At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
My Kenwood KDC-MP828 just stopped working. It worked fine coming home from work today. Got in my truck about 3 hours later to go to the gym and it is stuck on standby mode. If I put a CD in it will play then stop, then play, then stop. If I take it out it is stuck on standby. Got any ideas?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
it's a Canadian Kenwood. http://inform3.kenwoodusa.com/manuals/KDC-MPV8025.pdf
I had the 925 purchased from Ebay, but I sold the car with it.
it's probably the ribbon wire broken between the face and the unit. I know that on Ebay some they use to offer a repair for these type of units.
Today i brought a 98 ford and the dealer replaced the cassette player with a Kenwood KDC-MP6036 from a trade in they had. It was fine for 30 min approx then music stopped and "PROTECT" was displayed and now nothing works ???? what can i do
You must have the remote to clear the security code. If you do not have a remote, this will not work and there is no other way to clear the code. If you do not have a remote you must either buy one or borrow one from a freind who has a kenwood radio. Most all of the remotes for the last 5 to 8 years will work. If you can not get a remote, you can take the radio's to a authorized Kenwood service center and they can clear the code for a reasonable cost. My shop charges $25, that should be about what other shops charge.
This first one is for the KDC-MP528
1. When you are requested to enter the security code, while
pressing down on [AUTO] key, use a long-press on >>I key
for 3 seconds. (----disappears.)
2. Using the remote controller, input “KCAR.”
Press remote controller [5] key 2 times and then press >>I
key. (Input for “K.”)
Press remote controller [2] key 3 times and then press >>I
key. (Input for “C.”)
Press remote controller [2] key once and then press >>I
key. (Input for “A.”)
Press remote controller [7] key 2 times and then press >>I
key. (Input for “R.”)
3. The security is released and the unit enters the STANDBY
sourcing mode.
4. If a wrong code is input, the unit goes into the Code Request
mode.
Now this is for the KDC-MP828
1. While “– – – –” is being displayed, press [>>I ] key for at
least 3 seconds while pressing [AUTO] key.
This makes “– – – –” display disappear.
2. Using the remote controller, input “KCAR”.
Press remote controller [5] key 2 times (Input for “K”) and
then press [>>I ] key.
Press remote controller [2] key 3 times (Input for “C”) and
then press [>>I ] key.
Press remote controller [2] key once (Input for “A”) and then
press [>>I ] key.
Press remote controller [7] key 2 times (Input for “R”) and
then press [>>I ] key.
3. The security is released and the unit enters the STANDBY
mode.
4. If a wrong code is input, the unit goes into the Code Request
mode.
A rating of "FixYa!" would be appreciated for this free information.
i have had the same deck for four years and installed and removed from 4 different vehicles. the deck has been through some stuff lets put it that way. mine does the same thing as yours, i have found that you just keep ejecting the disk untill it reads. usually only takes a couple times and then mine works just fine.
×