Question about Motorola Mobility DRC800 Universal Remote Control

6 Answers

Remote Control Code for Motorola Cable Box

I purchased the innovage universal remote, and need the remote code for a motorola cable box.

Posted by on

  • johnjosephjr Feb 24, 2008

    We have the same problem as LinnyLoo - as we have an Innovage Universal Remote and need the remote code for a motorola cable box.  We called Armstrong (Cable provider) and the code they gave did not work.  We tried the steps in the Operating Manual to find the code but have not been successful.  Thanks for any help.  onebubba@zoominternet.net



×

6 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have a Motorola cable box and used code # 051. Works great. Can't find a code for DIGISTAR tv though. If anyone has one, shoot it to me at deannescollard@hotmail.com.

Posted on Jun 15, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

With my Motorola /Comcast cable box and Innovage giant remote, 049 works.

Posted on Jun 30, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have a r.c.a. universal remote and i need the code number for a at

Posted on Oct 16, 2010

I called my cable provider ( Mediacom - Delaware ) for the cable box code to be used with the Innovage Jumbo Universal Remote. The cable box in question is the Motorola DCT2524. Although I haven't yet had a chance to try them, they are 001 and 112. They also gave me a web site to check. www.mediacomtoday.com Good Luck.

Posted on May 29, 2008

Where is the closed caption button on this thing?

Posted on Mar 08, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

It is 110 and it work perfectly 4 me

Posted on May 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

RCRP05B RCA Universal Remote


click "codes list" to download the pdf for the 4 and 5 device remote code list, this is asuming you have either the 4 or 5 device remote however.

Feb 20, 2014 | Innovage Jumbo Remote Control

2 Answers

Innovage products jumbo universal remote - cable box code


eea1286.jpg
Did you try the above method frim the manual

Dec 26, 2007 | Televison & Video

1 Answer

Need code to program my remote control


I have the RCRP05B RCA Universal Remote and need the code for my SuddenLink Cable/DVR box which is a Motorola DCT6416 iii.

Jun 19, 2010 | Innovage Jumbo Remote Control

2 Answers

I have innovage jumbo remote. Lost codes. Need for sharp tv and motorola cable box


http://www.remotecodelist.com/remotes/innovage/Jumbo_Universal_Remote.pdf

here you go.

Dec 07, 2009 | Innovage Jumbo Remote Control

1 Answer

Through Amazon a Brookstone's "Jumbo Universal Remote" was delivered - there is no identification of who manufactures this remote. We need to have it control an AT&T-California cable box which was...


I happen to be a Jumbo Universal remote Expert here at Fixya, so I hope I can help. It is possible that this remote just won't run your Motorola cable box, but I wouldn't give up until I had tried the codes from the list in the manual, as well as run through the auto-setup feature of the remote for CBL and for SAT, where it just tries all the cable box codes one at a time.

I was able to find a working motorola codes for an Innovage Jumbo Remote, a three digit code remote you might as well try: 051.

You have probably tried the codes for Motorola (031) and GI (000, 032) from the manual using these steps:

1. Turn on the device with which you want to use the remote control.
2. Locate a 3-digit code for your device. (000, 031 & 032 for example)
3. Press and hold the corresponding button on the remote control
(CBL) for approximately three seconds. The POWER INDICATOR illuminates.
4. Enter the 3-digit code for your device within 30 seconds. The POWER INDICATOR shuts off.
5. Press the ON /OFF button to verify correct code entry. If the device shuts off, the code was entered correctly. If the device does not shut off, repeat steps 3-4, using a different code located on the Code List.

If those are still a bust, try the GI SAT codes 018 & 019.

Have you tried the following steps with both CBL and then SAT to search it's database?

1. Turn on the device with which you want to use the remote control.
2. Press and hold the corresponding button on the remote control
(SAT or CBL) until the POWER INDICATOR on the remote control illuminates. The remote control is in programming mode.
3. Press and release ON /OFF. The POWER INDICATOR on the remote control flashes once and stays on indicating the unit is in Power Scan mode.
4. Press CHANNEL UP or CHANNEL DOWN repeatedly until the device turns off.
5. When the device turns off, press any key to store the code.
6. Press any other button. If the device responds, the remote control has been programmed. If the device does not respond, repeat steps 2-5.

I hope that helps.

Oct 26, 2009 | Televison & Video

2 Answers

Need code-Innovage Jumbo remote for Motorola cable box & GE tv


The codes for a GE TV are: 000, 021, 053, 063, 115, 117, 120 & 134.

To program your remote by entering a code, follow these steps:

  1. Turn on your TV.
  2. Press and hold the CODE SEARCH button for at least 3 seconds until the red LED lights up and stays lit.
  3. Press the TV button on the remote so that the LED blinks once and then remains solid red.
  4. Enter the first set of 3-digit codes from the list. The LED will blink once every keypress. After the 3rd digit, the red LED will turn off indicating that the code was recognized for the device. If the code was not compatible, the LED will flash several times and you need to return to step 2 to try that code again or to try the next code in the list.
  5. After the LED has turned off, aim the remote at the TV and press ON/OFF. If the device turns off, you have used the correct code and the remote was successfully programed. If the device does not power off, return to step 2 and try again with the next code in the list.
To find the right code for the Motorola box, I recommend auto-searching through the CABLE and SAT code lists.

To have the remote try each CABLE or SAT code it knows one at a time, follow these steps:
  1. Turn on your cable box.
  2. Press and hold the CODE SEARCH button for at least 3 seconds until the red LED lights up and stays lit.
  3. Press the CABLE or SAT button on the remote so that the LED blinks once and then remains solid red.
  4. Press the ON/OFF button slowly and repeatedly until the cable box turns off. The LED will blink once each time you press the ON/OFF button.
  5. Once the cable box turns off, press the ENTER button to store the code and the LED will turn off.
I hope that helps.

Jul 18, 2009 | Innovage Jumbo Remote Control

1 Answer

I need codes for my cable box its a moterola cable box from shaw in winnipeg manitoba my name is justin ledoux could you send me some codes pleaz


Sorry it took so long to respond to your request for assistance.[Motorola... 5000, 5002, 5003, 5028] These are the listed codes for your remote control to use with a Motorola cable box. I hope this information solves your problem, of needing the codes to use with the remote control and you Motorola cable box. Thank you for using FixYa and have a nice day!

Feb 10, 2009 | RCA 3-Device Universal Remote with...

2 Answers

Remote code list


JVC DVD 0558 0623
Motorola Cable 0476 1106 0276 0810

Mar 06, 2008 | JVC RM-C18G-1H Remote Control

4 Answers

Find Code for Motorola Cable Box which Works for the Innovage Jumbo Remote Control


Had the same problem with my Jumbo Remote - found the code under the "General Instruments" list (051 for me). Also noticed that my cable box has a sticker on the front with a serial number starting with "GI," most likely more evidence of the General Instruments conection. Able to get all the functions to work: guide, menu, etc. Good luck!! - JQ

Dec 21, 2007 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

24,920 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Mobility Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72640 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

70374 Answers

Are you a Motorola Mobility Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...