Question about NetGear MR814 Wireless Router

1 Answer

Locking my router so only Household usage

I purchased th router 3 years ago so I no longer have the software. I need to know where to go in the computer to find the router to lock it.

Posted by on

  • Anonymous Jun 14, 2008

    need to lock so my house only use

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 60 Answers

Usualy small home routers are managed using a web interface, so there is not need for a special software. I say "usualy" because you did not specify the brand and model of your router, so I am assuming that you router behaves like the others.

First, you will need to find the IP address of your router. In order to do that, in Windows XP, click Start > Run and type "cmd". On the command line, type "ipconfig". Look at the "Default gateway" line, this should be the IP address for your router.

Then open a web browser such as Internet Explorer and type that IP address in the address bar. The web interface should open. It may ask you for a username and password. The username is usualy "admin" but the default password may differ from one manufacturer to another. Try leaving the password field empty. If it does not work try "admin" also as the password.
If it still does not work, having the brand and model of your router will be necessary to find the default password.

Everything should be explained in more details in the user manual of your router, if you still have it. It you don't, it may usualy be downloaded from the manufacturer support web site.

Posted on Feb 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

PC purchased last year had Norton installed. A few days ago Norton expired and ever since my wireless router no longer sends WiFi signals, WLAN light is out. How can I turn this feature back on? I've...


1.Router got a reset button in the bottom.Reset your router.Hope it will wok for you.
or

2.UNINSTALL THE WIFI ROUTER AND INSTALL IT.

3.CHECK YOUR POWER CORD TO ROUTER.

Feb 01, 2011 | Linksys Wireless-G WRT54G Router

1 Answer

We have been using the zyxel G 4100 v2 for 3 years. Last week we found out that we could no longer use our web based password to monitor our accounts. Did someone hack our system. How can we recover our...


Just reset it! At the back of the router is a small hole with th word "RESET".With a toothpick or some like press gently for 30 seconds and wait for the router to start up again.Log in to http://192.xxx.xxx and start a new configuration.

Jan 01, 2011 | Zyxel G-4100 v2 WirelessHot-Spot Gateway -...

1 Answer

Hi I ca you help i cant remember my WEP key


No, there's only 3 ways to sort this problem out.

1. Someone else who knows it tells you.

2. Use a pc/laptop with cracking software like aircrack, but last time I heard it was linux only, would be legal if you own the network (I assume, don't know worldwide laws), but it could takes weeks (longer for WPA, which is what you should be using as WEP isn't very secure) and is very complicated I think.

3. Reset the router. You'll need a pencil or similar.

If there isn't anyone else who knows your key then reset the router, by holding the reset button (small recessed rubber button usually on the back) for 30 secs (could be less) and setup your router again.

Nov 26, 2010 | NetGear DG834G Router

1 Answer

I am using a Belkin Wireless G Plus Router connected to my Virgin cable. I have had no problems with the router for 3 years however in the last month it stops working. To reconnect it needs powered off and...


From your explanation what i got is the router is not working and needs to be rebooted to start working. There is no changes done into the configuration.

In this case i suspect some software bug in the router.
I will recomend to backup your configuration and then reset once the router.
Remember if you reset the router the router will go to factory default settings and will loose all the configuration. you need to reconfigure that from the configuration backup you have taken recently.

Oct 31, 2010 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

I need a password for my router purchased it about 3 yrs ago from Harvey Norman Marion South Australia the model is 802.11g 54mbps 2.4ghz wireless number on back is F5D76334 until now it hasn't been a...


WIRELESS SECURITY ISSUES

Step 1 : Connect Router - Computer ( Wired)

Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3 : On the left under wireless click wi - fi protected setup

Step 4 : Leave the password blank and click on submit

Step 5 : Disable it and Click on apply changes

Step 6 : On the left under wireless click Security

Step 7 : Enable 64 Bit WEP

Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )

Step 9 : Click apply changes

Step 10 : on the left under wireless click channel and SSID

Step 11 :Change the Wireless channel to 6

Step 12 : Change the SSID to a different name ( no Spaces )

Step 13 : Click apply changes

Step 14 : Now Scan and connect to this network ( Wireless )

Let me know if it works

Oct 18, 2010 | Belkin (F5D7230-4) Router (587009)

1 Answer

We purchased a D-Links Air Plus Xtreme G Wireless Router years ago. It worked fine up until 2 years ago when my husband disconnected something. I'm not sure what he did, but would like to set it up again....


You can download the manual for your router and follow instructions from there.
You will need to browse to the dlink website - www.dlink.com - and from there navigate to the "find your product" link. From there you can find all the details for your specific modem.

Apr 05, 2010 | D-Link DI 514 Wireless Router (DI-514)

1 Answer

My personal network which i set up about 6 months ago when i purchased this router, will no longer allow me access to the internet. I can however gain access when i switch to other available networks


Connect to the web-interface of the router, and click "reset to factory settings". Then, run the "Wireless Network Setup Wizard" to recreate your personal wireless network.

Nov 06, 2009 | Linksys WRT160N Wireless Router

1 Answer

My router apparently needs to be reset/reconfigured i need help??


You may reset the router set the router back to factory default. Username is blank and password will be admin..

Jul 01, 2009 | Linksys WRT54GC Wireless Router

1 Answer

I cannot connect a new lap top to our wireless router


There's no special settings actually in adding another notebook to your wireless network. You can add up to 32 wireless clients on your wireless network. You will see a wireless network icon at the system tray by the clock, just click that and you will see the list of available networks. Choose your network and click connect. That should do it.

Nov 30, 2008 | Linksys Wireless-G Broadband Router

1 Answer

Need software


Hello, you will find your driver here:

http://members.driverguide.com/driver/detail.php?driverid=432573

But you have to register on the site (it's free)

Have a great day!
Pablo :-)

Oct 19, 2008 | Blitzz Technology (BWA611) Router

Not finding what you are looking for?
NetGear MR814 Wireless Router Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Routers Experts

Barry37

Level 1 Expert

31 Answers

MrNutsy

Level 1 Expert

36 Answers

Phillip Whisenant
Phillip Whisenant

Level 2 Expert

120 Answers

Are you a NetGear Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...