Question about iLO (2 GB) MP3 Player

2 Answers

Ilo mp3 player

When i try to turn on my mp3 it flashes on and off

Posted by on

  • 6 more comments 
  • vegas476 Mar 03, 2008

    My MP 3 player flashes when I turn it on and then it cuts itself off. Would you please help me with this problem?

  • jr howard Mar 03, 2008

    says incorrect format

  • Red79 Mar 03, 2008

    My MP3 Player works solely off of the computer through the usb port. It does not power up.

  • Anonymous Mar 05, 2008

    it flashes on and off

  • blag-diva Mar 06, 2008

    when

  • djl8329 Mar 06, 2008

    my ilo mp3 player is blinking off and on. I disconnect from my computer and thats when it started to blink off and on.

  • voodoochile Mar 07, 2008

    ilo screen blinks on and off,wont play music

  • donna mcgill May 11, 2010

    hi.. will your pc recognize it? it sounds like a power issue, is your charger working? what type and model are you using

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 121 Answers

Looks like you resolved your issue? if that didnt work, try your reset button as well.. good luck..d

Posted on Feb 26, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 44 Answers

Plug it in and take it out or hold down the play button

Posted on Feb 23, 2008

6 Suggested Answers

SOURCE: ILO MP3 PLAYER WON'T TURN ON

I just bought mine and put the battery in it that came with it.. Didn't turn on, no buttons are stuck etc. Tried 9 different batteries.. It came on for a min. long enough to load 20 songs on it.. But still nothing.. Help? I more than likely need to take it back to walmart where i bought it..

Posted on Jan 24, 2007

  • 1 Answer

SOURCE: MP3 ilo

I have MP3 player NEXX NF-810 and after formatting when I turn it on, there was massege - "flash error please backup the data and format the player" and when I plug the USB cable into PC, everything in my PC system is stoped and I could not do anything. Please help me

Posted on Oct 06, 2007

Teckies
  • 226 Answers

SOURCE: ilo mp3 player model MP-556

connect your mp3 to the computer then right click on the drive click format. after that you mp3 is now good as new.

Posted on Jan 21, 2008

ThaMp3Doctor
  • 8596 Answers

SOURCE: ILO MP3 player shows "flash

There are two ways to format an Mp3 player - one on the computer itself, and one in Windows Media Player. Both methods will end up erasing all the songs on the player, but the player will be "good as new" after that. Sometimes reformatting in this manner will override the player's native formatting and cause problems - this can be reversed in most cases by updating the player's firmware. Firmware upgrades are available from most manufacturers' websites.

WARNING: The following procedures will erase all songs on the player.

Check if the file system is NTFS. If yes, format it to FAT or FAT32. - Connect player to computer, double-click my computer, right click on icon of mp3 player and select format. This only applies to Windows-based computers.
You can also format the player in Windows Media Player itself:
Connect your Mp3 player to the computer and open Windows Media Player. Click on the Sync tab. Pull down the drop down menu underneath the Sync tab by moving your cursor over the Sync tab and left clicking on the little black arrow underneath the Sync tab. Highlight "name of Mp3 player here 1GB" (wording may vary slightly), and then select "Format." - this should erase everything.
-Tha Mp3 Doctor

Posted on Jul 08, 2008

  • 1 Answer

SOURCE: i was wondering if i could contact ilo for problems with my ilo mp3 player

I am planig to register NGO For civil rights need contact

Posted on Dec 06, 2008

ThaMp3Doctor
  • 8596 Answers

SOURCE: ILO MP-556 MP3/WMA player

Revised iLo instructions for Windows Media Player 11:
Connect the iLo to the computer
In Windows Media Player 11, Run the mouse over the Sync tab
Click the little black arrow that appears underneath the Sync tab
Select More Options
Click the Devices Tab
Highlight the iLo
Click Properties
Uncheck box, "Create Folder Hierarchy on Device"
Download the firmware file at: https://system.netsuite.com/core/media/media.nl?id=16076&c=432868&h=b25618a8ea7ead5c9573&_xt=.zip
then proceed with the rest of the directions
-Tha Mp3 Doctor

iLO Mp3 Player
"Flash Error"
1. Connect the player to the PC using the USB cable. 2. Open Windows Media Player. 3. Go to the Sync or Devices tab and delete all content from the player. 4. Go to the Tools menu and select Options. 5. Select the Devices tab, highlight the ILO or Siren player and click on Properties. 6. Uncheck the box "Create Folder Hierarchy on Device" ---- "Firmware Upgrade" (provided by jwmgotee):
I just repaired/reformatted my 1.0 GB Ilo following the instructions below with no problems:
Please connect the player to a rear USB port on the computer. The display should show “USB Connectedâ€
. (If not, please press the power button.) Please make sure that all unused programs and applications are closed. You can close the applications by closing as many of the icons in the lower right hand corner (by the clock) as possible. Download the correct Firmware Click here (https://system.netsuite.com/core/media/media.nl?id=16076&c=432868&h=b25618a8ea7ead5c9573&_xt=.zip) to download the ILO 116 Firmware Click Open to initiate the download Double click on the ILO or Siren folder icon. There will be 14 icons. There will be a Setup icon that looks like a box with a blue line on it; please double click on this. Then click Run - this will open the Install Wizard. The Install Wizard has the instructions on the screen as you go through it. Once the firmware has installed, please click the Start menu, then Programs. Look for the icon that says ILO or Siren, and then double click the Firmware Update to install to the player. Depending on how severe the corruption to the firmware on the player is, you might have to do this step 2 or 3 times in order for it to completely repair the firmware. It will now search for the ilo. This may take a while depending on how corrupted the firmware is, so be patient.
After it has found the ilo, it will say, "A device has been detected in recovery mode and is being initialized. Please wait."
The ilo should come back to life and start showing it's glorious "USB Connected" screen.
The "Firmware Update" window should appear. Select "Format Data Area" to rid the player of corrupted firmware data. And click "Start".
It can take anywhere from 2 to 4 minutes to re-flash the ilo and the program might appear to have locked up, but it hasn't. So don't close the program or disconnect the ilo!
If the program fails to find the ilo and gives you an error like, "Device Timeout" or something similar, you need to reinstall the ilo drivers. This can be done by inserting the ilo cable into a USB port it has never been plugged into before. Or you can reinstall the drivers by reinstalling the Rave-MP program. (Remove it, restart the computer, and then install it again).
Although, plugging it into a new USB port is the fastest and easiest option.
If your player won't even turn on, follow these instructions first and then those above:
First, remove the battery. While this isn't necessary to get the player into recovery mode, it insures the unit will not power on before the cable is inserted.
On the ilo, hold the "Power" button down while inserting the USB cable. Continue holding the power button down for 5 seconds more after the cable is inserted. The backlight on the ilo will remain off during this time, making the screen appear to be blank.
An hourglass should appear on your computer and Windows should say,
"Found new Hardware 'SMTP3500".

Posted on Jan 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Ilo 2 GB Flash mp3 Stuck on ilo screen.


link your USB port between Computer and ILO player.
1.Click on START at lower left corner on you computer. choose "Explore"
2.look for ILO driver on start manu on left hand side. left click one on it. right hand click you will see the drop down options
3. Choose "Format" BESURE that you are going to format ILO NOT your hard drive. it will ask you again that you really want to format it. "yes"
4. copy new mp3 files to ILO. That will be finished. you can start playing it again.

Hope this help.
Pin

Jul 13, 2009 | iLO (2 GB) MP3 Player

1 Answer

Flash Error!


iLO Mp3 Player

"Flash Error"

1. Connect the player to the PC using the USB cable.
2. Open Windows Media Player.
3. Go to the Sync or Devices tab and delete all content from the player.
4. Go to the Tools menu and select Options.
5. Select the Devices tab, highlight the ILO or Siren player and click on Properties.
6. Uncheck the box "Create Folder Hierarchy on Device"


-Tha Mp3 Doctor

Sep 27, 2008 | iLO (2 GB) MP3 Player

2 Answers

ILO 2GB MP3 Player


reformat it using itunes software

Sep 10, 2008 | iLO (2 GB) MP3 Player

1 Answer

It wont turn on it justskeep flashing ilo


try connecting it to your comp or any other charging device, then turn it on-off

Jun 18, 2008 | iLO (2 GB) MP3 Player

2 Answers

Won't turn on


Reset the player first. If that fails:
Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.
-Tha Mp3 Doctor

Jun 12, 2008 | iLO (2 GB) MP3 Player

2 Answers

My ilo mp3 player comes on but flashes ilo over and over will not do anything else


Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.

May 25, 2008 | iLO (2 GB) MP3 Player

2 Answers

Ilo MP3 Flashes


Try holding the play button, or maybe you should replace it with a better one.

Mar 21, 2008 | iLO (2 GB) MP3 Player

1 Answer

ILO mp3 player


Disconnect from computer, turn it off, hold in volume + button and reconnect it to your computer - continue holding volume + untilt eh Found Hardware Wizard comes up

Mar 19, 2008 | iLO (2 GB) MP3 Player

2 Answers

Won't turn on correctly-flashes on and off


My ilo will not turn on! I've tried changing the battery - but no luck.

Feb 20, 2008 | iLO (2 GB) MP3 Player

1 Answer

Ilo mp3 player won't turn on


Do you have music on it? Maybe its playing something, and it just turned off the screen.

Aug 25, 2007 | iLO (2 GB) MP3 Player

Not finding what you are looking for?
iLO (2 GB) MP3 Player Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top iLO MP3 & Digital Media Players Experts

laikexpert
laikexpert

Level 3 Expert

281 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

kakima

Level 3 Expert

96627 Answers

Are you an iLO MP3 and Digital Media Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...