Question about Heaters

1 Answer

Heating pad I recently purchased a heating pad made by Sunbeam and now it does'nt work.If it helps, i bought it at Zellers in Surre, B.C. Canada

Posted by on

  • dragonwinks Feb 23, 2008

    that's supposed to say Surrey,B.C. Canada

×

1 Answer

There are no repairs done on Sunbeam heating pads. If it is less than a year old either take it back where you purchased it or contact Sunbeam.

Posted on Feb 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sunbeam Heating Pad


You can try to order a replacement through the company you originally bought the set from. If it is fairly new, the warranty may still be in effect. My sister goes through http://www.pioneercomfort.com and has had good results, you could try there.

Jan 17, 2014 | Sunbeam Heaters

1 Answer

I need instructions on operating a remote to Sunbeam,Cal-King, electric mattress pad.


Which model Sunbeam mattress pad do you have? Sunbeam has some of their manuals here: http://www.sunbeam.com/manuals.aspx . The electric bedding share a manual. The direct link is http://www.sunbeam.com/BeddingManuals/SunbeamBedding/Universal.pdf .Make sure that you are using the master control for your side of the bed (that's the one closest to the plug for the wall outlet).

You may need to turn on the second control and set it to 0 at night. If you still are having a problem with the heat being uneven, you might need a replacement mattress pad. I know we've replaced several electric blankets or mattress pads due to problems with the control/uneven heat.

I hope this helps.

Cindy Wells

Jan 25, 2012 | Heaters

1 Answer

Instruction manual for sunbeam model 809 heating pad


Hi, you should be able to get the manual here:

http://manualfox.com/link/sunbeam.htm

Dec 05, 2011 | Sunbeam 805810 HeatSense Heating Pad...

1 Answer

Greetings, I purchased a full size heated mattress pad with a single off-hi-lo-off control switch several decades ago and the fabric covering the heater elements has deteriorated thus exposing the...


I don;t think there is any repair that is possible and you will need to replace your mattress pad. I would recommend you contact sunbeam directly at sunbeam.com and see if this model has a lifetime guarentee.I tried but they wanted to know how old it was and other info that I could not provide.
If you have had this good of service from their product then I would let them know and maybe they will work with you.
I have had good results contacting companies and praising their products and it don't cost much to try. Thank you

Jan 16, 2011 | Sunbeam Heaters

1 Answer

Have heating pad model 818-7. blinking red light for high when connected- but no heat. what to do. I love this soft, terry cloth hour glass heating pad controller model number: SW204. e12107 is also on...


I had this problem with a heating pad too. I tried turning it off, unplugging it, then plug it back in and see if the light is still blinking. If it's not, set it to the temp you want. My heating pad was very temperamental that way, it didn't want to be set before it was plugged in. I hope this works for you.

Dec 16, 2009 | Sunbeam 805810 HeatSense Heating Pad...

15 Answers

New heating pad not working


have same problem with heating pad . reset control by unplugging unit for 1 minute , while holding down power button plugged unit back in . sometimes this takes 3 or 4 tries.

Apr 26, 2008 | Sunbeam 805810 HeatSense Heating Pad...

4 Answers

Malfunction heating pad


Same F2, quick off problem here. Then I noticed that the gray plug on the power cord was not completely flush with the connector on the pad. I shoved them together until there is no gap. The unit's worked perfectly since then.

Mar 24, 2008 | Sunbeam 805810 HeatSense Heating Pad...

8 Answers

Sunbeam Heating pad will not reset


I have a Sunbeam heating pad with the SW204 controller that the High light blinks when it is plugged in. I called Sunbeam and the first thing they said is it cannot be plugged into a surge protector. Next, to reset it unplug it from the wall, then unplug the controller from the heating pad. Wait 30 seconds, then plug the controller back into the heating pad and then into the wall. It did the trick. However, when I move it to the bedroom plug it does the same blinking. Sunbeam is sending me a replacement heating pad. They appear to be very good with Customer Service since it is more than a year old.

Mar 21, 2008 | Heaters

Not finding what you are looking for?
Heaters Logo

Related Topics:

539 people viewed this question

Ask a Question

Usually answered in minutes!

Top Heaters Experts

paulcarew

Level 3 Expert

1899 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Mack Baxter

Level 3 Expert

379 Answers

Are you a Heater Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...