CD is stuck in player clarion 525 and is not coming out what should I do ?

in many of these changers error 2 means there is a cd stuck in the player, inserting an empty magazine for it to slid into often helps

press and hold the "am" button for a couple seconds. press the forward button next to volume knob until it says clock. rotate volume to change time(there is am pm) and press forward again to change between hour and minute. press the play/pause button to "save" changes. hit the am button to return to the correct time :D
hope that helps

have u tryed holding the eject button for ten seconds my clarion does the same thing but it should eject the cd

Your antenna remote is installed on the amplifier turn on lead.
When your Radio switches source - it thinks the antenna should go down and drops the signal (and thereby dropping the signal to your amplifier).
Swap the 2 "blue" wires and you'll be all set.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Beefy, I think your caps button is stuck.. anyway,
Recommend contacting a local car audio professional or Clarion customer support directly here:

https://clarion.com/xe/en/user-support/inquiry/contactus

the cd mech needs to be replaced.

Accele electronics may carry those.

http://www.iatft.com/Pages/qp_front_page.htm

Give it a try

http://www.clarion.com/jsp/search/ProductManuals.do You should be able to get the the manual from this link. If you need help let me know. Good luck
-Andrew Hawkins

Typically means the CD is stuck, has a reading error, or the magazine is stuck. If jammed, you'll have to clear the stuck CD which may require disassembly. Try removing power and rebooting.

If all else fails, I recommend contacting a local car audio professional, or you may contact Clarion customer support directly by clicking here:

https://clarion.com/xe/en/user-support/inquiry/contactus

I trust this information has proven beneficial.

You can take two butter knives and slip them into the CD player and grab the CD. You should be able to see it in there. Just use the knives like a set of tongs. I did this before worked well, I actually used tweezers to do it as well. Each should work well