Question about Bosch SHU4006 Dishwasher

1 Answer

Bosch shu4006uc dishwasher timer problem

Hi. I have a Bosch shu4006uc dishwasher. The timer is not going through an entire cycle.
It usually gets stuck 1/2 way between start and wash. Thus, the washer will continue to "wash" until it is shutoff or the timer is manually turned. Thank you for any assistance you can give me.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 457 Answers

REPLACE YOUR MODULE. IM A OLD BOSCH TECH. POST 4 THUMBS FOR THE INFO THANKS

Posted on Feb 28, 2010

  • Bao Truong Apr 19, 2014

    Replace the thermostat. I had this same problem and it turned out to be a bad thermostat.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bosch dishwasher model 6800 has timer irregularities


Don't have an answer, but am experiencing the same problem.
I had to rebuild the control unit of our Bosch Excell Dishwasher. Replaced a blown relay on the CPU.
Dishwasher seems to now work fine - i.e. fixed the lack of heating problem, but it still tells me the cycle will take 74 mins instead of the usual 32mins. The cycle then actally takes more like 35mins to complete.
Any help much appreciated.

Jan 05, 2011 | Bosch Dishwashers

1 Answer

Dishwasher stalls


If the cycle doesn't complete, check these:

Water-heating cycle
Timer
Water-heating cycle Many dishwashers heat the wash and/or rinse water to a higher temperature, as the cycle calls for it. In these cycles, the dishwasher pauses after it has filled with water, waiting for the water to reach the pre-set temperature. What happens next, depends, as follows:

  • On some units, the pause is timed and the unit continues after the allotted time.

  • On others, the cycle can't continue until the water reaches the higher temperature. If you have this type of dishwasher and the water isn't being heated (say, because of a problem with the heating element or thermostat), after the unit stops at the heating cycle, it never continues. When you repair the heating-system problem, the "cycle problem" is fixed too.

Timer Timers don't often fail. But if every other part of the dishwasher seems to be working properly and the timer knob seems to be stuck in one place--doing one function continuously--the timer may be at fault. Dishwasher timers can't be repaired. If yours is defective, replace it.


May 31, 2009 | Bosch SHU4006 Dishwasher

2 Answers

Dishwasher stalls


SOUNDS TO ME YOUR CONTROL MODULE IS NOT WORKING CORRECTLY

Apr 07, 2009 | Bosch SHU4006 Dishwasher

1 Answer

Bosch dishwasher timer sticking


I have been told to replace the timer which I am looking to do the same to my machine!

Mar 24, 2009 | Bosch Dishwashers

1 Answer

Bosch dishwasher timer freezing


There is a recall on the control board of many of these models, butyour problem is likely not related. It sounds like a plugged drain system or a possible bad drain pump. That's why you are hearing the pump running constantly. I have written a guide to help. It is here. Thanks!

Mar 24, 2009 | Bosch Nexxt 300 Series WFMC2201UC

1 Answer

Dial Timer sticks between wash or rinse modes


Hello. Is the water getting hot? Usually the timer won't advance because it isn't getting a signal from the thermostat that is on the bottom of the tub, so it thinks that the water isn't hot enough to go through the rest of the cycle. That is if the water is hot. If it isn't hot then you may need a new heater. You may or may not need a new timer. Try the thermostat first because that is usually the thing that goes out and it is less expensive than the timer. You can order it from www.coastparts.com or www.marcone.com .
Let me know if you need anymore help.

Dec 07, 2008 | Dishwashers

1 Answer

Bosch dishwasher shu4322 has code 1 aqua sensor what is the sensor do and where is it located


Most of the dishwasher has a Thermal hold period in which the machine will not advance to the next cycle until the water temperature reaches a specific degree. it is possible that your aqwa sensor/or heater is bad OR as in most of the cases, the Timer relay that is responsible in turning the heater on is stuck open, in this case you need a new timer. So,Check Timer/Aqua sensor/Heater

Nov 21, 2006 | Bosch 24 in. SHU66C05 Stainless Steel...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

1,121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Dishwashers Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Gabe Gilsrud

Level 2 Expert

98 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18387 Answers

Are you a Bosch Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...