Question about VCRs

1 Answer

Unlocking Jvc dvd/vcr

Feb 23

Hello!
I have a jvc dvd/vcr which plays only certain cd/dvds and does not play vhs tape. when connected the tape does not play. some audio is heard.when specific dvd is played i says it cannot play it as it does not support the region or something like that!Perhaps, both the mode need unlocking so that it plays all cd/dvd's. Pls help me.
Player-jvc model is hr-xvc7 runns on 120 volt.
T.V-Panasonic TC-29F J20CA(29" screen)
Thank You
Gopal.
gopals50@rediffmail.com.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Did it come from another country?

Posted on Feb 25, 2008


Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

8mm JVC tapes put into a VHS tape that will play on a combined TV and VCR. Please, please, I need your help! Found tapes from 15 years ago.


You need an 8mm player or the camera that recorded the tapes. Connect the video and audio from the 8mm player/camera to a VHS recorder. Put the 8mm on play and the VHS on record.

Jan 08, 2015 | JVC P-6120JDU Video Cassette, 8mm 120...

4 Answers

JVC HR S8000U S-VHS VCR switch from stereo to mono during playing.


try to do a player head cleaning. just be careful doing this..

thanks

Aug 04, 2008 | VCRs

1 Answer

Playback problem EP


Do you have a tracking control on the
vcr if you do it should be centered during
record It can be adjusted during playback
to clear up the picture adjust it for the best
picture

If you dont have a tracking control on the
vcr then it may require a mechanical adjustment
of the backtension or guidepost which requires
special tools to perform

Nov 18, 2007 | JVC HR-A592U S-VHS VCR

1 Answer

Why does the jvc hr-s3800u shut off after about 8 seconds of tape play


It could be a tape end sensor problem, take up reel is not working, or a idler assembly issue.

Mar 20, 2012 | JVC HR-S3600 VCR

1 Answer

JVC HR-S9500 S-VHS VCR. all functions work except the eject on the vcr. there is no eject on the remote.it plays, ff, rew, stops etc. I can't get the tape out.


the eject button is a plastic piece that turns and pushes down on the board and is more then likely broken open the vcr take off the front face plate and check the button, it will propaply fall out. you can use super glue and glue the button back in place

Jan 05, 2010 | JVC HR-S9500 S-VHS VCR

2 Answers

I have a JVC DR MV7SU DVD/Video recorder. How do


If your camcorder allows you to connect to a tv or vcr and allows you to record from it to the camcorder via the rca video input, then you should be able to record it that.  The camcorder must have the RCA audio/video inputs on it to be successful.

enov8

Mar 08, 2009 | JVC VCRs

2 Answers

Seinfeld DVD episodes won't play


It is probably not your VCR. If it is only the Seinfeld DVD's then the format that the production company wrote on those few episodes are incompatible with your vcr. I know I'm not solving your problem much, but don't go waste money on a brand new Vcr when not needed.

Nov 24, 2008 | JVC HR-VP650 VHS VCR

1 Answer

Too fast playback of video cassette


Hi,

Initially, I am inclined to think that nothing is wrong. It is just most likely that that particular tape was recorded in a different speed other than what your VCR is capable of playing. This is a form of compression wherein a longer recording/playing time is squeezed into the same type/kind of tape. The various settings are SP, LP, EP or even an XP. Pls click here to give you an idea of the recording time/speed at different settings.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information. Good luck and kind regards. Thank you for using FixYa.

Nov 09, 2008 | JVC HR-J461MS VHS VCR

1 Answer

JVC HR A62U VCR


I was wondering if you tryed unplugging vcr for an hour then
plugging it back up. sometimes this resits it and it will work fine.
the tape might eject itself out or eject button might work.

Nov 10, 2007 | JVC HR-A32 VHS VCR

1 Answer

Picture distrub and audio noisy


Not all tracking is created equal, and this is a classic example of what you want to do in the future. Make sure that the tape you want to play back in the secondary machine has been recorded originally in the "SP" mode. "EP mode sometimes has too much crosstalk to effectively play in other machines without the more closely spaced tracks interferring with each other. Hop this helps...Accordianman

Apr 10, 2007 | JVC HR-DVS1 Mini DV/S-VHS VCR

Not finding what you are looking for?
VCRs Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top VCRs Experts

 Grubhead
Grubhead

Level 3 Expert

4584 Answers

alexander woolfolk
alexander woolfolk

Level 2 Expert

276 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a VCR Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...