Question about JVC KD-G421 CD Player

2 Answers

JVC Daisy Chain

Hi guys. I recently bought a JVC autochanger, to go with my jvc head unit (g421). Now the guy at JVC told me i'd be able to daisy chain all this with my JVC iPod connector. Is this possible and if yes, HOW?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 578 Answers

All ipod can play with any stereo my fried dont have to be jvc you have to find an installer who know how to input that you to you work with your head unit, the make is the lease of your head ace you need a well experience installer who can do for you ,and it can bedone with just and fm modulator

Posted on Aug 07, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 43 Answers

If your autochanger has an input as well as an output connector it will be possible. The iPod adapter would have to be plugged into the changer's input, and the changer's output cable would run to the KD-G421.

This manual here from JVC shows a diagram on the middle of page 1 where an i-Pod adapter (I'm assuming you have the KS-PD100) is connected daisy-chained with an XM tuner or a DLP unit. Although it doesn't explicitly say that it would work with a CD changer, I don't think it'll be a problem as long as you have an input on the changer.

Posted on Feb 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hey guys, I've just installed a CD changer in my car - having some difficulties getting it to work. After some Googling I came across this forum so I figured I'd see if any of you guys know where I'm...


there should be a small connector on the changer itself for the power ground and remote wire for power to the changer unit. the cord coming from the unit to the changer doesn't supply this power and this is why it wont eject and also your head unit wont recognize it until it gets powered up and able to communicate with the head unit and then it will show up as a selectable source when switching between sources of music. check the back of the changer for a small connector containing 3 or 4 pins and you should have a connector with the corresponding wires coming from it to plug into this spot after connecting the wires properly. if you bought it on ebay it is possible you didn't get this piece which is critical when connecting this changer.

Apr 03, 2011 | JVC CH-X1500 12-Disc CD Changer

1 Answer

I have a program set to strobe all four of my slim pars at once. The two on the right are not strobing but the two on the left are. I have my dmx input running in from the right daisy chaining to the...


Among other things to check is using a terminating resistor at the end of the chain if the chain runs a distance. Read "DMX termination"

Swap the units to verify each is OK or re-route the daisy chain..

Feb 23, 2011 | Chauvet SLIM PAR 64 LED Par Can

1 Answer

I recently bought a Korg Pitchblack Tuner. It tunes correctly, (maybe a little slower than my Boss) but it will not power other pedals with the daisy chain. I am using a standard Boss wall wart which...


The tuner uses around 500 ma which may be nearly all your wall wart can put out... DO NOT overload the power adapter by daisy chaining other pedal power loads on it.

Feb 08, 2011 | Korg pitchblack + Tuner

2 Answers

JVC KW-NX 7000, the spring loaded latch for the detachable face is broken so the face plate will not stay on therefore I cannot use my unit. Can I buy a new latch for this and if so where or do I have to...


If you still need help on the display faceplate, check this guy on ebay, he has all the jvc parts, I bought my faceplate touch screen from him, his user id is genecyrus on ebay NAU0005-001X

Oct 18, 2010 | JVC KW-NX7000 Car GPS Receiver

1 Answer

I have 2 Daisy air rifles. One is a very common lever action BB model 102. The other is 45+ years old, a break-barrel .177 cal pellet single shot, "made for Daisy in Scotland D 220 R" inscribed on...


i cant help you with a canadian source but i can with a british one try..
T W CHAMBERS & Co,,,e.mail,,sales@gunspares.co,uk
if this guy dont have what you need il eat my hat after you have done some thing nasty in it???

Jul 14, 2010 | Daisy Toys

1 Answer

Unable to set the clock on jvc kd g421 car stereo. Any suggestions?


Press and hold SEL until menu appears
Using the scan button (FWD/REV), select Clock H
Using the volume knob, set the value
Using the scan button (FWD/REV), select Clock M
Using the volume knob, set the value
Press SEL to save and exit

Jan 14, 2010 | JVC KD-G421 CD Player

1 Answer

Always jumps, this head has been replaced many times byKia. (in my Kia sportage!) Starting to lose faith now.


if you having that problem more than once change the head unit to a different brand some of those unit use by kia all ways do that i have change a few for some customer my self '' get one of the poineer o9 model unit and get properly in stall

Aug 07, 2009 | JVC KD-G421 CD Player

1 Answer

Jvc cd reciever model number kd-g421


Here you go mate. http://www.online-caraudio.co.uk/ishop/1126/shopscr564.html

£75.00 gets you a new face!

cheers,
thom

Jan 22, 2008 | JVC KD-G421 CD Player

1 Answer

KD-G421 in Vectra Envoy 99


To stop the memory loss you need to swap the red and yellow wires around. (battery power and ignition power).

To stop the date loss, you need to cut the electrical ariel/remote blue wire.

Dec 27, 2007 | JVC KD-G421 CD Player

Not finding what you are looking for?
JVC KD-G421 CD Player Logo

Related Topics:

308 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Car Audio & Video Experts

Radames Pagan
Radames Pagan

Level 3 Expert

196 Answers

kakima

Level 3 Expert

102366 Answers

xxxxxx xxx

Level 3 Expert

4807 Answers

Are you a JVC Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...