Question about Jenn-Air SVE47100 Slide-In Electric Kitchen Range

1 Answer

Electronic Display The display on our Jenn-Air Range (SVE47600B) has dimmed to where we cannot read the display. Occassionally we can just barely read it but mostlt not. I replaced the electronic clock board after the clock displayed dimmed to nothing. Now the fan and oven light will not go off and the buttons on the front don't work which control the oven.

Posted by on

  • 1 more comment 
  • Sodbuster Feb 27, 2008

    We had the same problem ordered a new board didn't repair the problem so ordered a new face plate didn't help ordered a new board then we were treated with this light and fan problem.. no repair people are interested in helping so what do we do junk a costley product ? Or can I get a repair manual??? Jack ...

  • daryl67 Apr 14, 2008

    The clock panel led(s) could only be seen when it was dark in the kitchen. The control panel worked fine for about 6-9 months. Then the "broil" function failed, and the "bake" function was beginning to be intermittent. Seemed like you had to push the button numerous times before you got the "Beep". Replaced the clock panel and the clock light was restored however the bake, broil and clean functions were inop. Put the old panel back in and now no lights and no Bake, Broil, or Clean.Functions on the right had side of the control panel seem ok. How would I determine of the front panel is the culprit, or the relay board or whatever???

  • Kathfrank Apr 21, 2008

    Hi, I have a similar problem. I bought my Jenn-Air slide in (SVE47600WC) 8 years ago and now I am starting to barely see the clock or the temperature of the oven or the time remaining on my timer due to the digital display being so dimmed. What is the solution here, do I need a new part, is it something that I can change myself, is it an expensive part? Where can I find instruction on this?



    Thank you,

    Kathfrank

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Further inspection found that the ribbon got damaged during the re-instalation of the clock board. A new front control board had to be ordered and installed.

Posted on Feb 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Range has a very dim display


I have a Jenn-Air double wall oven with a very dim display light. Replaced c3 capacitor 68uf 35w - with a 100uf 50w cost $1.60 closes size available at Radio Shack and works good as new. Requires soldering onto the circuit board. I price a replacement part for $276.00.

Mar 19, 2014 | Jenn-Air 27 in. Electric Single Wall Oven...

1 Answer

Jenn-Air model #sve47600b. Today put new display control panel in. Didn't fix the problem. The display now works, but the oven light and fan will not stop running. Also the touchpad doesn't work. If it...


Make sure that you properly plugged in the keypad cable. There is the wide connector that brings all the keypad touches up to the display board, and there is the small 4-black wire connector that brings power to the control board.

For future reference, we repair electronic control boards at www.fixyourboard.com, maybe we can help you in the future.

Oct 08, 2009 | Jenn-Air JES9860 Electric Kitchen Range

1 Answer

Jenn Air SVE47600b dead touch panel and blower runs constantly


I have had similar problems:
Display was the Part # 71001799 circuit board..$175+labor
Oven blower problem was control relay board, part# 12001689...$224+labor
My solution. replace with non-Jenn Air.
Check Consumer Reports. Jenn Air has high repair history.

Mar 14, 2009 | Jenn-Air SVE47100 Slide-In Electric...

3 Answers

Electronic Display


Go to, fixitnow.com for a cheap fix on these displays. It worked on my jenn air.

Oct 29, 2008 | Jenn-Air JES9860 Electric Kitchen Range

1 Answer

Display panel


Dim display indicates a "failing" electronic oven control. It will continue to get dimmer and dimmer until it fails completely. You need to replace the "clock" (sometimes called the ERC <---Electronic Oven Control)

This is a tricky repair. Be sure you have the power off (at the breaker box) before attempting this.

Tracy

Oct 28, 2008 | Jenn-Air WW27430P Stainless Steel Electric...

2 Answers

Jenn-Air Convection Oven


Our 7 year old "Jenn-Air Convection Oven", Canadian Model # SVE47600 also has a very dim display. We can barely read the temperature on the oven. Does anyone know what is wrong, how to fix it, and what it may cost us?

Dec 20, 2007 | Jenn-Air SVE47100 Slide-In Electric...

2 Answers

Jenn-air slide in range/convection


I put a $.12 capacitor on the display board and the display came back. capacitor in position c3, part from mouser electronics, #746-uvy1v680med

Dec 19, 2007 | Kitchen Ranges

1 Answer

Electronic Display


This is a common problem with Jenn-Air and Maytag that I have found. There is no way to brighten the display and usually requires the replacement of the Electronic Oven Control (EOC) board. I think this may have something to do with the placement of the board and possibly being damaged by heat from the oven over a period of time. Do you do a lot of baking? Do you use the self-clean mode for your oven a lot? These seem to be contributors to these boards failing like they do. I know of one person who has replaced the EOC 6 times on the same stove. I don't know if this is the advice you were looking for, but I hope it helps you.

Jun 17, 2007 | Jenn-Air SVE47100 Slide-In Electric...

Not finding what you are looking for?
Jenn-Air SVE47100 Slide-In Electric Kitchen Range Logo

500 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jenn-Air Kitchen Ranges Experts

Mike Carew

Level 3 Expert

969 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

 Fix Your Board
Fix Your Board

Level 3 Expert

310 Answers

Are you a Jenn-Air Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...