Question about Modems

2 Answers

How to know the username password

HI,
I recently got DSL installed at my home

the person that installed it savd the username n password in the modem configuration so that I don't have to give it evrytime.

now I have forgotten the password n username. How can I access the modem configuration n kow the username ?
the modem is
Paradyne ADSL2+/ReachDSL Enhanced DSL CPE 6381 - Bridge/router - DSL - EN, Fast EN

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 67 Answers

Connect your computer to it

go to start->run and type "cmd", press enter

type "ipconfig"

look for "default gateway..." and note the ip address(ie http://192.168.1.1)

go to your browser and type
http://192.168.1.1:8080

if that doesn't work..type
http://192.168.1.1

you can always call your isp technical support and ask them for it.

Posted on Feb 23, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 65 Answers

Please contact your ISP for username and PW.

Posted on Feb 23, 2008


Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

High


how can put ?
username,password ?

May 29, 2010 | Zyxel U 336S Modem

1 Answer

Need username and pwd


To access the configuration: The default user is 'Administrator' and the password is blank.

Make sure you have your DSL username and password to log into you DSL service. If you don't have it your service provider can give it to you.

If that doesn't work find the reset button on the back. Do not use the front reset. Hold the reset buttion in until the power led flashes red. This should reset the unit back to factory. You will need probably need you DSL username and password to re-configure the router.

Mar 06, 2010 | Thomson RCA DCM245R Modem

1 Answer

I clean up my pc and now im trying to install the westell and i dont know how


You will need your username and password to configure your DSL. The easiest way is to contact your ISP heldesk and have them reprovison your modem.

Jun 20, 2009 | AT&T High Speed DSL Modem

1 Answer

1st time installation: cannot set up the modem properly


If the internet light is red it indicates that there is an error with the username and password
Check the username and password provided by your ISP
If still unable to connect reset the modem and then reconfigure it with the username and password and choose PPPoE connection type.
If still no success contact AT&T tech support to reset the password

Jan 14, 2009 | AT&T High Speed DSL Modem

2 Answers

I have an AT&T Modem; having trouble with internet connectivity


It is OK to keep putting the UN and PW in. However you shouldn't have to. I suggest having a tech come to your home and have them do a signal test both at your jack and outside with your home unplugged from your service box. If there is a big difference in the numbers then you're simply loosing signal due to signal bleed inside. This is a simple fix. Have them isolate some wires in your jack and place a DSL filter outside. Then your DSL signal will go straight to your modem and not bounce all over your home. This will NOT affect your phone.

Dec 31, 2008 | AT&T High Speed DSL Modem

2 Answers

Modem settings for Siemens SL2_141


First of all check whether dsl yellow light is on or not.
if it is not on then contact bsnl local branch.
otherwise
remove dsl line from modem.
Then
open internet explorer
type http://192.168.1.1
username= admin
password= admin
click WAN
edit pppoe 0_35_1
connection type=bridging
encapusulating =LLC/Snap-bridge
next
again next
save
save/reboot
close IExplorer
connect DSL line.

if its work plz reply me
findme_rohit@yahoo.co.in

Sep 14, 2008 | Modems

1 Answer

DSL light flashing constantly


Hi,

I had the same problem to begin with. Here is what the Zoom helpdesk suggested:
"To force the dsl light to stop blinking, please follow these steps.

1) Open up your web browser and type 10.0.0.2 in the address bar. Type in the the username and password to log in to the modem.
username: admin
password: zoomadsl

2) When you get to the address bar, Click on advance setup.

3) Click on ADSL Configuration.

4) Change the standard to G.Dmt and change the activate line to Start.

5) Save changes and then write settings to flash.

Within a 1 or 2 minutes, the dsl light should go solid."

This worked for me. Good luck.

Mar 24, 2008 | Zoom X6 (5590) DSL Modem (55900003)

1 Answer

About seeting of dsl modem


usually it's this one from browser.

192.168.0.1

then enter the password and admin..and then set it up, and then go online to their site.

got backup?

Feb 18, 2008 | D-Link DSL 302G (DSL-302G) Modem

Not finding what you are looking for?
Modems Logo

Related Topics:

1,306 people viewed this question

Ask a Question

Usually answered in minutes!

Top Modems Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Are you a Modem Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...