware, hardware and drive updates downloaded and installed from HP. Next, try uninstalling the printer ans the software that came with it. THen reinstall everything according to the manual.

Posted on Feb 23, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,889 Answers

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

Canon MP145 error E27


  1. plug off power cable
  2. press and hold stop/reset button
  3. plug on power cable
  4. press and hold power button(still hold stop/reset buttn)
  5. still hod power button, loose stop/reset button
  6. press stop/reset 2X then loose power button, wait until 0 displayed
  7. press stop/reset 1X
  8. press power button 1X, printer will print 1 time
  9. press stop/reset 2X
  10. press power button 1X,printer will print 1 time
  11. press stop/reset button 3X
  12. press power button 1X ( no print proses)
  13. press stop/reset 4X
  14. press power button longer than before for turn off printer, if print not turn off plug off power cable
  15. turn on printer and error 27 will disappear
i hope this helpfull
thanks for using fixya

Jan 25, 2011 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

I have a Hp photoshop 3210 printer ink cartrage error empty or


I installed new cartriges, but my printer keeps giving me an error msg, Ink system has failed. Unable to copy, receive faxes, or print. Refer to printer documentation. Error: Oxc18a0206. What do I do now?

Nov 06, 2009 | HP Photosmart 3210 Printer

1 Answer

What is Error 2200 when I try to fax something?


Error 2200 is a scanner stall error.. there are a couple things for you to try to fix it:

Power off the AIO and remove the power supply(Power Cord) from the back of the unit.
Open the scanner cover. Check the scanner glass for cracks and the scanner casing for cracks. Close the scanner lid.
Open the top cover of the AIO.
Using the carrier belt, move the cartridge carrier to the middle of the unit.
Remove both cartridges, close the top cover, reinsert the power supply, and power the AIO on.
IF THE ERROR MESSAGE DID NOT COME BACK....
Power off the AIO and remove the power supply from the back of the unit.
Open the top cover of the AIO.
Using the carrier belt, move the cartridge carrier to the middle of the unit.
INSERT THE COLOR CARTRIDGE ONLY,
Close the top cover, reinsert the power supply, and power on the AIO.
IF THE ERROR MESSAGE RETURNS.. GET A DIFFERENT COLOR CARTRIDGE AND REPEAT THIS PROCESS....
IF THE ERROR MESSAGE IS GONE,
Power down as before, do all the same to get the carrier to the middle of the unit and RE-INSTALL THE BLACK CARTRIDGE.
Power back up as in previous steps...
NO ERROR? SHOULD BE GOOD TO GO..
ERROR?? TRY DIFFERENT BLACK
If after trying all of the above and the error message does not go away, you unit would need serviced (if it's under warranty, it's worth it; if not, you might want to replace it.)

Jun 29, 2009 | Lexmark X7170 All-In-One InkJet Printer

2 Answers

I have a Ink System Failure.


IssueAn 0xc18xxxxx or 0xc19xxxxx ink system error code displays on the front panel. The printer cannot copy, receive faxes, or print. Solution
Press the On button to turn the printer off. 
Unplug the power cord from the back of the printer.
Remove all the ink cartridges.
Wait two minutes.
Plug the power cord into the back of the printer.
Press the On button to turn the printer on. 
Install the ink cartridges when prompted.
If the error code does not display, the issue is resolved.
If the 0xc18xxxxx or 0xc19xxxxx ink system error code displays on the front panel, service the printer.

Dec 20, 2008 | HP Photosmart C5180 All-In-One InkJet...

2 Answers

Scanner Failure, 'Power off and on' message - therefore, fax will not work


Scanner failure will not let you to make copies nad scan but you will be able to print from computer and receive fax.

Even then try the steps mentioned bellow:

Remove both the ink cartridges from the All-In-One.
Unplug the power cord from the All-In-One as well as the power outlet.
Now move the carriage (carriage is the one which holds the cartridge) Too and Fro till you feel the carriage is moving smoothly.
Then insert the cartridges close the access door.
Plug the power cord directly to a wall outlet without surg protector (If possible connect it to a different power outlet)
Before connecting the power cord to the All-In-One press and hold the # and no 6 button and then insert the power cord, do not release the keys
until you see a message a reset (if the screen goes blank then release the keys and turn the power on)
Now try printing Printing from computer,
If you are able to print from computer you should be able to receive faxes.
Try printing a test fax.

Press Menu/Setup> Then press the right arrow key to locate Tools> Then Press Ok> Again press the right arrow key to locate Run Fax Test> And press OK

Check to see if it prints a Fax test

Good Luck

Aug 29, 2008 | HP OfficeJet 7110 All-In-One Thermal...

2 Answers

Oxd0620230 reset power


Hi,

Below is the document that i want you to follow exactly in order to resolve you issue.

CLICK HERE ==>> DOCUMENT

Please let me know the outcome after following the steps.

thank you so much.

adonscott

Jul 17, 2008 | HP Officejet 5610 All-In-One InkJet...

1 Answer

Error Code problem


My mother's printer had a similar problem, I was able to find this solution on the HP site.

Disconnect the USB cable from the back of the printer, but leave the printer turned on.

Open the cover of the printer and remove the print cartridges.

Close the cover and wait for the Insert Ink Cartridges message to display.

Disconnect the power cord from the back of the printer and wait for one minute.

Reconnect the power cord. If the printer does not automatically turn on, press the Power button.

Open the cover and reinsert the print cartridges.

Close the cover. If prompted, print a calibration page.

Reconnect the USB cable, and try to print a print job from the computer.

I hope this helps you too...

Jun 20, 2008 | HP Officejet 5610 All-In-One InkJet...

1 Answer

Cartrage stop moving and all power ,copy ,scan and fax buttons are lightening


Hi,

It might be a hardware issue however u can try the following basic troubleshooting steps .

Unplug the power cord from the back of the unit . try to move teh carriage manually .

perform a reset as well .

1
Take out the cartridges from the unit .
2
Make sure the unit is connected to the wall jack directly without any surge protector.
3
Unplug the power cord from the back of the unit ( without turning off the unit ) .
4
Now press the # and 6 key together , while holding these keys down plug in the power cord back into the unit .
5
Do not release the keys after a few seconds u will find te hp logo or bars moving across the screen .wait while the unit turns off.
6
after one minute turn on the prnter . it will go into alligment phase > let it finish .
7
after its done > try to make a copy .

Note - you can also try the Ok n cancel key combination in place of # and 6

Thanks

May 27, 2008 | HP Officejet 5610 All-In-One InkJet...

5 Answers

SCAN,COPY,FAX PROBLEM


Issue An 0xc18xxxxx or 0xc19xxxxx ink system error code displays on the front panel. The printer cannot copy, receive faxes, or print. Solution
  1. Press the On button to turn the printer off.
  2. Unplug the power cord from the back of the printer.
  3. Remove all the ink cartridges.
  4. Wait two minutes.
  5. Plug the power cord into the back of the printer.
  6. Press the On button to turn the printer on.
  7. Install the ink cartridges when prompted.
If the error code does not display, the issue is resolved. If the 0xc18xxxxx or 0xc19xxxxx ink system error code displays on the front panel, service the printer.     Here is a manual if you dont already have one.   http://h10032.www1.hp.com/ctg/Manual/c00486336.pdf

Oct 26, 2007 | HP Photosmart 3310 Printer

Not finding what you are looking for?
HP Officejet 5610 All-In-One InkJet Printer Logo

344 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96396 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...