Question about Washing Machines

1 Answer

Admiral mega 22 plus heavy duty 2 speed washing machine

I can not keep my washing mach in balance during the spin cycle

Posted by on

  • 3 more comments 
  • qqqqqp Feb 24, 2008

    yes my machine is out of balance on the spin cycle even with no cloths in it.

  • qqqqqp Feb 26, 2008

    my admiral washing machine is out of balance during the spin cycles,even if there are no cloths in it.I have checked for springs but could not find them.It is model #aw20n2w rev 17 ser no 17414222uf. Can you help me on this one?

    keith49203@aol.com

  • mailrtb Nov 26, 2008

    This machine does spin out of balance even with no clothes in it. It seems that either a shaft is bent, or some type of balancing mechanism is shot.

    Anyone know if this can be fixed permanently and reliably? What parts may be needed? Obviously this is a common problem as others have written about it. But is tthere a fix?

  • Gary Davd
    Gary Davd May 11, 2010

    No you have a UK machine and I cant help you

  • Gary Davd
    Gary Davd May 11, 2010

    does it do the same thing with no clothes in it??

×

1 Answer

I think my set i just got today used is a 3 speed.Seems to be alright for now.There is a thing i was told called a harmonic balance it might be off or messed up.Tina.A(nc)

Posted on Apr 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Model ATW 44775x00. Why does it become unbalance during spin cycle?


The tub balance could have been upset when the machine was moved to storage.

Oct 20, 2015 | Admiral Washing Machines

3 Answers

I have a Whirlpool Heavy Duty-Super Capacity Plus, 7cycle/2 speed. Model LSR7200EQO , the agitator stopped working


My whirlpool heavy duty 2 speed 7 cycle washer machine stopped working, It fills up and aggitates for the first cycle then when it should drain and spin it doesnt drain nor spin

Jun 05, 2010 | Whirlpool LSB6200KQ Top Load Washer

1 Answer

The lid on my top loading admiral mega 22 plus washing machion is


These are plastic and will need to be replaced with new.
Once you have sourced new hinges then the machine top needs to be opened,
Electrically Isolate the machine, then at the joint between the machine front panel and top insert a flat blade 4" from each side to release the lid catches, tilt back the top to access the screws on the hinges and replace with new.

Mar 03, 2009 | Admiral AW22 Top Load Washer

1 Answer

Admiral Heavy Duty 22lb. 2 speed motor going off balance


Had Same problem. Replaced The 6 retaining springs and snubber.
$15.00 worth of parts.

Dec 22, 2007 | Admiral AW22 Top Load Washer

Not finding what you are looking for?

Open Questions:

0 Answers

Kenmore Elite HE4T Washing Machine Diagnostic Test Didn't complete and clothes aren't spun as dry as in the past I have a Kenmore Elite HE4T washing machine and I noticed that recently it isn't getting all of the clothes completely dry from the final spin cycle. Thus, the dryer has to run through two cycles to get the clothes dry. I did a bunch of research and made sure there weren't any kinks or blockages in the drain lines; and opened up the bottom of the washer and cleaned out the drain cleanout. I found a few pennies, but everything seemed to be working ok. I ran a load and had the bottom open so that I could make sure the motor, drain and belt were all working properly. The drain does get the water out of the washer, so the clothes aren't sitting in water, they just don't seem to be spun as fast or as long as they used to. I always put it on the "extra high" spin setting no matter which type of load I run. So, I found a way to run the diagnostic test on the washer and it went through C0-C5 (the agitation step) and all worked great, until it wouldn't come out of C5 after at least 10 minutes and go thru C6-C8. I had to cancel the diagnostic test and hit the "drain and spin" button to get all of the water back out of the washer. BTW, the "drain and spin" seems to get the clothes a bit drier than when I have it run through the "normal" cycle with the "extra high" spin. If anyone has any other thoughts, I would really appreciate it. This unit is in a small space with the dryer attached so to take it out and do repairs is a pretty big hassle. It has had a new control board and two new fill valves in the 10+ years that I have owned it. Questions I have: 1.should I remove the entire drain pump to make sure there isn't anything lodged in it? 2. could it be the belt slipping slightly and keeping the spin from reaching its 1200 RPMs? 3. Anything else I may be missing???

Jan 17, 2017 | Kenmore Washing Machines

Washing Machines Logo

Related Topics:

1,040 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

63291 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...